NITECORE Mountable Rechareable Headlamp Red Light User Manual
- June 7, 2024
- Nitecore
Table of Contents
User Manual
NITECORE Mountable Rechareable Headlamp Red Light (HC65/HC65M)
- Triple Light Sources
- USB Rechargeable
- ATR Technology
Technical Data
NOTICE: The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using one 18650 battery (3.7V 3400mAh) under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
- The runtime for Turbo mode is the testing result before starting temperature regulation.
Features
- Multi-output full metal rechargeable headlamp
- Specially designed for outdoor activities such as hiking, trekking and camping
- Utilizes a CREE XM-L2 U2 LED to emit maximum output of 1000 lumens
- Equipped with a high CRI auxiliary white light (CRI≥90) and a red light
- Integrated Precision Digital Optics Technology for extreme reflector performance
- A maximum beam intensity up to 3000cd and a maximum beam distance up to 110 meters
- High efficient constant circuit runs for maximum 800 hours
- 7 brightness levels and 4 special modes
- Intelligent memory function (special modes can not be memorized)
- Intelligent Li-ion battery charging circuit (via Micro-USB charging port)
- A flood lighting system provides 100° beam angle
- Integrated advanced temperature regulation (ATR) technology
- Tilting mechanism allows for 180°adjustment
- Power indicator displays battery voltage (accurate to 0.1V)
- Reverse polarity protection
- Constructed from rugged aero-grade aluminum alloy
- Rugged HAIII military grade hard-anodized aluminum alloy
- IPX8 waterproof (2 meters submersible)
- Impact resistant to 1 meter
Dimensions
HC65
Size: 3.26”×1.31”×1.05” (82.7mm×33.3mm×26.7mm)
Head Diameter: 0.72” (18.3mm)
Weight: 2.21oz (62.7g)
(Bracket, Headband and Battery Not Included)
HC65M
Size: 3.26”×1.97″×1.81″ (82.7mm×50mm×46mm) (NVG Mount Included)
Head Diameter: 0.72” (18.3mm)
Weight: 3.12oz (88.5g)
(NVG Mount Included, Battery Not Included)
Accessories
HC65
NITECORE 18650 Li-ion battery NL1834 (3400mAh), spare O ring, USB cable,
headband, holder
HC65M
NITECORE 18650 Li-ion battery NL1834 (3400mAh), spare O ring, USB cable
Battery Options
Battery Installation
Charging
Operating Instruction (HC65/HC65M)
Battery Installation
Install batteries as shown below:
NOTE:
- Ensure batteries are inserted properly by observing the positive and negative marks indicated in the diagram. The HC65/HC65M will not operate with incorrectly inserted batteries.
- CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
Main Light
ON/OFF
This product uses a two-stage power switch (similar to camera shutter). Access
to its various
functions depends on how hard the switch is pressed.
Turn on: When the light is off, press the power switch all the way down to turn the main light on and enter the previously used mode.
Turn off: When the light is on, press the power switch all the way down to turn the main light off.
Changing Brightness Level
When the main light is on, press the switch partway to cycle through
“Ultralow-Low-Mid-High-Turbo”. (The HC65/HC65M memorizes its previously used
brightness level and returns to it the next time it is turned on.)
Auxiliary Lights
Auxiliary White Light
Turn on: When the light is off, press the switch partway down for over 0.6
second to turn on the
auxiliary white light. Turn off: When the light is on, press the switch all
the way down to turn it off.
Auxiliary Red light and Red Caution Light
Turn on: When the light is off, press the switch all the way down for
over 0.6 second to turn the red light on.
Turn off: When the red light is switched on, press the switch all the way
down to turn it off.
When the red light is on, press the switch partway to alternate between Red
Caution Light and Red Light.
Direct Access to Turbo
- When the main light is off, press the switch all the way down twice in quick succession to enter Turbo.
- When the main light is on, press the switch partway for over 0.6 seconds to enter Turbo; press the switch partway to return the previously used mode.
Accessing Special modes (Strobe/SOS/Beacon)
When the main light or auxiliary lights are on, press the switch all the way down for over 0.6 second to turn on Strobe. After Strobe is turned on, tap the switch repeatedly to cycle through “SOS-Beacon- Strobe”. Press and hold the switch all the way down to exit.
ATR (Advanced Temperature Regulation)
With Advanced Temperature Regulation module, the HC65/HC65M regulates its
output and adapts to the ambient environment, maintaining optimal performance.
Positioning
When the light is off, press the switch partway to turn the position indicator
on. The blue indicator beside the auxiliary light will blink once every 2
seconds to indicate its location. This serves to alert users to the location
of the HC65/HC65M. With the HC65/HC65M fully charged, the HC65/HC65M will
remain operational for 6 months with the position indicator activated, and 12
months in standby with the position indicator deactivated. Turn the light on
again to exit the positioning function.
Power Tips
Every time the battery is installed, the blue indicator will report battery
voltage (to the nearest
±0.1V) For example, when the battery voltage is at a maximum charge of 4.2V,
the power indicator will blink 4 times, followed by 1.5 seconds pause and 2
more blinks before entering the standby status. Different voltages represent
the corresponding remaining battery power levels:
Charging
- HC65/HC65M is capable of charging a protected 18650 Li-ion battery using the included USB cable. Simply loosen the tailcap and install a protected 18650 Li-ion cell, plug one end of the USB cable into the HC65/HC65M’s USB port and the other end into a universal USB port as shown in the adjacent image. Under normal charging conditions, the blue indicator will blink every 1.5 seconds. When charging is complete, the HC65/HC65M will automatically terminates charging, and the blue indicator will illuminate steadily. If a problem (battery damage, reverse polarity etc.) is detected, the HC65/HC65M will stop charging and the blue indicator will blink rapidly.
- Fully charging a depleted 18650 Li-ion battery takes approximately 7 hours.
- During charging, press the switch partway, the blue indicator will blink to report the voltage (refer to the power tips for detail), press the switch partway again to stop report.
Changing Batteries
Change the batteries when the output appears to be dim or unresponsive.
Warranty Service
All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
- the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
- the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
- the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact
a local NITECORE® distributor or send an email to service@nitecore.com
※ All images, text and statements specified herein this user manual are for
reference purpose only. Should any discrepancy occur between this manual and
information specified on www.nitecore.com, Sysmax
Innovations Co., Ltd. reserves the rights to interpret and amend the content
of this document at any time without prior notice.
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm 2601-06, Central Tower,
No.5 Xiancun Road, Tianhe
District, Guangzhou,510623,
Guangdong, China
Thanks for purchasing NITECORE!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>