NITECORE LED Head Torch User Manual
- June 7, 2024
- Nitecore
Table of Contents
NITECORE LED Head Torch User Manual
NITECORE LED Head Torch
Technical parameters
R1SLVOARD| Thrbo| HIGH| MID| LOW| ULTRALOW|
STROBE| SOS| Beacon
---|---|---|---|---|---|---|---|---
| 18000
lumens| 780
lumens
| 240
lumens
| 70
lumens
| 1
lumens
| 1800
lumens| 1800
lumens| 1800
lumens
| 30min| 1h30min| 5h15mIn| 18h| 300h| —| —| —
| 187m| 117m| 63m| 35m| 4m| —| —| —
| 8750cd| 3400cd| 1000cd| 300cd| 405cd| —| —| —
| 1m (Impect Resistant
| 1p68,2m(waterproof AND submersible)
NOTE: The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1, using 1xIMR 18650 battery (3100mAh) under laboratory conditions.
-
The data may vary in real-world use due to different battery use or environmental conditions. The runtime for Turbo or High mode is the testing result before starting temperature
regulation -
The Turbo 1800 lumens requires the use of rechargeable IMR18650 or 18650 Li-ion
batteries with output current higher than 8A. The Turbo is not accessible with CR123A or RCR123A batteries.
R1SLVOARD| Thrbo| HIGH| MID| LOW| ULTRALOW|
STROBE| SOS| Beacon
---|---|---|---|---|---|---|---|---
| 18000
lumens| 780
lumens
| 240
lumens
| 70
lumens
| 1
lumens
| 1800
lumens| 1800
lumens| 1800
lumens
| 30min| 1h45min| 5h45mIn| 16h30min| 330h| —| —| —
| 187m| 117m| 63m| 35m| 4m| —| —| —
| 8750cd| 3400cd| 1000cd| 300cd| 4.5cd| —| —| —
| 1m (Impect Resistant
| 1p68,2m(waterproof AND submersible)
NOTE: The above data has been measured in accordance with the
international
flashlight testing standards ANSI/NEMA FL1, using 1×18650 battery (3500mAh)
under laboratory conditions.
- The data may vary in real-world use due to different battery use or environmental conditions. The runtime for Turbo or High mode is the testing result before starting temperature regulation.
- The Turbo 1800 lumens requires the use of rechargeable IMR18650 or 18650 Li-ion batteries with output current higher than 8A. The Turbo is not accessible with CR123A or RCR123A batteries.
Installation of the diffuser
FEATURES
- A versatile high performance L-shaped headlamp
- Utilizes a CREE XHP35 HD LED to emit maximum output of 1800 lumens
- Integrated “Precision Digital Optics Technology” provides extreme reflector performance · Boasts a peak beam intensity of 8,750cd and a throw distance of up to 187 meters
- A single button offers access to 5 brightness levels and 3 special modes.
- High efficiency constant current circuit board provides maximum runtime of 330 hours.
- The light indicates remaining battery power by flashing (to the nearest±0.1V)
- Flood lighting system produces a wide 100° beam angle
- Advanced temperature regulation (ATR) technology
- Comfortable headband constructed from quality elastic nylon
- Reverse polarity protection prevents damage from incorrectly inserted batteries
- Toughened ultra-clear mineral glass with anti-reflective coating ·
- Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
- IP68 waterproof (two meters submersible)
- Impact resistant to 1 meter
- Magnetic base and tail stand capability
Dimensions
Length:
4.15″105.3mm
Head diameter:
1″×0.95″25.5mm×24.2mm
Tail diameter:
0.94″23.8mm
Weight:
1.81oz51.2g(battery excluded)
Accessories
Spare O ring, button cover, clip, headband, holder, diffuser
Battery options
| TYPE| Nominal voltage| Compatible
---|---|---|---
NITECORE NL1835HP3500mAh| 18650| 3.6v| Y(Recommended)
Rechargeable Li-ion battery| 1mr18650| 3.6v/3.7v| Y(Recommended)
18650 Li-ion battery (output >8A)| 18650| 3.6v/3.7v| Y
Primary lithium battery| CR 123| 3v| Y
Rechargeable Li-ion battery| RCR123| 3.6v/3.7v| Y
18650 Li-ion battery (output<8A)| 18650| 3.6v/3.7v| n
**
**
Battery Installation
As illustrated, insert batteries with the positive (+) end facing towards the
head.
Warning
-
. Ensure batteries are inserted with the positive (+) end pointing to the head. The HC33 will not operate with incorrectly inserted batteries.
-
CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
-
When the power level of IMR18650 Li-ion battery is low, please stop using and recharge the battery.
-
When the HC33 is kept in a backpack, please loosen the tailcap to prevent accidental activation of the flashlight; When the HC33 is left unused for extended periods of time, please remove all batteries to prevent battery leakage.
-
Do not submerge the product in water or any liquid when it has generated sufficient heat, doing so will cause pressure inequalities and significantly increase risk of water damages.
-
The product contains strong magnetic components. DO NOT put it close to objects that tend to suffer from magnetic interference (e.g. bank cards, watches and medical equipment).
-
ON/OFF
Turn on: When the light is off, press the switch for 0.6 seconds to turn on the light. Turn off: When the light is on, press the switch for 0.6 seconds to turn off the light Instant Ultralow: With the HC33 is switched off, tap the switch to enter ultralow mode. Instant Turbo: With the HC33 is switched off, press the switch for about 1.5 seconds to enter turbo mode. -
Adjusting Brightness Levels
With the HC33 is switched on, press the switch repeatedly to cycle through brightness levels of Ultralow-LowMiddle-High-Turbo. (Brightness levels can be memorized) -
Special modes (Strobe/SOS/Beacon)
When the light is off, quickly tap the headlamp switch twice to enter Strobe. After Strobe is turned on, tap the switch repeatedly to cycle through SOS- Beacon-Strobe. Turn off the light to exit. (Special modes can not be memorized) -
ATR (Advanced Temperature Regulation)
With Advanced Temperature Regulation module, the HC33 regulates its output and adapts to the ambient environment, maintaining optimal performance. -
Power Tips
When power is off, every time the battery is installed, tighten the head and tail cap, the light will report battery voltage (to the nearest ±0.1V) For example, when the battery voltage is at a maximum charge of 4.2V, the power indicator will blink 4 times, followed by 1.5 seconds pause and 2 more blinks before entering the standby status. Different voltages represent the corresponding remaining battery power levels:
1×18650 battery:
Low power 3.5V
Note:
- when using two CR123/RCR123 in series, the flashlight only reports the average voltage of the two batteries.
- If it can not report the voltage normally, please loosen the tail cap first, then press the switch for 1 second to ensure the HC33 is power off thoroughly and then tighten the tail cap.
-
Changing Batteries
Recharge the batteries when the output appears to be dim or the brightness levels can not be selected normally. -
Maintenance Every 6 months, wipe the threads of the battery case with a clean cloth followed by applying a thin coating of silicon-based lubricant.
-
Warranty Service
All NITECORE® products are warranted for quality. DOA/defective products can
be exchanged for replacement through a local distributor/dealer within the 15
days of purchase. After 15 days, all defective / malfunctioning NITECORE®
products will be repaired free of charge for a period of 60 months from the
date of purchase. After 60 months, a limited warranty applies, covering the
cost of labor and maintenance, but not the cost of accessories or replacement
parts.
The warranty is nullified in all of the following situations:
- The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
- The product(s) is/are damaged through improper use(i.e. reverse polarity installation).
- The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to service@nitecore.com .The Nitecore official website shall prevail in case of any product data changes
SYSMAX Innovations Co.. Ltd.
TEL: +86-20-83862000
FAX:+86-20-83882723
E-mail-info@nitecore.com
Web: www.nitecore.com
Address:Rm 2601-06 Central Tower NO .5 Xiancun Road
Tianhe District, Gungzhou,510623,Guangdong,china