BODY Universal Smartphone Video Kit Instruction Manual
- June 7, 2024
- BODY
Table of Contents
BY – VG330
Universal smartphone vidwo kit
Instruction
Thanks for purchasing BOYA! BY-VG330 is a universal smartphone video kit that
consists of a BY-MM1 condenser microphone, smartphone clamp, ball head,
extension tube, mini tripod, clamp with cold shoe mount. Lightweight and
compact design, it’s very convenient to take no matter indoor or outdoor
recordings, and on location. No extra accessories required, you can get a
hassle-free audio solution with no compromised sound. It’s well-suited for
video shooting, vlogging, podcasting, and more.
NOTE : Smartphones and LED lights are not included.
Features:
– Universal smartphone video kit
– Ideal for Youtuber, vlogger, videographer
– Fits most smartphones
– Cardioid shotgun microphone
– Tilt and swivel ball head control
– Includes BY-MMI condenser microphone, smartphone clamp, ball head, extension
tube, mini tripod, clamp with cold shoe mount
Specification:
| Transducer. | Electret Condenser |
|---|---|
| Polar pattern: | Cardioid |
| Frequency Response: | 35-18KHz +/-3dEl |
| Sensitivity: | -42dB +/- ldB/OdB=1V/Pa, lkHz |
| Signal to Noise Ratio: | 76dB SRL |
| Plug: | 3.5mm TRS and TRRS connector |
| Dimensions: | Microphone Size: 022.81 mm |
Extension Tube Length: 160-250mm
Weight| 455g
Product Structure:
1. BY-MM1 Shotgun Microphone
2. Rycote’ Lyre Shock Mount
3. Smartphone Clamp
4. Clamp with Cold Shoe Mount
5. Ball Head
6. Mini Tripod
7. Extension Tube
8. Furry Windscreen
What’s the Difference?
1 3.5 mm TRRS connector
– For Smartphones, tablet and computers
2.
0 3.5 mm TRS connector
– For cameras, camcorders, audio recorders, and other audio/video recording
devices.
Quick Setup Guide:
Adjust the height of the feet:
- The mini tripod can be folded up in any position, and before adjusting the angle of the feet, the feet must be folded up.
- Rotate the adjustment screw on mini tripod clockwise to make the feet stand taller.
- Rotate the adjustment screw on mini tripod counter-clockwise to make the
feet stand at a wider angle to make it shorter.
Adjust the ball head:
Turn the ball head locking screw counter-clockwise, then adjust the upper part to your desired position. Turn the ball head locking screw clockwise to tighten.
Adjust the extension tube :
Turn the extension tube locking screw counter-clockwise and adjust the extension tube to your desired height, then turn the locking screw clockwise and make sure it is securely fastened.
Accessories installation
1. If you do not need to shoot at a different height, then mount the ball
head onto the mini tripod directly as shown below.
2. If you need to shoot at a different height, mount the extension tube onto
the mini tripod, ensure it is locked tightly.
3. Mount the ball head onto the extension tube, make sure
it is locked tightly.
www.boya-mic.com
SHENZHEN 3IAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by Shenzhen liayz
Photo Industrial., Ltd. COPY RIGHT 2010-2020
TEL: 400 6131096
Email: salesouboya-mic.com
www.boya-mic.com /
www.jiayz.com