maxima MSB280W Stick Blender User Manual

: June 2, 2024
: maxima

Table of Contents

maxima MSB280W Stick Blender
Introduction
Specifications
ACCESSORIES
General Safety Guidelines
Product Specific Safety Guidelines
First Time Use
Installation
Operation
ASSEMBLY & DISASSEMBLY
Troubleshooting
Cleaning and Maintenance
Guarantee
CIRCUIT DIAGRAM
EXPLODED VIEW
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

maxima MSB280W Stick Blender

maxima-MSB280W-Stick-Blender-product-image

MAXIMA STICK BLENDER
BEFORE USING THIS PRODUCT YOU SHOULD READ THIS USER MANUAL PROPERLY

MAXIMA – NIJVERHEIDinSfWoE@G 2ma3 Axi/maD – 3ho6ll4an1 Rd.cP Mo ImJD- RwEwCw.HmT – TaxiHmE NahoETllHaEndR.LcAoNmDS –
+31 (0) 297 253 969
WWW.MAXIMA.COM
INFO@MAXIMA.COM

Introduction

Thank you for purchasing this Maxima product. To ensure optimal and safe use, please read these instructions completely before attempting to install or use this product
All Maxima products are manufactured with great care and are CE certiﬁed. As a result, our products meet the legal requirements within the European Union with regard to safety, health and the environment. In addition, our products are tested and inspected prior to shipment to ensure product quality and safety.
At Maxima we are very proud of our products and are completely committed to providing you with the best products and service possible. Your satisfaction is our number one priority .
We trust you will enjoy using this product and Thank You for choosing Maxima Kitchen Equipment as your supplier. We hope you will consider Maxima for your future purchases.

Specifications

$maxima-MSB280W-Stick-Blender-fig- $1$$

PRODUCT	MAXIMA STICK BLENDER (MSB)
Model	Product Code
Length (A)	Diameter Ø (B)
MSB 280W-198MM	08410000
363 mm	88 mm
MSB 450W-210MM	08410100
mm	100 mm
MSB 450W-260MM	08410105
433 mm	100 mm
MSB 650W-310MM	08410110
120 mm	310 mm
MSB 650W-410MM	08410115
434mm	120 mm
MSB 850W-460MM	08410120
120 mm	460 mm
MSB 850W-510MM	08410125
434mm	120 mm

NOTE: The above speciﬁcations do not include any attachments. In the chart below you will ﬁnd the available attachments per machines.

ACCESSORIES

Model| Product Code| Net Weight| Length (C)| Diameter Ø (D)| Compatible with machine
---|---|---|---|---|---
FOOT 198MM| 08410010| 0.49 kg| 198 mm| Ø 70mm| 08410000
WHISK 185MM| 08410020| 0.81 kg| 185 mm| n/a| 08410000
WHISK 250MM| 08410240| 0.92 kg| 250 mm| n/a|
FOOT 160MM| 08410200| 0.67 kg| 160 mm| Ø 80 mm|
FOOT 210MM| 08410205| 0.78 kg| 210 mm| Ø 80 mm|
| | | | | 08410100
| | | |
FOOT 260MM| 08410210| 1.01 kg| 260 mm| Ø 80 mm| 08410105
08410110
FOOT 310MM| 08410215| 1.15 kg| 310 mm| Ø 80 mm| 08410115
08410120
| | | | | 08410125
| | | |
FOOT 360MM| 08410220| 1.26 kg| 360 mm| Ø 80 mm|
FOOT 410MM| 08410225| 1.41 kg| 410 mm| Ø 80 mm|
FOOT 460MM| 08410230| 1.54 kg| 460 mm| Ø 80 mm|
| | | | | 08410110
FOOT 510MM| 08410235| 1.68 kg| 510 mm| Ø 80 mm| 08410115
08410120
| | | | | 08410125

General Safety Guidelines

This machine may only be used for the purpose for which it was designed and intended. The manufacturer and supplier are not liable for any damage caused by incorrect operation and improper use.

This is a commercial product and must only be used by a trained professional who has read and fully understands this manual. It must not be used (without supervision) by children or persons with reduced physical, sensory or mental capabilities.
This device is intended for indoor use only.
WARNING! Keep the machine body and electrical plug away from water and other liquids. If either is exposed to a liquid, immediately disconnect the power supply and have the machine checked by a certiﬁed technician. Not following these instructions may cause electric shock, or even death.
Do not use the machine after it has fallen or is damaged in any other way. Have it checked and repaired by a certiﬁed technician.
Do not walk with the appliance while operational and never try to move or carry the machine by the power cord.
ATTENTION! Do not open the casing or try to repair the appliance yourself (unless instructed). This may void warranty or cause damage and hazardous situations.
Do not insert any objects in the casing or openings of the machine.
Only use original and/or designated accessories and spare parts.
Never put your hands or other body parts near the moving parts of the machine while operational.
Always keep an eye on the machine when in use.
Keep all packaging away from children and dispose of packaging in accordance with local, state and national regulations.
Avoid overloading the machine.
The electrical installation must satisfy the applicable local, state and national regulations.
Switch oﬀ the machine before pulling the power plug out of the socket.
Always disconnect the power supply when the machine is not in use. To pull the plug out of the socket, always pull on the plug and not on the cable.
Do not touch the power plug with wet or damp hands.
Keep the power cable away from operating range and do not cover the cable. Also make sure the power cable does not come in contact with sharp or hot objects and keep away from open ﬁre.
ATTENTION! As long as the power plug is in the electrical socket the machine is connected to the electric grid.

Product Specific Safety Guidelines

This machine may only be used for its intended purpose: To mix and blend food products. $maxima-MSB280W-Stick-Blender-fig- $2$$ $maxima- MSB280W-Stick-Blender-fig- $3$$

First Time Use

Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to the machine then immediately contact your supplier. Save all packaging materials in case the machine needs to be returned or inspected by the freight carrier.
Remove any protective ﬁlm from all surfaces(if applicable).
Read this instruction manual completely before attempting to install and operate this product. When in doubt, contact your supplier.
If your machine is supplied with a factory ﬁtted molded plug then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your machine is not supplied with a factory ﬁtted molded plug then a qualiﬁed electrical engineer must be contracted to wire the unit to the power supply.
Before using the appliance for the ﬁrst time, it is recommended to clean the appliance according to instructions (see chapter “Cleaning and Maintenance”).

Installation

Install the required parts & accessories (if applicable).
Plug the power plug into a grounded and compatible socket.

Operation

STARTING AND STOPPING THE BLENDER

Check that the ON/OFF button [3] is in the released position.
Press and hold down the safety button [1] (if present).
Press the ON/OFF button [3], and the blender will start.
To stop the blender, release the ON/OFF button [3] and the safety button [1] will release automatically.

CONTINUOUS OPERATION:
Follow steps 1 to 3 above, then:

4. While the ON/OFF button [3] is activated and the machine is operating, press the lock button [4].
5. Now you can release the ON/OFF button [3], and the appliance will operate continuously.
6. To stop the appliance, press and release the ON/OFF button [3] again.

VARIABLE-SPEED OPERATION
Follow steps 1 to 3 above, then:

4. To change the speed of the motor, turn the variable speed button [2] towards the maximum or minimum as desired. The device is self-regulating. This ensures that once you have selected a speed, it will remain constant, even if the consistency of your mixture changes.
Note: It is advised to start at low speed and gradually increase speed as required

HANDLING AND POSITIONING

For better control, we recommend to hold the blender by the handle with one hand and at the bottom of the body with the other hand.
It is best to tilt the bender at a slight angle. This will help prevent the tip from touching the bottom of the container.
Suﬃciently immerse the shaft/whisk (about 2/3) to avoid splashing. Do not immerse the whisk coupling.
Make sure that the the motor unit and especially the air vents do not come into contact with any liquid.

ASSEMBLY & DISASSEMBLY

Only mount or demount accessories after the device had been switched oﬀ and the power plug is disconnected from the socket.
Align the coupling [5] of the shaft [3] or whisk [6] with the in the transmission [2] of the machine body [1] and insert it. Then turn to lock it in position ﬁrmly. To disassemble, simply follow these instructions in reverse order.

Troubleshooting

The follow overview will help you understand possible problems. However, only qualiﬁed technicians should attempt to open or repair the machine. Contact your supplier when in doubt.

Problem	Possible Cause	Possible Solution
The appliance does not work.

The appliance is switched oﬀ.
The power supply is interrupted.
The voltage is not correct.
The safety button is activated.

|

Switch on the appliance.
Check the power supply, plug in power cable.
Use a compatible power source.
Deactivate the safety button.

The attachments does not rotate.|

Attachment malfunction.
Motor and or coupling defective

|

Clean, repair or replace the attachment.
Contact supplier.

The appliance has stopped working.| Overheated, thermal safety mechanism is activated.| Switch oﬀ, disconnect power and let the appliance cool down. Then restart.

Cleaning and Maintenance

Maintenance and repairs should only be done by a certiﬁed technician.
Regularly check and clean the appliance, its parts and accessories (if applicable).
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance. Instead, have it repaired by a certiﬁed electrical engineer.
Always switch oﬀ and disconnect the power supply before cleaning or maintenance.
If used in a hot or warm preparation, the attachments might become hot. Let them cool down before cleaning or maintenance.
ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning agents. Some cleaning agents may leave harmful residues or cause damage to the machine. Use a mild and food-safe cleaning product instead.
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to the machine.
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the exterior with a damp cloth. Do not use a steamer to clean the appliance
ATTENTION! Never let the power cable or power plug get wet or damp.
Clean the attachments using a soft brush or cloth and warm water with a mild food-safe detergent. Do not clean the parts in a dishwasher. Rinse under tap to remove soap residue. Make sure not to immerse the couplings [5]
Always dry the appliance, parts and attachments after cleaning using a soft cloth.

Storage

Make sure the appliance is cleaned properly before storage.
Coil up the power cable and put it away.
Store in a cool and dry place.

Discarding
When discarding the appliance, do so in compliance with local, state and national regulations.

Guarantee

Thank you for using our products, our company will follow related provisions from our “Algemene Voorwaarden”, and provide you services when you can show us the invoice.
We provide 12-month warranty from the date of purchase (invoice date). In the warranty period, our company is responsible for free parts if there is a device fault or quality problem of spare parts under correct operation.

The following is not included in the free service:

Damages result from transportation, installation, improper connections.
Component damages caused by failing to provide power and voltage as required in technical data.
Damages caused by disassembling products, adjust or change the mechanical and electrical structures without permission.
Damage caused by improper operation, cleaning and maintenance.
Non-man-made damage, such as damages from abnormal voltage, ﬁre, building collapse, lightning, ﬂoods and other natural disasters, and damages from rats and other pests.
Failure in following the manual when operating.
Wearable and expendable parts.
Altered invoice or without invoice.

In line with our policy of continuous development, we reserve the right to alter the product, the packaging or the documentation without prior notice.