ALVEO3D Cable Passageway Power Extension Instructions
- June 8, 2024
- ALVEO3D
Table of Contents
ALVEO3D Cable Passageway Power Extension
Product Information
Specifications
- Extension Cable Length: 1.5m
- Type of Power Connector: DC, Male T-lock/Female panel mount, 2.1mm x 5.5mm
- Maximum Current: 2.5A
- Power Supply Voltage: 24V
- Weight: 200g
Product Usage Instructions
Step 1: Mounting the Cable Passageway
Ensure the Cable Pass-through is securely mounted in the desired location
using the provided screws and nuts.
Step 2: Connecting the Extension Cable
Connect the Male T-lock end of the extension cable to the power source and
the Female panel mount end to the device requiring power.
Step 3: Powering On
Ensure the power supply voltage is compatible (24V) and switch on the power
source to provide power through the cable passageway.
Step 4: Cable Management
Organize and secure excess cable length to prevent tangling or tripping
hazards.
FAQ
-
Q: What is the maximum current supported by the extension cable?
A: The extension cable supports a maximum current of 2.5A. -
Q: Can the Cable Pass-through be painted or customized?
A: The Cable Pass-through is printed in Black PETG and can be customized using appropriate paints or coatings. -
Q: Is technical support available for this product?
A: For technical support, please contact us at [email protected] or visit our website www.alveo3d.com.
TECHNICAL DRAWING
- Extension Cable Length: 1.5m
- Type of Power Connector: DC, Male T-lock/Female panel mount, 2.1mm x 5.5mm
- Maximum Current: 2.5A
- Power Supply Voltage: 24V
- Weight: 200g
- Cable Pass-through Printed in Black PETG, sliding knife, 1.5m extension, and
- AlveoONE adapter.
- 4 M3 cylindrical head screws, 16mm
- 4 hexagonal nuts, 3mm
www.alveo3d.com
for technical support: [email protected]