Alveo3D 3D Resin Printer User Guide
- June 17, 2024
- ALVEO3D
Table of Contents
Alveo3D 3D Resin Printer
Product Information
Specifications :
- Product Name: 3D Resin Printer
- Manufacturer: Alveo3D
- Website: www.alveo3d.com
Product Usage Instructions
Resin Preparation
Before starting the printing cycle, ensure to shake the resin bottle well to mix the contents thoroughly.
Opening the Printer
Open the printer carefully following the manufacturer’s instructions to access the resin tray and other components.
Filling the Resin Tray
Pour the prepared resin into the designated resin tray of the printer. Be cautious not to spill any resin outside the tray.
Printing the 3D Object
Load the 3D model file into the printer software and initiate the printing process as per the printer’s guidelines.
Opening the Bottle
When handling the resin bottle, make sure to open it securely and avoid any spillage.
Automated Cleaning of the Object
Utilize the automated cleaning feature of the printer to clean the printed object efficiently.
Manual Cleaning of the Object
If needed, manually clean the 3D-printed object using appropriate tools and methods recommended by the manufacturer.
UV Light Treatment
After printing and cleaning, subject the object to UV light treatment for optimal curing and finishing.
Removal of Supports
Carefully remove any support structures from the printed object post-printing
to achieve the desired final result.
Post-Treatment Sanding/Painting
If required, perform sanding or painting on the printed object to enhance its appearance following best practices.
Preparing the 3D Printer
Prior to printing, ensure that the 3D printer is properly set up and calibrated according to the manufacturer’s instructions.
Safety Recommendations:
- Wear nitrile gloves to avoid skin contact with resin.
- Use safety glasses to protect your eyes from resin splashes.
- Wear a respiratory mask with an ABEK cartridge to guard against VOC exposure.
- Operate the printer in a filtered/ventilated enclosure for added protection.
Contact Information:
If you have any questions or need further assistance, please visit our website at www.alveo3d.com
FAQ
- Q: How often should I replace the ABEK cartridge in the respiratory mask?
- A: The ABEK cartridge should be replaced as per the manufacturer’s recommendations or when you notice a change in odour or breathing difficulty.
- Q : Can I use different types of resin with this 3D printer?
- A: It is recommended to use compatible resins specified by the manufacturer for optimal printing results and safety.
safety guide
The 3D resin printing cycle: the safety guide
-
Resin preparation (shake the bottle)
-
Opening the bottle
-
Filling the resin tray
-
Printing the 3D object
-
Opening the printer
-
Automated cleaning of the object
-
Manual cleaning of the object
-
UV light treatment
-
Removal of supports
-
Post-treatment sanding/painting
-
Preparing the 3D printer
How to protect yourself
Our recommendation guide
-
Nitrile gloves
Avoid contact of the resin with the skin during handling -
Safety glasses
Prevent resin from splashing into eyes -
Respiratory mask with ABEK cartridge
Protection against VOCs in non-enclosure phases -
Filtered/ventilated enclosure
Filtration of particles and VOCs in the phases without user intervention: Products storage 3D printing- Automatic cleaning UV treatment