HiBOOST Travel Vehicle Cell User Manual
- June 7, 2024
- HiBOOST
Table of Contents
HiBOOST Travel Vehicle Cell
Package Content
Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by new FCC rules. Please contact FCC for details: 1(888)- CALL-FCC
Introduction
Thanks again for purchasing a HiBoost Travel 4G RV Booster. Our new and
improved travel signal booster is precision-engineered products that improve
cellular reception inside of vehicles.
HiBoost’s exclusive cloud-based Signal Supervisor mobile application allows users to monitor the live status of HiBoost cell phone signal boosters remotely from a mobile device anywhere at any time.
If there are any issues while installing a Hiboost cell phone signal booster,
please contact the HiBoost technical support team through the following
options:
24/7 Online Support: Create a ticket or chat via Signal Supervisor App
Phone:972-870-5666 (M-F from 9 am-
5pm)
Email:[email protected]
Website:www.hiboost.com
Pre-Installation Instructions
HiBoost’s vehicle booster unit and antennas must be strategically placed in
order to perform and provide maximum coverage. The HiBoost Signal Supervisor
app will allow users to communicate to the booster via Bluetooth. It will also
allow users to communicate with the booster locally via Bluetooth connection.
Once registered, the user can remotely monitor the booster’s performance.
Note: Signal Supervisor enabled boosters must have access to a Bluetooth
enabled device in order to connect to the booster.
Professional Installation Tips:
-
For a fast and optimized installation, it is strongly recommended that users
install HiBoost products using the Signal Supervisor mobile application -
Completely read the user manual and gather all necessary tools, material and
accessories before installing the booster -
A “soft installation” is recommended before permanently mounting any
equipment – this technique will simplify the installation process by allowing users to identify any potential installation issues beforehand -
The Signal Supervisor App integrates a tool that will help users locate the best location for the outdoor antenna.
-
1, Users can adjust the outdoor antenna to find the best location (Location Out )while the output power meet the maximum value on the APP. Save the maximum gain value at the same time for indoor antenna installation purpose.
-
2, Users can adjust the indoor antenna to find the best location (Location In )while the gain on the APP meets the same value or closes to the value saved while installing the outdoor antenna.
Installation – Signal Supervisor App
Before installing the Signal Supervisor App, please have the booster unit that
is powered on and nearby.
Note: Turn on the Bluetooth feature enabled before attempting to register
the booster to the mobile device.
Step 1: Download the Signal Supervisor App
• The application is available for download through Apple’s App Store or
Google Play
Step 2 : Create a New Account and Log-in
- Launch the app on your mobile device
- Select the HiBoost Server
- Log in with an existing account create a new one
Step 3 : Register the Booster by adding a device on the home menu Go to
My Devices > Add a Device
Step 4 : Access the Quick Installation Guide after registering the
booster. You can also access the guide by following:
Go to My Devices > Select the Booster > Device Details > Quick Install
Guide Note: Bluetooth connections are limited to a range of only 30 feet. If
there are any issues installing the booster, please contact our technical
support team via the Online Support Chat.
Installation – Manual Method
Before beginning the installation, it is important that users survey and plan
the layout of the vehicle booster system. Please review the following
instructions before attempting to install this system.
For C27G-5S-BTW
1. Mount or place the indoor antenna on the location which has been found in the Pre-Installation Instructions called ‘Location In ‘and connect it to the booster
Note : Ensure that the front of the
patch is facing in the direction where you would want signal to be distributed
2. Mount the magnetic antenna to the roof of the vehicle on the location
which has been found in the Pre-Installation Instructions called ‘Location Out
‘and connect it to the booster
3. Plug-in the DC power supply and power on the booster
Note: The booster will flash blue lights that will last for about 20
seconds while it is adjusting to the current network environment.
For C27G-5S-RV
1. Mount or place the indoor antenna on the location which has been found in
the Pre-Installation Instructions called ‘Location In’ and connect it to the
booster
Note: Ensure that the front of the patch is facing in the direction where
you would want signal to be distributed.
2. Mount the magnetic antenna to roof of the vehicle on the location which
has been found in the Pre-Installation Instructions called ‘Location Out ‘and
connect it to the booster
3. Plug-in the DC power supply and power on the booster
Note: The booster will flash blue lights that will last for about 20
seconds while it is adjusting to the current network environment.
For C27G-SS-Truck
1. Mount or place the indoor antenna on the location which has been found in
the Pre-Installation Instructions called ‘Location In ‘and connect it to the
booster
Note: Ensure that the front of the patch is facing in the direction where
you would want signal to be distributed.
2. Mount the magnetic antenna to roof of the vehicle on the location which
has been found in the Pre-Installation Instructions called ‘Location Out ‘and
connect it to the booster
3. Plug-in the DC power supply and power on the booster
Note: The booster will flash blue lights that will last for about 20
seconds while it is adjusting to the current network environment.
Troubleshooting Guide
For more information or technical support, please contact our team.
Phone : 972-870-5666 (Mon-Fri, 9
am – 5 pm CST)
Email : [email protected]
Website : www.hiboost.com
FCC and IC Statements
FCC RF EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instruction for satisfying RF exposure compliance. This transmitte must not be
co located or operating in conjunction with any other antenna or transmitter.
IC RF EXPOSURE STATEMENT
The device 1s compliance with RF exposure limits. The minimum distance from
the body to use the device is 20 CM.
This is a CONSUME R device.
BEFORE USE , you MUST REGISTER THIS DEVICE with your wireless
provider and have your provider’s consent. Most wireless providers consent to
the use of signal boosters. Some providers may not consent to the use of this
device on their network. If you are unsure, contact your provider.
In Canada BEFORE USE ou must meet all re uirements set out in ISED CPC-2-1-05.
You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed least 20 cm (8 inches) from ( MUST NOT be installed within 20 cm of) any person.
You MUST cease operating this device immediately if requested by the FCC (Qr ISED in Canada) or a licensed wireless service provider.
WARNING. E911 location infomation may not be provided or may be inaccurate for calls served by using this device.
This device may be operated ONLY in a fixed location (i.e., may operate in a fixed location only) lo in-building use.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
https://www.sprint.com/legal/fcc_boosters.html
https://verizonwireless.com/solutions-and-services/accessories/register-
signal-booster/
https://support.t-mobile.com/docs/DOC-9827
https://securec45.securewebsession.com/attsignalbooster.com/
Technical Specifications
HiBoost
6210 N Beltline Rd. #110
Irving, TX 75063
(972)870-5666
[email protected]
www.hiboost.com