MANHATTAN Parallel PCi Card User Manual

MANHATTAN Parallel PCi Card User Manual

introduction

Thank you for purchasing this MANHATTAN®  Parallel PCI Card, Model 158220.

The MANHATTAN Parallel PCI Card quickly and easily adds one DB25 port to desktop systems to connect and communicate with a parallel peripheral device while achieving transfer rates of up to 1.5 MBps.
Plus, compliance with PCI 2.3 specifications helps ensure that most desktop computers and connected parallel devices can operate at peak performance.
The easy-to-follow instructions in this manual help make installation of the card quick and simple, so you’ll also soon be enjoying the benefits of these features:

• Supports EPP, ECP and SPP modes
• Fully supports PCI IRQ sharing
• Universal bus power design for 5 V and 3 V
• Automatically selects IRQ and IO address
• Compatible with ISA parallel port addresses for use with legacy devices
• Lifetime Warranty

NOTE: To ensure proper operation, make sure that you complete the driver installation before proceeding with the hardware installation.

System Requirements

• Windows 2000/XP/Server 2003/Vista 32/64-bit
• Available punch-out expansion and PCI slots

Package Contents

• Parallel PCI Card with External DB25 Port
• User manual and driver CD

driver installation

IMPORTANT: Make sure that you’ve completed the driver installation before proceeding with the hardware installation.

Windows 2000 / XP / Server 2003

1. Insert the included driver CD in the PC’s CD-ROM
2. On the desktop, click “Start,” then click “Run.”
3. Enter “D:\PCI_IO\MCS9865\XP\PCISetup.exe,” then click “OK.”
4. Click “Install” to install the
5. Click “Exit” to complete the driver
6. Shut down the PC.
7. Place the PCI card into PCI slot (see Hardware Installation below), then power on the
8. Once the system boots, Windows will automatically start installing the

driver software.

Windows XP-x64 / Server 2003-x64

1. Insert the included driver CD in the PC’s CD-ROM
2. Enter “D:\PCI_IO\MCS9865\XP64\PCISetup.exe,” then click “OK.”
3. Click “Install” to install the
4. Click “Exit” to complete the driver
5. Shut down the PC.
6. Place the PCI card into PCI slot (see Hardware Installation below), then power on the system.
7. Once the system boots, Windows will automatically start installing the  driver software.

Windows Vista

1. Insert the included driver CD in the PC’s CD-ROM
2. Enter “D:\PCI_IO\MCS9865\Vista32\PCISetup.exe,” then click “OK.”
3. Click “Install” to install the
4. Click “Exit” to complete the driver
5. Shut down the PC.
6. Place the PCI card into PCI slot (see Hardware Installation below), then power on the system.
7. Once the system boots, Windows will automatically start installing the driver software.

Windows Vista-x64

1. Insert the included driver CD in the PC’s CD-ROM
2. Enter “D:\PCI_IO\MCS9865\Vista64\PCISetup.exe,” then click “OK.”
3. Click “Install” to install the
4. Click “Exit” to complete the driver
5. Shut down the PC.
6. Place the PCI card into PCI slot (see Hardware Installation below),

then power on the system.

7. Once the system boots, Windows will automatically start installing the

driver software.

Verify Windows Driver Installation

1. From the Control Panel, go to System Properties and click “Device ”
2. Find the “Ports (COM & LPT)” listing and confirm that one “PCI ECP Parallel Port” item is

HARDWARE INSTALLATION

IMPORTANT: Make sure that you’ve completed the driver installation before proceeding with the hardware installation.

1. Turn off your

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCI

4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.

5. Replace the slot bracket’s holding screw to secure the

6. Replace the computer cover and reconnect the power

SPECIFICATIONS

Standards and Certifications

• CE
• FCC
• PCI 3
• WEEE

General

• Parallel DB25 female connection
• Maximum 5 Mbps throughput
• MosChip 9865 chipset
• Requires available punch-out expansion and PCI slots
• Windows 2000/XP/Server 2003/Vista 32/64-bit compatible

Bus

• PCI 3 32-bit, 33 MHz
• Supports 32/64-bit PCI slot
• 5 / 3.3 V bus power

Physical

• Dimensions: 124 x 122 x 23 mm (4.9 x 8 x 0.9 in.)
• Weight: 3 g (2.2 oz.)

MANHATTAN® offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit us online at

Read More About This Manual & Download PDF:

References

• manhattan-products.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>