JOHN LEWIS Finn Integrated Led Semi Flush User Guide
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS Finn Integrated Led Semi Flush User Guide
Finn Integrated Led Semi Flush
Caring for
your product| Indoor use only
Non-Dimmable
Replace bulbs from John Lewis or established brand of the same type and
compatibility
Recommended the fitting should be cleaned with a soft dry cloth.
---|---
Aftercare and
Troubleshooting| Why is the light not working when switched on?
Check your power supply is switched on
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partners
Technical Support on 03301 230106.
Specification| Integrated Led energy efficient LED Module
Rated power: 24W Max
LED light source included, NON REPLACEABLE
Voltage: 220 –240V, 50Hz
IP rating: 20
Weight: 2.5kg
5 year guarantee| At John Lewis & Partners we test every light to high
quality standards so we are
able to offer you a 5 year guarantee.
Recycling| This symbol indicates that this product should not be treated
as
household wastenoanrmd aitl should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for
further
details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China|
Please retain these instructions for future reference
Introduction| Thank you for purchasing this Finn Integrated LED Semi
Flush.
Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
---|---
Warnings| This product is Class II.
This fitting should be fitted in accordance with IEE Regulations and the
Building
Regulations. If in any doubt, or where required by law, consult a competent
person who is registered with an electrical self-certification scheme.
Further information is available online or from your Local Authority.
To prevent electric shock,switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity
supply
without your knowledge.
If you are in any doubt, please consult a qualified electrician.
If replacing an existing fitting, make a note of the connections.
The flexible cable of this product is not replaceable. If damaged, the product
shall be
disposed of.
It is the installer’s responsibility to ensure that the fixings and wall plugs
used are
suitable for the surface you are fixing your product on
CAUTION! The LED Module and surrounding parts can become
hot during use.
Integrated LED| LED Lifespan: Up to 25,000 hours
Colour Temperature: Bright White
24Watt / 1440Lumens LED Non replaceable
---|---
Product assembly
| Ensure the mains
electricity supply switched off at the
fuse board.
Step 1
If removing an existing fitting, note down all wiring connections.
Ensure that the bracket (supplied) is fixed to a wooden
joist in the ceiling using screws (supplied) or use a
suitable fixing to the ceiling which will support the
weight of the fitting.
The weight of the fitting must be supported by the
suspension bracket and not the flexible cable.
---|---
| Step 2
Connect cables to terminals as shown below.
Check all wires are tight in the terminal block and no
loose strands are left out.
Cover with insulating tape (not included).
| Step 3
Push up ceiling cup and secure with metal grub screws.
| Step 4
Switch on the electricity supply at the fuse board.
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More