JOHN LEWIS Mykki Floor Light User Manual
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS Mykki Floor Light User Manual
Mykki Floor Light
Caring for
your product| We recommend cleaning with a soft dry cloth. Do not use
abrasive materials as these will damage the finish.
---|---
Aftercare and
Troubleshooting| If you experience any unresolvable technical issues with
the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partner
Technical Support on 03301 230106.
Specification| Max. power: 25W Voltage: 220–240V, 50Hz IP rating: 20
Weight: 4.2kg
5 year guarantee| At John Lewis & Partners we test every light to high
quality standards so we are able to offer you a 5 year guarantee.
Recycling| This symbol indicates that this product should not be treated
as
normal household waste and it should be recycled. John Lewis & Partners
do not operate instore take back, but as members of the Distributor
Take Back scheme have funded the development and upgrade of
recycling facilities across the UK. Please take it to your nearest
collection facility or for further details contact your local council
or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China| Please retain these instructions for future reference
Recommended bulb
Product assembly
Recommended bulb (included)
1 x 4W GU10 LED
Energy efficient bulb
When changing a bulb, always switch off at the mains and allow the bulb to
cool before handling. Dispose of used bulbs carefully. Do not exceed the rated
power stated or use a different shape bulb from that indicated on the fitting.
Product assembly
Refer to assembly drawing opposite. Carefully unpack the carton, making sure
all the parts are present and all packaging has been removed before assembly.
Gently pull out the protectors from the tube ends. Do not plug in or use this
product until it has been fully assembled. Disconnect from mains during
assembly or maintenance.
Screw tube A on to the top section in a clockwise direction, followed by tubes
B and C. Take care not to trap the cable or cross the thread. Locate the end
of tube C on to the base. Gently pull any excess cable through from under the
base and out through the side of the base. Screw the stem on to the base
thread, taking care not to trap the cable or cross the threads. Once the stem
has been screwed onto the base, it will be necessary to align the head with
the cable coming out of the base. The central nut underneath
the base has been left slightly loose for this purpose. Rotate the head to
align with the cable and fully tighten the nut. A spanner is supplied for
this purpose.
Do not use the lamp until the nut has been fully tightened and the stem is
securely fixed.
Stand the product upright and check the tightness of the joints. Fit the bulb
per the instructions overleaf.
Your standard lamp is now ready to use. Switch on using the floor switch.