D-Link Wireless N300 VDSL2 Router with ADSL2+/Ethernet WAN User Manual
- June 7, 2024
- D-Link
Table of Contents
D-Link Wireless N300 VDSL2 Router with ADSL2+/Ethernet WAN User Manual
Product Highlights
-
HIGH-SPEED CONNECTION
VDSL2/VDSL/ADSL2+/ ADSL2/ADSL, Fast Ethernet -
802.11N
Faster rate and superior wireless range -
IPV6 SUPPORT
All needed functions for up-to-date networking
Wireless N300 VDSL2 Router with ASDL2+/Ethernet WAN Support
DSL Port and 4-port Switch, Ethernet WAN Support
The router is equipped with a DSL port to connect to a high-speed VDSL line. The built-in 4-port switch enables you to connect Ethernet-enabled computers, game consoles, and other devices to your network. In addition, any Ethernet port of the device can be used to connect to a private Ethernet line.
Wireless Interface
Using the DSL-224 device, you are able to quickly create a wireless network at
home or in your office, which lets computers and mobile devices access the
Internet virtually anywhere (within the operational range of your wireless
network). The router can operate as a base station for connecting wireless
devices of the standards 802.11b, 802.11g, and 802.11n.
Secure Wireless Connection
The router supports multiple functions for the wireless interface: several
security standards (WEP, WPA/WPA2), MAC address filtering, WPS, WMM.
In addition, the device is equipped with a button for switching the Wi-Fi
network off/on. If needed, for example, when you leave home, you can easily
switch the router’s WLAN by pressing the button, and devices connected to the
LAN ports of the router will stay online.
Advanced Capabilities of Wireless Network
Support of guest Wi-Fi network allows you to create a separate wireless
network with individual security settings and maximum rate limitation. Devices
connected to the guest network will be able to access the Internet, but will
be isolated from the devices and resources of the router’s LAN.
Security
The wireless router DSL-224 includes a built-in firewall. The advanced
security functions minimize threats of hacker attacks, prevent unwanted
intrusions to your network, and block access to unwanted websites for users of
your LAN.
Built-in Yandex.DNS service protects against malicious and fraudulent web
sites and helps to block access to adult content on children’s devices.
Easy configuration and update
You can configure the settings of the wireless router DSL-224 via the user-
friendly web-based interface (the interface is available in several
languages).
The fast and easy configuration wizard allows you to specify all needed
parameters in several simple steps.
Also DSL-224 supports configuration and management via mobile application for
Android and iPhone smartphones.
You can simply update the firmware: the router itself finds approved firmware
on D-Link update server and notifies when ready to install it.
Hardware
Processor| RTL8685S (500MHz)
RAM| 32MB, DDR2 SDRAM
Flash| 8MB, SPI
Interfaces|
- RJ-11 DSL port
- 4 10/100BASE-TX LAN ports
LEDs|
- POWER
- INTERNET
- DSL
- 4 LAN LEDs
- WLAN · WPS
Buttons|
- POWER button to power on/power off
- RESET button to restore factory default settings
- WPS button to set up wireless connection
- WIFI button to enable/disable wireless network
Antenna| Two external non-detachable omnidirectional antennas (5dBi
gain)
MIMO| 2 x 2
Power connector| Power input connector (DC)
DSL Parameters
VDSL/ADSL Standards|
- VDSL2: ITU G.993.2, support of 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a profiles
- ADSL: Multi-mode, ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2 (G.lite) Annex A, ITU-T G.994.1 (G.hs)
- ADSL2: ITU-T G.992.3 (G.dmt.bis) Annex A/L/M, ITU-T G.992.4 (G.lite.bis) Annex A
- ADSL2+: ITU-T G.992.5 Annex A/L/M
ATM/PPP Protocols|
- Bridged and routed Ethernet encapsulation
- VC-based or LLC-based multiplexing
- ATM Forum UNI3.1/4.0 PVC (up to 8 PVCs)
- ATM Adaptation Layer Type 5 (AAL5)
- ITU-T I.610 OAM F4/F5 loopback
- ATM QoS
- PPP over ATM (RFC 2364)
- PPP over Ethernet (PPPoE)
- Keep-alive for PPP connections
Software
WAN connection types|
- PPPoA
- PPPoE
- IPv6 PPPoE
- PPPoE Dual Stack
- IPoA
- Static IPv4 / Dynamic IPv4
- Static IPv6 / Dynamic IPv6
- Bridge
Network functions|
- DHCP server/relay
- Advanced configuration of built-in DHCP server
- Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation
- DNS relay
- Dynamic DNS
- Static IP routing
- Static IPv6 routing
- IGMP Proxy
- IGMP snooping
- RIP
- Support of UPnP IGD
- Support of VLAN
- WAN ping respond
- Support of SIP ALG
- Support of RTSP
- LAN/WAN conversion
Firewall functions|
- Network Address Translation (NAT)
- Stateful Packet Inspection (SPI)
- IPv4/IPv6 filter
- MAC filter
- URL filter
- DMZ
- Prevention of ARP and DDoS attacks
- Virtual servers
- Built-in Yandex.DNS web content filtering service
VPN|
- IPsec/PPTP/L2TP/PPPoE pass-through
QoS|
- Interface grouping
- VLAN priority (802.1p)
Management and monitoring|
- Local and remote access to settings through TELNET/WEB (HTTP/HTTPS)
- Multilingual web-based interface for configuration and management
- Support of D-Link Assistant application for Android and iPhone smartphones
- Firmware update via web-based interface
- Automatic notification on new firmware version
- Saving/restoring configuration to/from file
- Support of logging to remote host
- Automatic synchronization of system time with NTP server and manual time/date setup
- Ping utility
- Traceroute utility
- TR-069 client
Wireless Module Parameters
Standards| IEEE 802.11b/g/n
Frequency range| 2400 ~ 2483.5MHz
Wireless connection security|
- WEP
- WPA/WPA2 (Personal/Enterprise)
- МАС filter
- WPS (PBC/PIN)
Advanced functions|
- WMM (Wi-Fi QoS)
- Information on connected Wi-Fi clients
- Advanced settings
- Guest Wi-Fi / support of MBSSID
- Limitation of wireless network rate
- Periodic scan of channels, automatic switch to least loaded channel
- Autonegotiation of channel bandwidth in accordance with environment conditions (20/40 Coexistence)
Wireless Module Parameters
Wireless connection rate|
- IEEE 802.11b: 1, 2, 5.5, and 11Mbps
- IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
- IEEE 802.11n: from 6.5 to 300Mbps (from MCS0 to MCS15)
Transmitter output power
The maximum value of the transmitter output power depends upon the radio frequency regulations applied in your country.
|
-
802.11b
15dBm (+/-1dB) -
802.11g
14dBm (+/-1dB) -
802.11n
14dBm (+/-1dB)
Receiver sensitivity|
- 802.11b
-86dBm - 802.11g
-72dBm - 802.11n
HT20
-67dBm
HT40
-65dBm
Modulation schemes|
- 802.11b: CCK (11, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps), DSSS
- 802.11g: PSK/CCK, DBPSK, DQPSK, OFDM, BPSK, QPSK, 16QAM, 64QAM
- 802.11n: PSK/CCK, DBPSK, DQPSK, OFDM, etc.
Physical Parameters
Dimensions (L x W x H)| 205 x 139 x 32 mm (8 x 5.5 x 1.3 in)
Weight| 260 g (0.6 lb)
Operating Environment
Power| Output: 12V DC, 1A
Temperature|
- Operating: from 0 to 40 °C
- Storage: from -20 to 70 °C
Humidity| From 5% to 95% (non-condensing)
Delivery Package
- Router DSL-224
- Power adapter DC 12V/1A
- RJ-11 telephone cable
- Ethernet cable
- Splitter
- “Quick Installation Guide” (brochure)
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas
subsidiaries. All other trademarks belong to their respective owners.
D-Link Russia
Web: http://www.dlink.ru
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>