audioengine S8 Wireless Subwoofer User Guide
- June 7, 2024
- audioengine
Table of Contents
audioengine S8 Wireless Subwoofer User Guide
S8 Wireless Subwoofer Setup
The W3 Wireless Audio Adapter, which is part of the 58 Wireless Subwoofer
system, will allow you to send music wirelessly from any
music system with an audio output to the 58 Subwoofer. Here are the two most
common setups to make your 58 subwoofer wireless using the Audioengine W3
wireless adapter kit.
-
Connect the W3 power supply to the W3 Sender and plug the W3 power supply into a functioning AC power outlet.
-
Connect a mini-jack audio cable from the W3 Wireless Sender to your music system audio out or subwoofer output.
-
Connect the W3 power supply to the W3 Sender and plug the W3 power supply into a functioning AC power outlet.
-
If your powered speakers or AV receiver has RCA-style audio outputs or sub outputs, connect the included RCA adapter “Y” cable to the W3 Sender.
-
Connect an RCA cable (included with your powered speakers or AV receiver) between the RCA “Y” adapter cable and your music source subwoofer out.
-
Connect the included mini-jack cable from the W3 Receiver to audio input on the rear panel of the 58 subwoofer.
-
Power on the 58 subwoofer. The status indicators on the W3 Sender and Receiver will both blink briefly and will then go solid, indicating they
are paired and ready to play your music. For instructions on setting up the 58 Subwoofer, refer to the 58 Quick start Guide.
Need Help?
Visit: audioengine.com/support
Email us: support@audioengineusa.com
Call us: 855-845-5525
S8 Subwoofer Setup
Here are two of the most common connection options to connect the S8 subwoofer
to your music system, stereo receiver, or
powered speakers.
-
Connect a 3.5mm mini-jack audio cable from an output of your stereo receiver, powered speakers,
or any music system with an output, to the S8 subwoofer input. -
Connect an RCA stereo cable from an output of your stereo receiver, powered speakers, or any music system with an
output, to the S8 subwoofer input.
If your stereo receiver or music system has a single RCA sub out or LFE
output, connect an RCA cable from this output
to the S8 sub RCA left (L) input.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>