audioengine 2+ Premium Powered Desktop Speaker User Guide
- June 3, 2024
- audioengine
Table of Contents
Audioengine 2+ Premium Powered Desktop Speaker
Basic Safety Instructions
- Read these instructions for all components before using this product.
- Keep these instructions for future reference.
- Heed all warnings on the product and in the owner’s guide Follow all instructions.
- Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.
- Clean only with a dry cloth and as directed by the manufacturer. Unplug this product from the wall outle before cleaning.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. To ensure reliable operation of the product and to protect it from overheating, put the product in a position and location that will not interfere with its proper ventilation. For example, do not place the product on a bed, sofa, or similar surface that may block the ventilation openings. Do not put it in a built-in system, such as a bookcase or a cabinet that may keep air from flowing through it’s ventilation openings.
- Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong are provided for your safety. If the provided plug does not fit in your outlet, consult and electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments or accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket or table When a cart is used, use caution when moving the cart/ apparatus
CAUTION: RISK OF ELECTRICAL SHOCK DO NOT OPEN
Introduction
Welcome to the Audioengine family and congratulations on your purchase of the
A2+ Premium Powered Desktop Speakers. The Audioengine team is dedicated to
bringing you the highest quality listening experience possible and the A2+ is
designed with the same attention to detail and operational simplicity
as other Audioengine products. Our goal is to get you to your music as simply
as possible without all the “gadget tinkering” that other products generally
require. As with our other past efforts, we thank all our customers and
resellers for helping us create another great Audioengine product!
Unpacking
Your Audioengine speakers were carefully tested and inspected before packaging
and shipping. After unpacking please
check for any damage. It is rare that a unit is damaged during shipping, but
if this does happen contact the shipping company immediately. We recommend
that you keep the original carton and packing material for any possible future
shipping.
What’s in the box
- (1) A2+ powered (left) speaker
- (1) A2+ passive (right) speaker
- (1) Speaker wire, 2 meters (~6.5 feet)
- (1) Power supply
- (1) Power cord
- (1) Mini-jack audio cable, 1.5 meters (~5 feet)
- (1) USB cable, 1.5 meters (~5 feet)
- (2) Microfiber speaker bag
- (1) Microfiber power supply bag
- (1) Microfiber cable bag
- (1) Setup guide
- (1) Product line brochure
Cleaning
Your A2+ speakers are designed for years of use with no maintenance as long as
you avoid exposure of the speakers to moisture or high temperatures. The hand-
finished MDF wood cabinets are very durable and are easily cleaned by wiping
down with a soft, dry cloth. We do not recommend using cleaners or solvents.
Placement
Place your Audioengine 2+ speakers at a comfortable listening location with no
obstructions at the front or back. If you find that raising them to an angle
produces the best sound, this is easily achieved by adding the DS1 Desktop
Stands (available separately). We recommend at least 3 inches of clearance
around the back of the cabinet for good air circulation.
Features
- Built-in power amplifiers
- Dual audio inputs
- USB computer audio input
- Variable audio output
- High-quality connectors
- Custom Kevlar woofers and silk dome tweeters
- Power-saving idle mode
- Hand-built cabinets
- Magnetically shielded
- Cables included
Setup and Operation
Step 1 – Connecting the speaker wire
Speaker wire connection
- Use your thumb and finger to unscrew the connectors.
- Insert each speaker wire into the holes on the side of the connectors.
- Retighten the connectors with your fingers.
- The bare portion of the wire should be secured firmly in each connector.
Repeat the procedure to connect the other end of the speaker wire to the other
speaker. Check to make sure none of the speaker wire strands have come in
contact with a nearby connector. As the A2+ speakers have power amplifiers
built inside, do not connect the speaker terminals to the speaker outputs of a
stereo receiver.
Step 2 – Connecting the Power Supply
Power cord connection
Verify that the volume/power switch on the rear panel of the left speaker is in the OFF position by rotating it counterclockwise until it clicks off.
- Connect the cable from the power supply to the left speaker rear panel.
- Connect the power cable to the other end of the power supply.
- Connect the power cable to an AC power outlet.
- Verify that the LED indicator on the power supply is illuminated.
- Use only the power supply provided with the speakers.
Step 3 – Connecting an Audio Source
Using the appropriate audio cable, connect the speaker inputs to your audio
source (computer, iPhone, iPad, etc.). One example is shown in the diagram.
Computer to A2+ audio input
Another option for connecting a computer to A2+ is via USB audio. Using the included USB cable, connect as shown in the diagram.
Computer USB to A2+
For PC, the A2+ should be recognized automatically. For Mac, under System Preferences/Sound/Output, select “Audioengine 2+” For advanced setup tips visit: audioengineusa.com
Step 4 – Enjoying your Speakers
- Turn on the rear panel volume/power knob and set the volume control to about 3 o’clock.
- Turn on your audio source and adjust the volume to your desired listening level.
Two audio sources may be connected to the speakers at the same time. To adjust the volume, we recommend using individual volume controls on each source. We recommend using a high-quality surge suppressor and/or AC line filter on all electronic equipment.
Basic Troubleshooting
If the LED indicator on the power supply is not illuminated:
- Check to see that the power cord is securely connected to the power supply and to an AC power outlet.
- Check that the AC power outlet is supplying power.
If the speakers do not produce sound:
- Check that the cable from the power supply is connected to the rear panel and that the LED indicator on the power supply is illuminated.
- Check that the volume/power knob on the rear panel is not set to minimum volume or powered off (we recommend at least a 10 o’clock position).
- Check that the volume level of your audio source is not set to minimum or powered off.
- Check that the wire from your audio source to your speakers is properly connected (occasionally the 1/8” cable feels as if it is inserted all the way, but is not).
If the speakers produce sound from the left speaker but not the right:
- Check that the speaker wires are correctly connected between the left and right speaker connectors.
- Check that the cable from your audio source to the speakers is properly connected.
If the sound is distorted:
- Decrease the volume of the input audio source and increase the volume of the speakers.
Warranty
Period
All Audioengine products have a 3-year Limited Warranty on parts and labor
from date of purchase. Your warranty is auto-matic, so there is no need to
register. This Limited Warranty applies only to Audioengine products purchased
in the Continental United States. For Limited Warranty coverage elsewhere,
please contact your Audioengine dealer, reseller, or distributor.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by accident,
misuse, abuse, neglect, excessive moisture, lightning, power surges, other
acts of nature, unauthorized prod-uct modification or repairs, or failure to
follow the instructions outlined in the Setup Guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge at any time during the warranty
period. After service, we will be responsible for shipping the product back to
you at our expense.
What we ask from you
You will be responsible for shipping or transportation charges directly to
Audioengine or to an authorized dealer. We recommend that you keep the
original shipping materials, as it is important that you package the product
so that it will not be damaged during shipping. Audioengine cannot be
responsible for any damages incurred during shipping due to poor packing, so
please pack well and make sure to insure your shipment.
How to obtain Audioengine Warranty service
If you have any questions about your warranty coverage or you think you may
need service, email the Audioengine Authorized Service Center at:
[email protected] or call toll-free in the United States at
877-853-4447. We will do everything we
can to answer your questions and resolve any issues as quickly as
possible.
Exclusive Remedy
This Limited Warranty is fully transferable provided that the current owner
furnishes the original proof of purchase and that furnishes the original proof
of purchase and the serial number on the product is intact. THE MAXIMUM
LIABILITY OF AUDIOENGINE SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY
YOU FOR THE PRODUCT. IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL,
INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES.
Product Returns and Refunds Your satisfaction is guaranteed! Should you have a
problem or are not satisfied with any Audioengine product, send us an email
at: [email protected] or call
toll-free in the United States at
877-853-4447.
General Specifications
-
Type: 2.0 powered multimedia speaker system
-
Power output: 60W peak power total (15W RMS / 30W peak per channel), AES
-
Inputs: 1/8” stereo mini-jack, RCA, USB
-
Voltages: 110-240V, 50/60Hz auto-switching
-
Amplifier type: Dual Class AB monolithic
-
Drivers: 2.75” Kevlar woofers, 20mm silk dome tweeters
-
Signal-to-noise: > 95dB ypica(l t -weigAhted)
-
THD: <0.05% t awaelrl pseottings
-
Crosstalk : <50db
Frequency esponrse: 65Hz-2 2kHz +/-2.0dB -
Sensitivity: 88db SPL (1w@1m)
-
Input impede: danc10K ohms ed unbalanc
-
Protection: Output rentc ur li,m itinmg atlh evrer-teom perature, wer PO ona/office not otterctpior n
-
Dimensions (ea6c”h(H): ) W )x x4 ”)( 5.25”(D
-
Weight ): (LEFT 4lbs
-
Weight ()R: RIGHT 3l bs
-
Shipping weight: 4.6 kg (~10lbs) per pair Shipping x bo d1im0.s5:” (H ) (LWx) ) ( x1 5” 7”
-
Materials oannsdtr uction: C 18mm thick MDF cabinets 20mm silk dome tweeters with neodymium magnets 2.75“ Kevlar woofers with advanced voice coils
About Audioengine
Audioengine designs and builds innovative audio products with all your music
in mind. Great sound, simple but elegant designs, high-quality materials, and
truly useful features are what Audio-engine is all about. We sincerely hope
you get as much enjoy-ment from our products as we’ve had creating them! For
infor-mation about our other products go to:
www.audioengineusa.com
Support
If you have any questions or feel you may need service contact the reseller
where you purchased your A2+ or feel free to email us directly at:
s[email protected] or call toll-
free in the United States: 877-853-4447
- [email protected]
- audioengineusa.com
- © 2006-2013 Audioengine Ltd. All Rights Reserved.
- Copyright Notice
- Audioengine and Audioengine A2+ are trademarks of Audioengine Ltd.
Documents / Resources
|
audioengine 2+ Premium Powered Desktop
Speaker
[pdf] User Guide
2 Premium Powered Desktop Speaker, 2 Premium Powered Speaker, Speaker, Premium
Speaker, Desktop Speaker
---|---