BRAUN Hand Blender Multiquick 7 User Manual

Multiquick 7
Typ 4199
www.braunhousehold.com
www.braunhousehold.co.kr

De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-lsenburg/Germany

5722110904/09.13
China/Korea/UK

Our products are engineered to meet the highest standards of quality, functionality, and design. We hope you thoroughly enjoy your new Braun appliance.
For interesting recipe  ideas and videos, please go to www.braun.com

**Before use

**

Please read the use instructions carefully and completely before using the appliance.

Caution
• The blades and the tools (15a,b) are very sharp! To avoid injuries, please handle them with utmost care.
• Always unplug the appliance when it is left unattended and before assembling, disassembling, cleaning, and storing.
• The appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities unless they are supervised by a person responsible for their safety. Keep the appliance out of reach of children to ensure that they do not play with it.
• Before operating the food processor attachment, make sure that the lid interlock (10d) is properly clicked in and that the pusher (10b) is in place.
• Do not insert other tools than the pusher (10b) into the filling tube during processing.
• Do not hold the motor part (4) nor the whisk gearbox (8a) under running water, nor immerse them in water.
• The lid (10) can be cleaned under running water, but do not immerse it in water, nor clean it in a dishwasher.
• Braun electric appliances meet applicable safety standards. Repairs or the replacement of the mains cord must only be done by authorized service personnel. Faulty, unqualified repair work may cause considerable hazards to the user.
• Before plugging into a socket, check whether yoLir voltage corresponds to the voltage indicated on the appliance.
• The appliance is constructed to process normal household quantities. • The beaker (7) and the bowl (11) are not microwave-proof.

Description

(see table on p. 3)

1. Safety button

2. Pilot light

3. Smart speed switch / variable speeds

4. Motor part

5. Release buttons

6. Blender shaft

7. Beaker

8. a Gearbox b Whisk

9. Compact kitchen machine accessory

10. Lid
    10a Coupling for motor part
    10b Pusher
    10c Filling tube
    10d Lid interlock

11. Bowl

12. Anti-slip ring

13. Blade

14. Kneading tool

15. Tool holder
    15a Slicing tool
    15b Shredding tools (fine, coarse)

Please clean all parts before Listing for the first time (see paragraph «Cleaning» / table C).

 Pilot light

The pilot light (2) shows the status of the appliance when it is connected to an electrical outlet.

switched on
Red| The appliance is overheated. Let it cool down. It is ready for use again when the pilot light nasheed

Smartspeed technology

Smart speed switch for variable speeds

One squeeze, all speeds. The more you press, the higher the speed (fig. A). The higher the speed, the faster and finer the blending and chopping results. One-handed operation: the Smart speed switch (3) allows you to turn on the motor part and control the speed with one hand.

How to use the appliance

First use: Remove the transportation lock from the motor part (4) by pulling it at the red strap.
Switching on (see p. 3/fig. A)

The appliance has a safety button. To safely switch it on, follow these points:

1. First press the safety button (1) with your thumb and hold. The pilot light will light up permanently green.

2. Then directly press the Smart speed switch (3) according to the desired speed.
   If the Smart speed switch (3) is not pressed within 5 seconds, the appliance cannot be switched on for safety reasons. The pilot light flashes red. In order to switch the appliance on, start again with step1.

3. During operation, you do not have to keep the safety button

Hand blender (see p. 3/fig. B)

The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise, and baby food as well as for mixing drinks and milkshakes.
For best blending results use the highest speed.

• Click the motor part (4) into the blender shaft (6).
• Position the hand blender deep in a beaker or bowl. Then switch the appliance on as described above.
• After use unplug and press the release buttons (5) to detach the motor part.

When blending directly in the saucepan while cooking, remove the pan from the stove first to avoid splashing of the boiling liquid (risk of scalding!).

Recipe example: Mayonnaise
200—250ml oil
1 egg (yolk and white)
1 tbsp. lemon juice or vinegar, salt, and pepper to taste

Put all ingredients into the beaker according to the above-mentioned order. Introduce the hand blender to the base of the beaker. Switch it on and use maximum speed (fully press the Smart speed switch). Keep the hand blender in this position until the oil begins emulsifying. Then, without switching off, slowly move it up and down until the mayonnaise is well combined.

Whisk (see p. 3/fig. B)

Use the whisk only for whipping cream, beating egg whites, and mixing sponges and ready-mix desserts.

• Insert the whisk (8b) into the whisk gearbox (8a) then click the motor part (4) into the gear
• Place the whisk in a bowl and only their switch the appliance
• After use, unplug and press the release buttons (5) to detach the motor Then pull the whisk out of the gearbox.

Tips for best results

• Use a medium-sized bowl.

• Move the whisk clockwise, holding it slightly inclined.

• Whipped cream (max. 400 ml chilled cream, 30% fat content, 4-8 “C): Start with low speed (light pressure on the switch) and increase the speed
  (more pressure on switch) while whipping.

• Beaten egg whites (max. 4 eggs): Start with a medium speed (halfway pressure on switch) and increase the speed (more pressure on switch) while

Compact kitchen machine accessory

The compact kitchen machine accessory (9) is perfectly SLiited for

• chopping and blending
• kneading dough (based on 250 g flour)
• slicing and shredding

Chopping (see p. 4/fig. D)

Using the blade ( 13) you can chop meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc.
For best results, please refer to the maximum quantities and speed settings indicated in the processing tables of sections D and E.
Do not chop extremely hard food, such as ice cubes, same coffee beans or grains.

Before chopping …

• pre-cLit meat, cheese, onions, garlic, carrots, chillies
• remove stems from herbs, shell nuts
• remove bones, tendons and gristle from meet
• always make sure that the anti-slip ring (12) is attached to the chopper bowl

Caution: The blade is very sharp! Always hold it by the upper plastic part and handle it carefully.

Carefully remove the plastic cover from the blade.

1. Place the blade on the centre pin of the bowl (11) and give it a turn so that it
2. Fill the bowl with Attach the lid (J0) onto the bowl with the interlock (10d) positioned next to the bowl handle.
3. To lock the lid, turn it clockwise so that the interlock engages with a «click» above the handle.
4. Insert the motor part (4) into the coupling (10a) until it locks.
5. Plug in the appliance and make sure the pusher is in place.
6. Switch the appliance on and hold the bowl with the other hand.
7. After use unplug and press the release buttons (5) to remove the motor Remove the pusher.
8. Press the lid interlock (10d) and hold Turn the lid (10) counter-clockwise to unlatch it.
9. Lift the lid up.
10.  Carefully take out the blade before removing the processed food. To remove the blade, slightly turn it then pull it off.

Mixing light dough

Using the blade (13), you may also mix light dough like a pancake batter or a cake mixture based on up to 250 g flour.

Recipe example: Pancake batter

First, pour 375 ml milk into the bowl, then add 250 g flour and finally 2 eggs. Using full speed, mix the batter until smooth.

Kneading dough

Picture section D also applies for the Lise of the kneading tool. The kneading tool (14) is ideal for kneading different dough types like yeast dough or pastry (based on max. 250 g flour).

• Place the kneading tool into the bowl (11).
• Fill the bowl with 250 g flour, then add the other ingredients except for liquids.
• TLirn the appliance on a full
• Add liquids through the filling tube while the motor is
• Maximum kneading time: 1 minute — then allow the motor part to cool down for 10 minutes.

Recipe example: Pizza dough
250 g flour,  1/2 tsp salt, 1/2 tsp dried yeast, 5 tbsp olive oil, 150 ml water (lukewarm).

Recipe example: Pastry (for quiche, cake)
250 g flour, 170 g butter (cold/hard, small pieces), 80 g sugar, 1 vanilla sugar, 1 small egg, 1 pinch salt For good results, do not use warm, soft butter.

Stop kneading shortly after the dough has formed a ball. The dough will become too soft from excessive kneading.

Slicing/shredding (see p. 5/fig. E)
Using the slicing tool (15a), you can slice e.g. cucumbers, onions, mushrooms, apples, carrots, radishes, raw potatoes, courgettes, cabbage.
Using the shredding tools (15b), you can shred e.g. apples, carrots, raw potatoes, beetroot, cabbage, cheese (soft to medium).

1. Place a tool (15a,b) into the tool holder (15) and snap into Place the tool holder on the centre pin of the bowl and make sure it locks into place.
2. Attach the lid (J0) onto the bowl with the interlock (10d) positioned next to the bowl handle.
3. To lock the lid, turn it clOCkwise so that the interlock engages with a «click» above the handle.
4. Insert the motor part into the coupling (10a) until it locks.
5. PILig in the appliance and insert the food to be processed into the filling tube.
6. Switch the appliance on to operate. Never reach into the filling tube when the appliance is switched on. Always use the pusher (10a) to feed in food.
7. After use unplug and press the release buttons (5) to detach the motor part.
8. Press the lid interlock (10d) and hold it. Turn the lid (10) counter-clockwise to unlatch it.
9. Lift the lid
10.  Take out the tool holder before removing the processed To remove the tool (15a,b), push it up at the one end that protrudes at the bottom side of the tool holder.

Cleaning (see p. 3/fig. C)

Clean the motor part (4) and the whisk gearbox (8a) with a damp cloth only. The lid (10) can be cleaned under running water, but do not immerse it in water, nor clean it in a dishwasher. All other parts can be cleaned in a dishwasher.

You may remove the anti-slip rings from the chopper bowls for extra thorough cleaning. When processing foods with a high pigment content (e.g. carrots), the plastic parts of the appliance may become discoloured. Wipe these parts with vegetable oil before cleaning them.

Accessories

(can be bought individually, not available in every country)

MQ 20:| 350 ml compact chopper to chop herbs, onions, garlic, chillies, nuts etc.
---|---
MQ 30:| 500 ml chopper to chop carrots, meat, onions, etc.
MQ 40:| 1000 ml chopper to chop, mix, blend and crush ice

Subject to change without notice.

Please do not dispose of the product in the household waste at the end of its useful life. The disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>