WALI Universal Soundbar Mount Owner’s Manual
- June 7, 2024
- WALI
Table of Contents
WALI Universal Soundbar Mount Owner's Manual
www.walielectric.com
[email protected]
1-844-SATTLER (18447288537)
WARNING
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. USE
- TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Supplied Parts List
Install With TV/Monitor
-
According to the distances of the TV & Soundbar mounting holes, select the appropriate mounting positions on the Bracket. Rotate or turn over the Bracket for the best mounting solutions.
-
Select the correct TV mounting bolts
Select M6x16 Bolt C or M8x20 Bolt D according to your TV, connect Bracket together with D8x16 Washer H into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver not included)
-
Select the correct Soundbar mounting bolts
Hand thread bolts into the mounting holes on the back of your Soundbar to determine what size of bolts will fit.
Install With TV Mount
- Assemble Soundbar with the Bracket and VESA brackets from your TV mount to TV. According to the distances of the TV & Soundbar mounting holes, select the appropriate mounting positions on the Bracket. Rotate or turn over the Bracket for the best mounting solutions. The Bracket should be mounted between the TV and the VESA brackets. (VESA bracket not included)
- Select the correct TV mounting bolts
- 2a. Select M6x16 Bolt C or M8x20 Bolt DD according to your TV, connect Bracket together with D8x16 Washer H , VESA Brackets and Spacer KK into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver & VESA bracket not included)
- 2b. Select M6x30 Bolt E or M8x30 Bolt Fj and spacers II or J according to your TV, connect Bracket together with D8x16 Washer H , VEiSA Brackets and Spacer K into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver & VESA bracket not included)
- 2a. Select M6x16 Bolt C or M8x20 Bolt DD according to your TV, connect Bracket together with D8x16 Washer H , VESA Brackets and Spacer KK into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver & VESA bracket not included)
- Select the correct Soundbar mounting bolts
Hand thread bolts into the mounting holes on the back of your Soundbar to determine what size of bolts will fit.
