ION Party Rocker User Guide

: June 7, 2024
: ION

Table of Contents

PARTY ROCKER
Quickstart Guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PARTY ROCKER

Quickstart Guide

Quickstart Guide

Support

For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit ionaudio.com/partyrocker
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit 7-51-1340-I-warranty [PDF] WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light.
Do not sit, stand, or apply pressure on the dome light.

BOX CONTENTS

PARTY ROCKER
Microphone with mic cable
Audio Cable with 1/8” (3.5mm) connectors
Power Cable (standard IEC)
Quickstart Guide
Safety Instructions & Warranty Information Booklet

Quick Setup / Connection Diagram

Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
For optimal performance, place Party Rocker in the center of the room so it is unobstructed by walls, furniture, etc.
Move Light Mode switch to OFF.
Turn down the Master Volume on the Party Rocker.
Turn on Party Rocker.
Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more details on this)
Adjust the volume on your music player and on Party Rocker as needed.
Adjust the Light Mode switch on Party Rocker as needed.
Turn off Party Rocker when not in use.

TOP PANEL REAR PANEL

Top Panel Rear Panel

Diagram and Parts Description

1. Microphone Input with Volume Control (1/4″): This mono input accepts a 1/4″ input such as a microphone, guitar, or other musical instrument.

3

2. Auxiliary input: This stereo 1/8” input can be used to connect a smartphone, MP3 player, or other audio source.
3. Bluetooth®: The Paired LED will be lit when a device is paired to PARTY ROCKER. This LED will not be lit when PARTY ROCKER is first powered on (unless it was previously paired with a device). Press the Disconnect button to disconnect a paired Bluetooth device.
4. Master Volume Control: This adjusts the speaker’s main mix volume, which includes Microphone Input, Auxiliary Input, and the audio of a paired Bluetooth device.
5. Power LED: Indicates whether PARTY ROCKER is on or off.
6. Light Mode: There are three modes to select from for how the strobe lights react to the music.
• Beat = the light reacts to the beat of the music.
• Party = dome light spins and changes color whether there is music playing or not.
• Off = the lights in the dome can spin and react to the music playing (depending on the Light Mode that is selected).
7. Dome: The dome light can spin and react to the music playing (depending on the Light Mode that is selected).
8. Power Cable Input (IEC): Insert the included power cable here to power the unit.
9. Power ON/OFF Switch: Turns PARTY ROCKER on or off.

*WARNING: Do not look directly into the dome light. Do not sit, stand, or apply pressure on the dome light.

Party Rocker

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to reduce the overall volume of PARTY ROCKER.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

Connecting with a Bluetooth Device

Turn on your Bluetooth device.
Power on PARTY ROCKER and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the LED is off.
If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break previous Bluetooth connections and reset the Bluetooth module.
Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.
Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.
Paired LED will light up solid when it is ‘paired’.
Note: If you experience trouble pairing or playing music, update your device’s OS.
To disconnect pairing, press the ‘Disconnect’ button on PARTY ROCKER.
To connect to another Bluetooth device, repeat steps 3-4.