tp-link USB 3.0 Hub User Guide
- June 7, 2024
- tp-link
Table of Contents
USB 3.0 Hub
Model No. UH700
User Guide
ATTENTION
- Keep the hub away from water, fire, humidity, or hot
- Do not heavily drop or impact the hub.
- Do not attempt to disassemble, modify or fix the hub by yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.
- Disconnect the hub from the computer before cleaning it. Do not use the liquid cleaning method.
- This hub can be powered only by CE-certified computers that comply with Limited Power Source (LPS).
- For best performance, the connected devices should not exceed a combined current of 4A.
- TP-Link will not be held responsible for any damage to disk or hard disk data caused by improper use.
COPYRIGHT & TRADEMARKS
- Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are registered trademarks of their respective holders.
- No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.
Copyright 0 2017 TP-Link Technologies Co., Ltd. All rights reserved. http://www.tp-link.com
FCC & CE
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- Thsdevcennaynotcauseharmfuinterference.
- This device must accept any interference received, including cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Technical Support
Tel: +86 755 2650 4400
E-mail: support@tp-link.com
Web: http://www.tp-link.com/support
Hardware Connection
Connect the devices as follows. The power LED will light up and the hub is ready to use.
Usage
Tips:
- The TP-Link USB 3.0 hub is plug-and-play and requires no driver for Windows. Mac OS X or Linux systems.
- The hub is automatically turned on every time you plug the power adapter into a power outlet.
- The hub can transfer data even when the power adapter Is unplugged. In this mode, the power button will not work as a power switch anymore.
- To prevent possible data loss or corruption, avoid unplugging or plugging the power adapter when transferring data or charging.
Using the Hub
Transferring Data
This hub provides your computer with 7 additional USB 3.0 ports for super-
speed USB 3.0 data transfer.
Usage Tips :
- The USB 3.0 ports are also compatible with USB 2.0 and USB 1.1 specifications.
- The USB 3.0 ports transfer data at a rate up to 5Gbps, but the actual rate is limited by the USB transfer rate of the connected
- The performance of 2.4GHz wireless devices (wireless keyboards, mouses, etc.) may be affected when they are working too close to USB 3.0 devices.
Charging
The three ports on the right also provide you with a maximum current of 1.5A to quickly charge all kinds of mobile devices such as Android, Apple, and Windows products.
Usage Tips: If your device’s current is less than 1.5A, the charging port can automatically adjust its current supplied to your device to avoid damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>