smartwares Wireless Security Camera Instruction Manual
- June 7, 2024
- smartwares
Table of Contents
Instruction Manual
Wireless security camera
CMS-30101
PARTS DESCRIPTION
Camera
| 1. Antenna | 3. Lens | 5. Microphone |
|---|---|---|
| 2. LED light | 4. Day/night sensor | 6. Speaker |
Frequency: 2.4GHz
Maximum transmission power: 17.63dBm
SETTING UP YOUR DEVICE
The monitor can pair up to 4 cameras.
-
Turn the camera on by connecting it to the mains supply.
-
Wait for 30 seconds.
-
You will now hear: “Start configuration mode”.
NOTE: if you don’t hear the voice, press the re-set button on the camera for 6 seconds until you hear “Restore factory setting”. -
On the monitor from the main menu: Select “Add Camera”.
-
Select “Add Camera”.
-
On the camera: If the above steps are done correctly, you will hear:
– “Wireless settings, please wait”
– “Wireless connection successful” -
On the monitor: Wait for the pairing to complete.
EXTENDED MANUAL
The extended manual is available at the following internet address: www.smartwares.eu and search for Wireless Security Camera Set Outdoor CMS-30100
DECLARATION OF CONFORMITY
Hereby, Smartwares Europe declares that the radio equipment type CMS-30101 is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: www.smartwares.eu/doc
Wireless technology: RF
Operating frequency: 2,4 GHz
Max. radio-frequency power: 19.67 dBm
For more detailed instruction, please visit:
service.smartwares.eu
SUSTOMER SERVICE
smartwares® Europe
Jules Verneweg 87
5015 BH Tilburg The Netherlands
service.smartwares.eu
UK: +44 (0) 345 230 1231
References
- Smartwares - Alles voor een veilig en een comfortabel huis!
- Smartwares - Alles voor een veilig en een comfortabel huis!
- Smartwares | Declaration of Conformity