JOHN LEWIS Crystal Droplet Easy Fit User Guide
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS Crystal Droplet Easy
Introduction
Thank you for purchasing this Crystal Droplet Easy Fit. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
This product is Class I and must be earthed. This fitting should be fitted in
accordance with IEE Regulations and the Buildin Regulations. If in any doubt,
or where required by law, consult a competent person who is registered with an
electrical self-certification scheme. Further information is available online
or from your Local Authority. To prevent electric shock,switch off at the
mains supply before installing or maintaining this fitting. Ensure
otherpersons cannot restore the electricity supply without your knowledge. If
you are in any doubt, please consult a qualified electrician. If replacing an
existing fitting, make a note of the connections. Always use the correct type
and power bulb. Never exceed the power stated. When changing a bulb, always
switch off at the mains and allow the old bulb to cool down before handling.
Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use.
Parts list
Product assembly
Ensure the electricity is switched off at the fuse board.
Step 1
Remove the light bulb from the lamp holder (allow the bulb to cool down before
handling). Remove shade ring from lamp holder. Step 2
Place top ring of the fitting over lamp holder, then secure fitting to lamp
holder by replacing shade ring. Ensure the shade ring is firmly screwed to
lamp holder.
Step 3
Attach the correct type and wattage bulb to the lamp holder (bulb not
included) Switch on the electricity supply at the fuse board.
Caring for your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish. Indoors use only.
Aftercare and Troubleshooting
Why is the light not working when switched on? Check your power supply is switched on Turn off light and check that the bulb is inserted correctly Check the bulb is still in working order. Replace bulbs from John Lewis or established brand of the same type and compatibility If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partner Technical Support on 03301 230106.
Specification
- Recommended bulb: BC energy efficient LED GLS bulb or BC eco halogen GLS bulb
- Max. power: 1x40W
- Bulb not included
- Voltage: 220 –240V, 50Hz
- IP rating: 20
- Weight: 1.1kg
5 year guarantee
At John Lewis & Partners we test every light to high quality standards so
we are able to offer you a 5 year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back scheme
have funded the development and upgrade of recycling facilities across the UK.
Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>