John Lewis Globe USB Table Lamp User Guide
- June 7, 2024
- John Lewis
Table of Contents
GLOBE USB TABLE LAMP
USER GUIDE
Introduction
Thank you for purchasing this Globe USB Table Lamp. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
This fitting should be fitted in accordance with IEE Regulations and the Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority.
To prevent electric shock switch off at the mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electricity supply without your knowledge.
If you are in any doubt, please consult a qualified electrician. It is the installer’s responsibility to ensure that the fixings and plugs used are suitable for the surface you are fixing your product on. Always use the correct type and wattage bulb. Never exceed the wattage stated. The flexible cable on this luminaire, if damaged, shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Caution! The bulb and surrounding parts can become hot during use.
Do not cover. Keep away from curtains, bedding etc. Always route mains cable so it does not present a hazard (entrapment, tripping etc.); Ensure that there are no twists or snags in the cable. Plug into the mains supply; switch on using the inline cord switch provided. If moving this lamp, always carry by holding the stand part (and not the glass.)
Parts list
Description
| Image|
Quantity
---|---|---
A Metal base| | 1
B Glass| | 1
Product assembly
Step 1
Carefully unpack the carton, making sure all parts are present before
assembly. Place lamp on a flat surface
Step 2
Attach the correct type and wattage bulb to the lamp holder (bulb not
included). The maximum power indicated must not be exceeded.
Step 3
Place shade onto the top of lampholder, and then secure tight.
Step 4
Switch on the electricity supply at the fuse board. Insert the plug into the
power supply and turn on the switch.
Caring for your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Indoors use only.
Aftercare and Troubleshooting
Why is the light not working when switched on?
Check your power supply is switched on Turn off light and check that the bulb
is inserted correctly Check the bulb is still in working order.
Replace bulbs from John Lewis or established brand of the same type and
compatibility
If you experience any unresolvable technical issues with the product, contact
your nearest John Lewis & Partners shop or John Lewis & Partner Technical
Support on 03301 230106.
Specification
Recommended bulb: G9 LED ONLY
Max. power: 1x3W
Bulb not included
Voltage: 220 240V, 50Hz
IP rating: 20
Weight: 1.3kg
USB
Input: 220-240V~50Hz, 10W, 0.23A
Output: 5V 2.1A USB still can work when power off
5-year guarantee
At John Lewis & Partners we test every light to high-quality standards so we are able to offer you a 5-year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made inChina
Please retain these instructions for future reference.
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>