Xiaomi Air Purifier 2S User Manual

: June 7, 2024
: Xiaomi

Xiaomi

Air Purifier 2S
User Manual

Warning

Do not use under the below circumstances, this may lead to electric shock, fire and other damage：
Unstable places where the unit is easy to topple and fall
High-temperature, humid or wet places such as the bathroom
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains

Product Overview

Display

The front screen displays instructions

Display

How to Install

How to Use

Properly place the air purifier
For optimum performance, maintain the recommended distance between air inlets and walls or other obstacles.

Power / Mode switch
Press the power button to turn the unit on; press again to switch mode; press and hold for 2 sec to turn the unit off.

Screen On / Off
Press screen on/off button on the back of the unit to turn on/off the screen.

Reset Wi-Fi

If your phone could not be connected to the air purifier, press both mode button and screen on/off button for 5 secs until you hear a beeping sound indicating that Wi-Fi has been reset.

Quick Setup

Reset Wi-Fi
Control your device and interact it with other smart home devices in Mi Home app.

Install Mi Home app
Scan the QR code or go to app store to download and install Mi Home app.
Add a device
Open Mi Home app, tap “+” on the upper right, and then follow prompts to add your device.

If your phone could not be connected to the air purifier, press both mode button and screen on/off button for 5 secs until you hear a beeping sound indicating that Wi-Fi has been reset.

Note: The version of Mi Home app might have been updated, please follow the instructions based on the current app version.

Filter status prompts

Filter installation prompts
No filter or the filter is not original.
Note: Please install the original filter
Filter life prompts
The remaining life percentage displays on the screen when the filter’s remaining life is more than 10%.
Note: Filter remaining 98%
Filter replacement prompts
The filter should be replaced every 3-6 months. When the purifier detects the filter life is less than 10%, the display will prompt you with a QR code and a filter remaining life alert.
Note: Filter remaining 2%
Note: refer to the “Filter Replacement” label on the back of the filter housing door for detailed instructions.

Note: the filter may produce odors when it absorbs excessive harmful gases. You’re recommended to store the filter in a place with good lighting and ventilation to improve the activated carbon and restore dust adsorption capacity. if the recommended lifespan is due, please replace the filter in time.

How to Maintain

WARNING: Make sure to turn off the air purifier and disconnect power before cleaning.

Clean the filter cartridge

To ensure optimum operation, use a vacuum cleaner or soft cloth to remove any dust clinging to air holes or housing walls.

Clean the filter cartridge

Clean the laser dust sensor

The switch of dust sensor’s back cover is at the top of the filter housing. Lift to open the back cover (see Figure A).

Use an air blow gun or hair dryer to clean the back cover grille and sensor (see Figure B).

Clean the laser dust sensor

Specifications

Regulatory compliance information

Europe — EU declaration of conformity

We Beijing Smartmi electronic technology limited, hereby, declares that this equipment is in compliance with the applicable directives and european norms, and amendments.

The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/en/service/support/declaration.html

Disposal and recycling information

Correct disposal of this product. This marking indicates that this product should not be disposal with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Safety Precaution

Carrying

Turn off the unit and disconnect power before moving

Installing

The unit will not turn on until the filter door is correctly installed
Maintain 20cm and more between air inlets and walls or other obstacles

Power cord

Do not forcibly pinch, bend or twist the power cord in case that it breaks off
Do not pull the power cord when disconnecting power
Use only supported power sockets
Follow these instructions to use the power cord and socket to avoid fire, electric shock or damage：
The power cord must only be connected to supported power sockets
It is strongly advised to use the provided power cord rather than other cords
Disconnect power before servicing or moving the unit
Do not use the provided power cord with other product

Using

Stop using immediately in the event of unusual sound, bad odor, excessive heat and abnormal fan spin
Do not insert your finger or any objects into any openings
Keep hair and bits of fabric away from the unit, so as not to get involved or block the air inlet and outlet
Do not sit on, lean on or tilt the unit
Ensure sufficient ventilation when using in conjunction with solid fuel appliances to avoid carbon monoxide poisoning

Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd.
(a Mi Ecosystem company)
Address:11-1102, Office Building Rainbow City, 68 Qinghe Middle Street, Haidian District, Beijing, China
For further information, please go to www.mi.com

Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz