ADVANTECH 32-Channel Isolated Digital Input Card User Manual
- June 7, 2024
- Advantech
Table of Contents
STARTUP MANUAL
PCI-1733
32-channel Isolated Digital Input Card
Packing List
Before installation, please make sure that you have received the following:
- PCI-1733 card
- Driver CD
- Quick Start User Manual
If anything is missing or damaged, contact your distributor or sales
representative immediately.
User Manual
For more detailed information on this product, please refer to the PCI-
1730_1733_1734 User Manual on the CD-ROM (PDF format).
CD:DocumentsHardware ManualsPCIPCI-1730
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference in which case the user is
required to correct the interference at his own expense.
CE
This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from Advantech. Please contact your
local supplier for ordering information.
Overview
The Advantech PCI-1733 is a 32-channel isolated digital input card for the PCI bus. For easy monitoring, each isolated digital input channel is equipped with one red LED, and each isolated digital output channel is equipped with one green LED to show its ON/OFF status. The PCI1733’s isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The PCI- 1733 provides specific functions for different user requirements.
Specifications
Isolated Digital Input
| Number of Channels | 32 (bi-directional) |
|---|---|
| Optical Isolation | 2,500 VDC |
| Opto-isolator response time | 100 ps |
| Over-voltage Protection | 70 VDC |
| Input Voltage | VIH (max.) |
| VIH (min.) | 5 VDC |
| VIL (max.) | 2 VDC |
| Input Current | 5 VDC |
| 12 VDC | 3.9 mA (typical) |
| 24 VDC | 8.2 mA (typical) |
| 30 VDC | 10 3 mA (typical) |
General
| I/O Connector Type | 37-pin D-Sub female |
|---|---|
| Dimensions | 175 mm x 100 mm ( 6.9″ x 3.9″ ) |
Power Consump-
tion
| Typical| +5 V @ 200 mA
+12 V @ 50 mA
Max.| +5 V @ 350 mA
Temperature| Operation| 0 – +60°C (32- 140°F )
(refer to IEC 68 -2 – 1 ,2)
Storage| -20 – +70°C (-4 -158°F)
Relative Humidity| 5 – 95% RH non-condensing (refer to IEC 60068-2-3)
Certification| CE/FCC
Notes
For more information on this and other Advantech products, please visit our
websites at: http://www.advantech.com
For technical support and service: http://www.advantech.com/support/
This startup manual is for PCI-1733. Part No: 2003173301
2nd Edition June 2015
1 Startup Manual
Software Installation
Hardware Installation
-
Turn off your computer and unplug the power cord and cables. TURN OFF your computer before installing or removing any components on the computer.
-
Remove the cover of your computer.
-
Remove the slot cover on the back panel of your computer.
-
Touch the metal surface of your computer to
neutralize any static electricity that may be on your body. -
Insert the PCI-1733 card into a PCI slot. Hold the card only by its edges and carefully align it with the slot. Insert the card firmly into place. Use of excessive force must be avoided, otherwise, the card might be damaged.
-
Fasten the bracket of the PCI card on the back panel rail of the computer with screws.
-
Connect appropriate accessories (37-pin cable, wiring terminals, etc. if necessary) to the PCI card.
-
Replace the cover of your computer chassis. Reconnect the cables you removed in step 2.
-
Plugin the power cord and turn on the computer.
Switch and Jumper Settings
The following figure shows card connector, jumper and switch locations .
Board ID Settings
| ID3 | ID2 | ID1 | IDO | Board ID |
|---|---|---|---|---|
| 1 | 1 | 1 | 1 | 0 |
| 1 | 1 | 1 | 0 | 1 |
| 1 | 1 | 0 | 1 | 2 |
| 1 | 1 | 0 | 0 | 3 |
| 1 | 0 | 1 | 1 | 4 |
| 1 | 0 | 1 | 0 | 5 |
| 1 | 0 | 0 | 1 | 6 |
| 1 | 0 | 0 | 0 | 7 |
| 0 | 1 | 1 | 1 | 8 |
| 0 | 1 | 1 | 0 | 9 |
| 0 | 1 | 0 | 1 | 10 |
| 0 | 1 | 0 | 0 | 11 |
| 0 | 0 | 1 | 1 | 12 |
| 0 | 0 | 1 | 0 | 13 |
| 0 | 0 | 0 | 1 | 14 |
| 0 | 0 | 0 | 0 | 15 |
**PIN Assignments
**
Connection
Isolated Digital Input
Each of the 16 isolated digital input channels accepts voltages from 5 to 30
V. Every eight input channels share one external common. (Channels 0 ~ 7 use
ECOM0. Channels8 ~ 15 use ECOM1.) The following figure shows how to connect an
external input.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>