CostaKaiser GC355 Full HD WiFi Projector User Manual
- June 13, 2024
- CostaKaiser
Table of Contents
CostaKaiser GC355 Full HD WiFi Projector
IMPORTANT SAFETY CONSIDERATIONS
Attention
- Thank you for purchasing this series of digital products
- Please read through this User’s manual for proper use of this product
- Please keep this manual together with the warranty card in a safe place for reference as needed after reading
- Please read this User’s manual to find things you need to know in use or in case of problems
Note:
- Do not open the enclosure to avoid electric shock.
- No components in the projector can be repaired by customers.
- Please entrust qualified professional maintenance personnel for repair.
Warning
- The identification warns users of the voltage without insulating, treatment in the projector, which may cause an electric shock surface magnetic field.
- Therefore, it is very dangerous to contact with any component inside the projector
- The identification reminds users to be very careful and cautious in the operation and maintenance.
- Therefore, carefully read the manual to avoid any failures
Instruction
The following safety instructions ensure a long service life of the projector and prevent fire or electric shock. Please make sure you carefully read the instructions and pay attention to all the following warnings
-
Do not install the projector in places without proper ventilation
-
Do not install the projector in hot and humid places
-
Do not install the projector in dusty or smokey places.
-
Do not block the ventilation holes (intake or exhaust)
-
Do not install the projector near the temperature and smoke detectors It may cause a sensor failure
-
Do not install the projector ,n areas where warm and cool air will blow directly onto the projector. Otherw,se it may cause projector failure due to moisture condensation or large temperature changes
Installation
- Please use the projector in a dark room for best results
- Please use the projector with caution to avoid dropping or shocking it, which may cause internal damage
- Does not support Dolby. Please turn off Dolby digital on your devices
- Not Recommended for PPT, Word, Excel or business presentations
- To connect the projector with a tablet or smartphone, you need to use a wireless HDMI adapter.
- For Android phones which support MHL, you need an MHL to HDMI cable; for iPhones & iPads, you need a Lighting to HDMI cable adapter.
Power Supply
- Use the power cord with caution to avoid unduly bending it.
- Damaged power cords may cause electric shock or fire
- Unplug the power cord from the outlet after using the projecto
Cleaning
- Use a wet cloth to clean the casing regularly. Neutral detergent may be used for serious stains. Do not use strong detergent or solvent such as alcohol or diluent
- Use an air brush or lens paper to clean the lens and be careful not to scratch or scrape
- Please clean the ventilation opening and the speaker regularly. The projector will overheat if blocked with dust causing failure
- Please clean the projector with a soft brush. Do not use rigid accessories, such as a crevice cleaning tool in order to avoid damage to the projector.
Notes on Fire and Electric Shock
- Please ensure adequate ventilation and that the air outlet is not blocked to avoid heat accumulation within the projector.
- Prevent falling objects from falling into the projector, such as paper clips and paper scraps.
- Do not attempt to retrieve any such object.
- Do not insert any metal object such as a metal wire or a screwdriver into the projector.
- Make sure to irnrnediately turn off the power and ask qualified professional maintenance personnel to remove any object that falls into the projector.
- Do not place any liquid on the projecto
Moving
Please use soft packaging materials and attach the lens cover to protect
the lens when moving the projector. Also, do not impose severe mechanical
vibration on the p「ojector.
High Temperature Warning
During and after use, the temperature near the outlet will rise. Therefore
touching it may cause burns. Do not look at the lens or it may cause severe
eye injury
Install Away from Walls
Please leave at least a 30cm gap from walls to maintain adequate ventilation
ensuring the projector’s performance and reliability
NAMES AND FUNCTIONS OF PROJECTOR COMPONENTS
Get To Know The Remote Control
How To Use The Projector
Install the Projector
Power On
-
Plug the power cord into an outlet
-
Take off the lens cover.
-
Press the power button to turn on the projector
Adjust the Focal Length
-
Adjust the projector’s keystone correction ring and the focusing ring to obtain a satisfactory image.
-
lt 1s recommended to adjust the keystone correction ring in case of keystone distortion in the image
-
When the screen image is blurred, it is recommended to adjust the focus ring to improve the picture definition
-
Please move forward or backward proportionally in case the ad」ustment is unable to obtain the satisfactory definition
Choose the Input Source
The input source can be switched in the following ways:
- The initial interface after booting 1s as shown
- Press the on the operation panel of the projector and choose the appropriate input source the menu (as shown in the figure on the right)
- Press the key on the remote control to select the appropriate input source
Input Source Selection Screen
Play A Video / Music / Photo / Text
-
First select on the operation panel or on the remote control.
-
To play a video file, first select “Movie” on the main screen, and then press the “OK” key on the operation panel.
-
The selected box widens and the surrounding white edges stand out.
-
The same operation for playing a music file, a photo file and a text file, is the same with the operation of playing a video file.
-
Press “<” and “>” on the operation panel to select the equipment for File storage. Press the “OK” key to enter the next step.
-
Press “<” and “»” on the operation panel to select the desired File (or folder to enter the subfolder). Press the “OK” key to play it.
Safe Shutdown
The projector can be shut down and stored safely by the following steps
-
Press the key on the operation panel or the remote control of the projector and shut down the projector according to system prompts.
-
Screw in the focusing ring to ensure the lens is fully stored inside the projector.
-
Place the dust proof cover on the lens, and store the device in a dry and cool place
Screen Mirroring (Method 1)
- Select “Screen Mirroring” as the input source for the projector
- The projector will enter Screen Mirroring mode automatically after turned on.
- If the projector does not enter Screen Mirroring mode automatically, but instead displays another “Input Source”, you can switch to “Screen Mirroring” mode with this button E] on the projector or remote control.
Connect the external device to the WiFi of Projector.
- After the Projector is turned on, the name of WiFi will be automatically sent: Mirroring-XXXXXX
- Turn on the “WIFI”option from your external device and find the WiFi name of Projector, turn on and enter it (Password: 12345678)
Find the “Wireless Screen Mirroring” option of the external device, click and search for the projector.
- Android phone or tablet
- Sliding down the menu and enter the shortcut interface to find “Wireless Projection” option,click and search for the name of proiector.
iPhone or iPad
Sliding down the menu and enter the shortcut interface to find “Screen
Mirroring” option, click and search for the name of Projector.
Macbook
Turn on the setting to find ” Airplay”, click and search for the name of
Projector.
Windows PC
- Only Windows 10 can be supported.
- Use the shortcut keys to enter the “project” option and select “Duplicate”,
- Click “Connected to a wireless display” to enter device search.
- Select Wireless Display Adapter: Mirroring-XXXXXX, click and connect it.
- The Wireless Screen Mirroring will be successful when the projector’ s screen display is the same as the device.
Screen Mirroring (Method 2)
- Step 1 / 2 is the same as Method 1.
- Connect the projector to the router WiFi via an external device
- Open any browser and enter 192.168.49.1 in the address to switch to the “WiFi AP” interface
- Click “WiFi AP” to enter “Scan” interface
- Click “Scan”, select the router WiFi you want to connect to, enter the password and connect.
- Wait for 10 seconds. When the WIFi symbol and wifi name are displayed in the upper right corner of the projector, the connection is successful.
- Connect the external device to the same router WiFi (At this time, the external device and the projector are connected under the same WiFi)
- The steps 3 / 4 /5 is the same as Method 1
Note:
- The projector has a memory and automatic connection function. When the projector is turned on again, the projector will automatically connect to the WiFi of the connected router.
- If something goes wrong, you can do a factory reset by long pressing (10 seconds) the OK button on the projector / remote control and try to connect again.
PROJECTION SETTINGS
HOW TO SET THE PROJECTOR
Get a better viewing experience by using the appropriate settings. The main content of the projection can be set by the following steps:
-
Picture, Sound, Time, Option, can be set. Press “<” and “>” on the operation panel to select the desired setting.
-
Options related to “picture” are set in this screen.
- Options related with “Sound” are set in the screen.
- Options related to “Time” are set in this screen.
- Options related to “Option” are set in this screen.
PROJECTION DISTANCE AND SIZE
FAQs
What is the CostaKaiser GC355 Full HD WiFi Projector?
The CostaKaiser GC355 is a Full HD WiFi projector designed for high-quality video and multimedia presentations.
What is the resolution of this projector?
The CostaKaiser GC355 features Full HD resolution, which is 1920x1080 pixels, providing sharp and clear images.
Can I connect this projector to my smartphone or tablet?
Yes, this projector has WiFi connectivity, allowing you to connect it to your smartphone or tablet for wireless streaming.
What is the brightness rating of the GC355 projector?
The projector typically has a brightness rating of 6500 Lumen, ensuring vibrant and visible images even in well-lit rooms.
Does it support 3D content?
No, the CostaKaiser GC355 does not support 3D content. It is designed for 2D multimedia presentations.
What is the lamp life of this projector?
The lamp in the GC355 projector typically has a lamp life of 70000 hours, ensuring long-lasting use.
Can I connect external devices like a DVD player or gaming console?
Yes, the projector comes with multiple input options, including HDMI, USB, and more, allowing you to connect various external devices.
Is it suitable for home theater use?
Yes, the CostaKaiser GC355 is suitable for creating a home theater experience with its Full HD resolution and audio output options.
What is the throw distance of this projector?
The throw distance may vary, so check the product specifications, but it is typically 30 Feet.
Does it come with a remote control?
Yes, it usually includes a remote control for convenient operation from a distance.
Can I mount this projector on the ceiling?
Yes, the GC355 projector is often compatible with ceiling mounts for flexible installation options.
Where can I find user manuals and customer support for this projector?
You can find user manuals and contact customer support through the official CostaKaiser website or authorized dealers.
Video – Product Introduction
Download This PDF Link:CostaKaiser GC355 Full HD WiFi Projector User Manual