GE 48843 Backlit Buttons Universal Remote Control User Manual

: September 7, 2024
: GE

Table of Contents

GE 48843 Backlit Buttons Universal Remote Control
Setup
Button Function
Direct Code Entry
Auto Code Search
Code Identification
Favorites
Master Volume Control
Troubleshooting
Reset to Factory Settings
FAQs
Video- GE 48843 Backlit Buttons Universal Remote Control
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GE 48843 Backlit Buttons Universal Remote Control

Setup

Your universal remote requires two (2) AA batteries (not included). Alkaline batteries are recommended.
Battery Installation

Press and slide battery cover downward to remove.
Insert the batteries making sure to match the (+) (-) polarity inside the compartment.
Slide battery cover back into place.
Note: If your remote is not operating properly, replace the batteries with new ones.

Battery Precautions

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Battery Saver
Your remote automatically turns off if the buttons are held down for more than 8 seconds. This saves battery life if your remote gets stuck in a place where the buttons remain depressed (e.g. between the sofa cushions).

Code Saver
You have up to 10 minutes to change the batteries in your remote without losing the codes you have programmed.

Button Function

Power – Turns devices ON/OFF
Backlight – Turns LED lights ON/OFF
Device buttons – Select the device to control
ABCD – Access additional features for DVRs, cable and satellite receivers
APP1-3 – Access top apps like Netflix®, Hulu® Amazon Prime®, and more
Fav – Program up to 10 favorite channels
Input – Selects video input
DVD/Blu-ray™ open/close – Open/close a player or List features on cable/satellite receivers
Setup – Used to program the remote
Home – Access streaming or Guide on cable and satellite receivers
Menu – Display on-screen menu
OK – Acesses menu for selected device
Up, down, left, right navigation
Exit – Exits the on-screen menu
Info (*) – Displays on-screen content information
Volume up/down
Mute – Mutes sound
Channel up/down
Previous channel – Returns to previously selected channel
Record, play, stop, rewind, fast forward, pause
Numbers – For direct channel selection
Dot (•) – For direct entry of digital channels, e.g., 4.1
Enter – Some devices require ENTER to be pressed after channel selection

Direct Code Entry

Direct code entry is recommended for quick and easy programming.

In the Code List (included with remote), circle the 4-digit codes for the type and brand of device you wish to control.
Press and hold down SETUP until the remote’s red light turns on.
Press and release the chosen device button (for example tv, cbl, dvd, aud.) The red light will blink once and remain on.
Enter the first 4-digit code circled in Step 1. The red light will turn off.
Point the remote at the device and test the buttons. If they don’t work as expected, repeat Steps 2-5 with the next circled code.
Repeat the process for each device you wish to control.

Programming Notes

Some codes may operate only a few device functions, so test other codes for more functionality.
Trouble finding a code? Program the remote using the auto code search method.
Keep your device codes for future reference.

Auto Code Search

Auto code search cycles through all codes in the remote to find one for your device.
Before you begin, read through the steps below to familiarize yourself with the Auto Code search process.

Manually turn on the device you wish to control. (Use direct code entry method for devices without ON/OFF capability.)
Press and hold down SETUP until the remote’s red light turns on.
Press and release the chosen device button (for example tv, cbl, dvd, aud.) The red light will blink once and remain on.
Point the remote at the device and press POWER. The red light will blink and then remain on after cycling through 10 codes.
Did the device turn off?
YES – Go to Step 5.
NO – Repeat Step 4 to test the next 10 codes.
Manually turn on the device.
Point the remote at the device and press VOL+.
The red light will blink once and remain on.
Did the device turn off?
YES – Press and release the same device button pressed in Step 3. Then go to Step 7.
NO – Repeat Step 6 until the device turns off. Wait 3 seconds between each VOL+ button press.
Use the remote to turn on the device. Test the remote’s buttons. If they don’t work as expected, repeat Steps 2-7.
Repeat the process for each device you wish to control.

Code Identification

Code identification lets you retrieve the 4-digit code used to program each of your device buttons.

Press and hold down SETUP until the red light turns on.
Press the device button for the code you seek.
Press ENTER.
Press #1 and count how many times the red light blinks. This is the first digit in your code. Portet tempering by pressing +2, 473 and #44
Press ENTER to exit this mode.

Combo Devices
Some combo devices (e.g. TV/VCR, DVD/VCR, etc.) require use of a separate mode button for each part of the combo device. For example, if you have a TV/DVD combo, you might need to set up a TV code under the TV button and a separate DVD code under the DVD button to control each component.

Favorites

Favorites function lets you program up to 10 channels for quick access.

Press and release the device button for the component that controls channel selection, such as TV or cable box.
Press and hold down SETUP until the remote’s red light turns on.
Press and release FAV. The red light will blink once and remain on.
Press and release the numerical button (0 – 9) that you will use for storing your favorite channel. The red indicator will blink once and remain on.
Enter the channel number you wish to program, for example channel 4, 21, 4.1, 52.2.
Press and release the FAV button, the red light will turn off. Your favorite channel is now saved.
Repeat this process for up to 10 of your favorite channels.

Using Favorites

Press and release FAV. The red light will turn on.
Press and release the programmed button for your favorite channel (0-9). The red light will blink twice and the remote will send the code for your preprogrammed channel.

Master Volume Control

Master volume control lets you select an audio device to control the volume no matter which the component you’re operating.

Enabling Master Volume Control

Press and hold SETUP until the red light remains on.
Press the device button for the audio component you wish to use.
Press the MUTE button.
Press VOL+. The red light will blink twice and turn off.

Disabling Master Volume Control

Press and hold SETUP until the red light remains on.
Press the device button programmed for master volume control.
Press the MUTE button.
Press VOL-. The red light will blink twice and turn off.

Troubleshooting

The remote does not operate your device

Make sure the batteries are fresh and installed correctly.
Aim the remote directly at your device and make sure there are no obstructions between the remote and the device.
Make sure you select the appropriate device on the remote you wish to control (TV for TV, CBL for cable box, etc.).
Try programming the remote with a different code. See Direct Code Entry section.
Remote may not be compatible with your device. The remote does not operate some features of
Sometimes a particular code might operate a few features but not all. Try programming the remote with a different code from the Code List. See Direct Code Entry section.
Remote may not be able to operate all features of your device or button names may be different than that of your original remotes.

Reset to Factory Settings

Press and hold SETUP until the red light stays on.
Press and release the MUTE button.
Press and release 0 (zero). The red light will olink twice.

47504/47505/47506/47507 v1
MADE IN CHINA
GE is a trademark of General Electric Company and is under license by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a limited 90-day warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM M-F, Central Time.

Thank you for your purchase!
Instructions made easy

Read the instructions or watch the easy-to-follow video.
Scan code or visit byjasco.com/47504i

Exclusive deals

For deals, to register your purchase and to tell us how we’re doing, simply scan the code or visitbyjasco.com/deals

Enhance your home entertainment experience at: byjasco.com/ce

Like our product?
Leave a review on your favorite retailer website or amazon.com
Having problems?
Let us know how we can help.

Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

FAQs

What is the model number of the universal remote control discussed?

The model number of the universal remote control is GE 48843.

How many devices can the GE 48843 remote control operate?

The GE 48843 remote control can operate up to four devices simultaneously.

What types of devices are compatible with the GE 48843 remote control?

The GE 48843 is compatible with a range of devices including TVs, Blu-ray/DVD players, cable/satellite receivers, soundbars, and streaming media players.

What is the battery requirement for the GE 48843 remote control?

The GE 48843 requires 2 AA batteries, which are not included in the package.

How is the GE 48843 remote control set up?

The GE 48843 features easy setup with automatic code search and direct code entry methods.

What color is the GE 48843 remote control?

The GE 48843 remote control is black.

What is the weight of the GE 48843 remote control?

The GE 48843 remote control weighs 3.2 ounces.

Are there any special features of the GE 48843 remote control?

The GE 48843 remote control features ergonomic design, backlit buttons, and dedicated buttons for common functions.

What is the product dimension of the GE 48843 remote control?

The GE 48843 remote control measures 9 x 2.5 x 0.01 inches.