Xiaomi Power Bank Pro User Manual
- June 7, 2024
- Xiaomi
Table of Contents
Xiaomi Power Bank Pro
Please read the user manual before using the product
Specifications
Model: PLM03ZM
Battery type: Li-polymer
Cell capacity: 10000mAh 3.85V (38.5Wh)
Operating temperature: OOC–45’C
Dimensions.: 128.5x75x12.6mm
Input: 5.0V=2.0A 9.0V=2.0A 12V=1.5A Output: 5.QVn,2.4A 9.QVn,2.0A 12Vn,1.5A
Charging time: approx. 3.5 hours (9V/2A or 1 ‘ZV/1.5A adapter, standard
cable),
approx. 5.5 hours (5V/2A adapter, standard cable)
Product Introduction
Thank you for choosing Mi Power Bank Pro. The product is a high-capacity portable charger that uses Li-polymer batteries and Tl chips for a safe. efficient, and compatible user experience
Product Features
Safety: Mi Power Bank Pro has multiple safeguard technologies. to provide
over-charge, over-discharge, high temperature, and s.hort circuit protection
in all working conditions.
Efficiency: Supports last charging and discharging at 5.0V:,:: 2.4A
9.0V:,::2.0A 12V:,::1.5A output.
Compatibility: The product has a built-in USB charging controller,
compatible with most smartphones, tablets, and devices. It supports mainstream
fast charging devices, and can boost to 9V/12V.
Quality: Li-polymer batteries and Tl chips.
Note: The Power check button is not a Power button. Mi Power Bank Pro detects charging and discharging automatically. The Power indicator turns off 2 minutes after discharging is completed.
Charging: Connect with Mi AC Adapter to charge Mi Power Bank Pro. The indicator shows charging conditions as follows:
About anti-counterfeit labels
Anti-counterfeit labels are placed on the outer packaging of every certified 1000mAh Mi Power Bank Pro. Please scratch the coating to see the verification code, and check if the product is genuine on this website: http://www.mi.com/verify
Notes:
- Please make sure to fully charge Mi Power Bank Pro on its first use.
- When charging a device with Mi Power Bank Pro, please check whether your device displays the battery charging icon to confirm that Mi Power Bank Pro is working properly.
- When charging Mi Power Bank Pro or charging a device with Mi Power Bank Pro, please be sure to use the right charging cable.
- When all indicator LEDs lights go out, Mi Power Bank Pro is in low power mode. Please recharge as soon as possible.
- Once your device is fully charged, please disconnect it from Mi Power Bank Pro to avoid further discharge.
- When the product enters protection mode (LEDs don’t light up after pressing the Power check button) due to output short circuit or other reasons, please charge Mi Power Bank Pro with an external charger to resume.
Warnings
- Mi Power Bank Pro contains Li-ion batteries. Do not open the casing to avoid battery damage or other dangers.
- Please do not dismantle, press, puncture and short circuit Mi Power Bank Pro, or expose the product to liquids, fire, or environments where temperature is higher than 00°C (140°F).
Small current discharge: when M1 Power Bank Pro 1s not charging, double press
the Power check button to enter Small current discharge mode to charge small
devices, such as Bluetooth headphones and smart bands.
The indicator LEDs will turn on one by one in succession, indicating that Mi
Power Bank Pro has entered Small current discharge mode.
To exit Small current discharge mode, press the Power check button once.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>