JOHN LEWIS Waterfall Crystal Floor Lamp User Guide
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS Waterfall Crystal Floor Lamp User Guide
Introduction
Thank you for purchasing this Waterfall crystal floor lamp.
Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Warnings
The fitting is class II.
This fitting should be fitted in accordance with IEE Regulations and the
Building Regulations. If in any doubt, or where required by law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or from your Local Authority.
To prevent electric shock switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity
supply without your knowledge.
If you are in any doubt, please consult a qualified electrician.
If replacing an existing fitting, make a note of the connections.
Always use the correct type and wattage bulb. Never exceed the wattage
stated.When changing a bulb, always switch off at the mains and allow the old
bulb to cool down before handling.
Dispose of used bulbs carefully.
The flexible cable on this luminaire, if damaged, shall only be replaced by
the manufacturer Or his service agent or a similar qualified person
It is the installer’s responsibility to ensure that the fixings and plugs used
are suitable for the surface you are fixing your product on.
CAUTION! The bulb and surrounding parts can become hot during use.
Parts list
Product assembly
Caring for your product
Indoor use only.
Non-Dimmable.
Replace bulbs from John Lewis or established brand of the same type and
compatibility.
Recommend the fitting should be cleaned with a soft dry cloth.
Aftercare and Troubleshooting
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partner Technical Support on 03301 230106.
Specification
- Recommended Bulb: ES halogen GLS bulb or ES LED GLS bulb
- Max wattage: 40W each bulb
- Max. power: 3x40W
- Voltage: 220 –240V, 50/60Hz
- IP rating: 20
- Weight: 12.4kg
5 year guarantee
At John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 year guarantee.
Recycling
This symbol indicates that this product should not be treated as l household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Please retain these instructions for future reference.
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>