tp-link Kasa Smart Wi-Fi Outdoor Plug KP400 User Guide
- June 7, 2024
- tp-link
Table of Contents
User Guide
Kasa Smart Wi-Fi Outdoor Plug
KP400
About This Guide
This guide provides a brief introduction to smart outdoor plug and the Kasa
app, as well as regulatory information.
Please note that features of this product may vary slightly depending on the
model and software version you have, and on your location, language, and
internet service provider. All images, parameters and descriptions documented
in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention
|
Description
---|---
Teal| Key information appears in teal, including management page text such as
menus, items, buttons and so on
Underline| Hyperlinks are in teal and underlined. You can click to redirect to
a website.
More Info
- Specifications can be found on the product page at https://www.tp-link.com.
- Our Technical Support and troubleshooting information can be found at https://www.tp-ink.com/support.
Introduction
Extend your smart home to the outdoors with the weather-resistant smart outdoor plug. Power on your patio lights, holiday decorations, and more from the convenience of your smartphone. Turn each outlet on/off individually, set schedules, even use simple voice commands with Alexa, Google Assistant, or Microsoft Cortana to control the devices connected to the plug.
- Double the Outlets – Access and use 2 outdoor devices from anywhere together or individually with one smart plug.
- Weather-resistant – IP64 rating ensures your outdoor plug is protected against entry of dust and splashes of water from any direction. Weather-resistant cover included.
When not in use, the sockets should be firmly capped with the included weather-resistant cover. - Control from Anywhere – Turn your outlets on/off or set schedules from anywhere using your Kasa Smart app.
- Voice Control – Use voice commands to power up your smart plug with Alexa, Google Assistant, or Microsoft Cortana.
- No Hub Required – This plug works with a secured 2.4GHz wireless network without the need for a separate hub.
- Set Schedules – Individually schedule each device connected to this plug to automatically switch on or off if you’re home or away.
Appearance
This smart outdoor plug has two individual smart outlets, each with a control button to turn on or off the plug-in device and a LED to show you the current status. The System LED changes color according to different status. See the explanation below:
Control Button x 2
Press a control button to turn on or off the corresponding outlet.
Press and hold any one of the control buttons for 5s to reset Wi-Fi
connection.
Press and hold any one of the control buttons for 10s to factory reset your
plug.
Set Up Your Smart Outdoor Plug
Follow the steps below to set up your plug via Kasa Smart app.
-
Download and install Kasa app
Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below.
http://www.tp-link.com/common/promos/app_kasa.html?ref=QRCode -
Log in or sign up with TP-Link ID
Open the app, and log in with your TP-Link ID.
If you don’t have an account, create one first.
-
Add Device
Tap the + button in the Kasa app, select Smart Outdoor Plug and then follow step-by-step app instructions to complete the setup.
Note: When not in use, the sockets should be firmly capped with the included weather-resistant cover.
Main Device Controls
After you successfully set up your plug, you will see the home page of the Kasa app. Here you can view the status of all devices that you’ve added to Kasa and manage them. There are 2 smart outlets of this plug and you can tap on a smart outlet to control and manage.
Home Page
Device Status
Configure Your Smart Outdoor Plug
On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Runtime and change the settings of your smart outlets.
Set Schedule
Tap to set a schedule for your smart outlet to simplify your daily routine by creating automatic On/Off action.
Set Timer
Tap to set the timer and your smart outlet will automatically turn on/off
after the time ends.
Preset Away Mode
Tap to preset the Away Mode and your smart outlet will be randomly turned
on/off during this time.
Check Runtime
Tap to view and track runtime statistics.
View Device Settings
Tap to view and change the settings of your device.
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.
**Discover Kasa
**
Use the Kasa app to pair your plug with Amazon Alexa, Google Home Assistant or
Microsoft Cortana and enjoy a full hands-free experience. IFTTT support makes
it easy to set interactions between a whole host of products.
Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and
Away / Amazon Alexa / Google Assistant / IFTTT for detailed instructions.
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
is a
registered trademark of TP-Link Technologies Co., Ltd. Other brands and
product names are trademarks or registered trademarks of their respective
holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-
Link Technologies Co., Ltd. All rights reserved.
FCC Compliance Information Statement
Product Name: Kasa Smart Wi-Fi Outdoor Plug
Model Number: KP400
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above
has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the
equipment is properly maintained and operated.
Issue Date: 2019-03-21
Safety Information
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- Operating Temperature: -20℃~50℃(-4℉~122℉)
- Operating Humidity: 10%~90%RH, Non-condensing
- Storage Humidity: 5%~90%RH, Non-condensing
- For outdoor usage, use this product with ground fault circuit interrupter (GFCI) outlet.
- Risk of electric shock. Do not open. No user serviceable parts inside.
- Refer servicing to qualified service personnel.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
WARNING
- Timer could turn-on unexpectedly without the user being present. To Reduce the Hazardous Condition – Unplug the appliance that is plugged into the receptacle(s) controlled by the timer before servicing.
- Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
- When plugged into grounded 3-prong outlet , always ensure that the housing is facing downward and is at least 2 feet off the ground . Use the plug’s mounting tag to hang from a screw to ensure correct orientation.
- DO NOT expose to heavy rain or immerse in water or any other liquid.
- DO NOT remove ground pin ( middle pin ) or use with 3-to 2-prong adapter.
- DO NOT use with devices that should not be operated unattended , such as power tools.
- DO NOT use in precision timing applications where inaccurate timing could be dangerous(sunlamps , Saunas , etc)
- Keep children away from smart plug and outlet
- No Serviceable parts inside . DO NOT open or tamper with unit.
- Do not discard the stopper, the plug should be covered when the socket is not in use.
- Remove smart plug from outlet before cleaning
- DO NOT clean with liquid
- DO NOT exceed the recommended electrical ratings
Explanation of the symbols on the product label
| Symbol | Explanation |
|---|---|
| AC voltage | |
| **RECYCLING |
** This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
References
- Link: Simple, secure one-click payments
- WiFi Networking Equipment for Home & Business | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support