AKASO Bone Conduction Headphone User Manual

: June 7, 2024
: AKASO

AKASO Bone Conduction Headphone User Manual

diagram

What is Bone conduction

Bone conduction technology delivers sound through your cheekbones, ensuring your ears remain completely open to ambient sounds for maximum situational awareness during long-term wear.

Package Contents

Bone Conduction Headphones, Noise-reducing Earplugs, User Manual, USB Charging(USB in Micro).

Wearing Method

As shown, hand the earphones behind your neck while the speaker is attached to the cheekbones in front of your ears, rather than on your ears.

Product Instruction

Multifunction Button

Play / pause music

| Click left or right button.
---|---
Switch song|

Press and hold the left/right button for 2 seconds to switch to the previous/next song.

Answer/end call

| Click left or right button.
Reject a call|

Press and hold the left/right button for 2 seconds.

Power on

| Press and hold the right button for 3 seconds.
Power off|

Press and hold the right button for 5 seconds.

Adjust volume

|

Double-click the right button to increase the volume by one, double-click the left button to reduce the volume by one.

LED Indicator

Steady red

| Charging
---|---
Red light off and blue light stays on|

Complete charging

Blue and red flash alternately

| Pairing mode
Slow blue flashing|

Connected/playing music

Flash Blue

| Received a call/call

Charge

Charge the headphones with the included micro-USB cable. The LED light will turn from red to blue when charging is complete.

Note:

Since the battery may lose power during storage ,it is recommended to charge the headset before using it for the first time.
The headset cannot be used during charging
Do not use for a long time, it is recommended to charge the headset before using.
The headset will automatically shut down if it is not connected to the device for more than5 minutes.
The input voltage is 5V-500mA.

First boot pairing

In the off state, press and hold the right button for 3 seconds, the headset will flash blue and red light ultimately, then the headset enters the automatic BT paring mode, the headset prompt music with a voice prompt “Power on”. Then open your smart device and find “G101”from the BT list. And click on the connection.

After confirming the connection, the headset voice prompt “Connected”.

Specifications

Brand model number

| G101
---|---
Physical dimension|

135mm x 93mm x 48 mm (reference)

Equipment weight

| 1.16oz
Appearance color|

IP55

Working frequency

| ISM Band (2.402-2.480Ghz)
Transimit power|

Class 2 (-6dbm-4dbm)

BT distance

| 33ft(10m)
BT antenna|

Built in

Physical button

| Two buttons (left and right)
BT version|

BT V5.0

Battery

| Rechargeable polymer lithium battery (200mAh)
Input voltage|

DC-5V 500mA

Charge time

| 2.5h
Standby time|

10 days

Continuous play

| Up to 6H
Warranty|

1 year

Other Functions

Restore factory settings

Press and hold the left and right buttons for 3 seconds, the red light will flash for 3 consecutive times, indicating that the factory settings are restored.

Disconnected and reconnect

The headset is disconnected from the smart phone, and there are two “beep” tones. At this time, press the key to reconnected. On the phone, accompanied by the “Connected” tone.

Low battery voltage

The red light is always on and accompanied by a “beep” tone.

Storage and Maintenance

Store your headphones in a cool, dry place. Operating temperature 0~45°C(32-113°F). Working in a cold/hot loop mirror or in a highly humid place can reduce battery life. After storing for a long time, please charge it before use.
This BT headset is water resistant, but not completely waterproof. It can’t be placed in water for a long time and cannot be used for diving. If there is water, wipe it off with a clean soft cloth.
Clean the headphones with a soft, dry cloth.
Do not touch any sharp objects to the headphones.
Do not place the headphones under a very high or low temperature ring mirror.

Common Problems and Their Solutions

Problem Description

| Cause of|

Problem Solving

---|---|---

Not booting

| Battery is exhausted|

Fully charge with the charger

Long press the power button for too short

|

Reboot the button

Not charging

| Charging plug is not plugged in| Reinsert the charging plug
Not booting| Misoperation caused the headset program to go wrong|

Change reset with the charger

Unable to search or pair failed

| The headset does not enter the pairing state| Put the headset into the pairing state
Mobile phone BT application error|

Turn off the phone and reboot

User Manual

Scan the following QR Code or enter to the website to download detailed user manual. g101 [PDF]

Contact Us

For any inquires, issue or comments concerning our products, please send E-mail to the address below, and we will respond as soon as possible.
E-mail: [email protected] Tel: 888-466-9222 (US) Mon-Fri 9am-5pm (EST) Brand web: www.akasotech.com