AKASO PSP05 Heated Neck Wrap for Neck Pain Relief User Manual
- June 5, 2024
- AKASO
Table of Contents
AKASO PSP05 Heated Neck Wrap for Neck Pain Relief
Cleaning and Preservation
Connect the USB connector to the power supply and press the power button to enter the working state. Before washing, please make sure the power bank and power supply are removed. Wash delicately. After washing, hang to dry in a room temperature area until the product is completely dry before using it or storing it in a storage box. When not in use, store it as follows:
- When storing the product, let the product cool down before folding.
- During storage, do not place items on the product to prevent creases.
- Frequently check the product for signs of wear or damage. If you detect any damage, or if the product has been misused, return it to the supplier to check it before using it again if it is still under warranty.
Warranty
For peace of mind, we offer a 6-month warranty on this product.
Safety Precautions
All pictures shown are for illustration purpose only and may differ from the
actual product. Before using this product, please read this user manual and
all safety instructions carefully and completely to ensure safe and proper
use.
The descriptions in this manual are based on the default settings of the
product. Please keep this user manual in a safe and handy place for future
reference.
- Unplug the USB power cable when not using this product.
- For your safety, please turn off the power before going to bed.
- Avoid using this product directly on the same area of skin for more than 15 minutes in the high temperature setting. If there is an abnormal smell, heat, change of color, or other abnormalities during usage or storage, switch off the power and stop using immediately.
- Avoid getting this product close to any fire sources, corrosive liquids, or extreme temperatures.
- When washing, make sure the power is off. After washing, the product must be completely dried before being used.
- Hand wash only, scrubbing gently. Rinse thoroughly after hand washing to avoid detergent residue. Do not hand wring. Hang to dry.
- If the product is being used for an extended duration, such as when falling asleep, please adjust to the low temperature setting.
- Do not use if wet.
- Do not insert pins.
Specifications
- Product Name: AKASO Heated Scarf
- Product Model: G001
- Rated Voltage: 5V
- Rated Power: 5W
- Recommended Power
- Bank Output: 5V/2.1A
Operation Instructions
This product uses a one-button operation.
-
Press and hold for 3 seconds to turn on the device. After turning on the device, it will enter the high heat setting. The red light will flash and the output power will reach 100% (The temperature is approx. 140°F/60℃). If no one intervenes for 5 minutes, it will automatically enter the white setting.
-
Press again to enter the medium heat setting. The white light will flash and the output power will reach 75% (The temperature is approx. 131°F/
55℃). -
Press again to enter the low heat setting. The blue light will flash and the output power will reach 60% (The temperature is approx. 113°F/45℃). Keep pressing to cycle through the high, medium, and low heat setting. In any of the above three modes, press and hold the control switch for 3 seconds to turn the product off. It will automatically power off after 45 minutes of continuous operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>