John Lewis LED Hexagonal Pendant Light User Manual
- June 7, 2024
- John Lewis
Table of Contents
User manual
LED Hexagonal
Pendant light
Thank you for purchasing this LED hexagonal pendant light. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product
Warnings!
This is a Class II product and must NOT be earthed.
For your safety, this product must be installed in accordance with local
Building Regulations. If in any doubt, or where required by the law, consult a
competent person who is registered with an electrical self-declaration scheme.
Further information is available online or from your Local Authority To
prevent electric shock switch off at mains supply before installing or
maintaining this fitting.
Ensure other persons cannot restore the electrical supply without your
knowledge This light fitting should be connected to a 5 amp fused circuit.
This product is suitable for installation on surfaces with normal flammability
e.g. wood, plasterboard, masonry. It is not suitable for use on highly
flammable surfaces (e.g. polystyrene, textiles).
Ensure the correct fixings are used for the installation surface.
For your safety, always switch off the supply before cleaning or adjusting.
This product is dimmable.
Parts list
Assembly
Refer to assembly drawings below.
Carefully unpack the carton, making sure all the parts are present before
assembly.
Step 1
Before removing the existing fitting, carefully note the position of each set
of wires.
Step 2
See Figure 1. The drop of this product can be reduced and secured by pushing
button (X) and pulling the cable through the cord grip (Y). This will be
easier to complete before attaching the product to the ceiling.
Step 3
Refer to Figure. 2 Remove the fixing bracket (A) from the ceiling cover by
removing the side screws.
Step
4
Refer to Figure 3. Attach the fixing bracket to the ceiling using the screws
provided. Ensure there is a joist at the point of fixing to support the weight
of the product. Take care to avoid damaging any concealed wiring and pipes.
Step 5
Having identified the household wiring from your existing light fitting,
connect to the connection block inside the product as shown. When completed,
ensure that there are no bare or loose strands of wire exposed.
Check that
You have correctly identified the house wires.
The connections are tight.
No loose strands have been left out of the connection block.
Step 6
Refer to Figure 4. Attach the product to the ceiling. This product has “L”
shaped fixing slots (C) to allow easy attachment to the fixing bracket, as
shown in Figure 2.
Locate the “L” slots around the small screws (B) on the fixing bracket (A).
Rotate the ceiling cover to attach the product to the bracket. Tighten the
screws to secure. Take care not to trap any wiring.
Step 7
Replace fuse or circuit breaker and switch on. Your light is now ready for
use.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.
Recommended bulb
1 x 41 Watt energy-efficient LED
This product contains a non-replaceable LED module. If the LEDs become damaged
then the whole product must be replaced.
When moving or cleaning, always switch off at the mains and allow the LEDs to
cool before handling.
Specifications
Max. power: 41W
Voltage: 220-240V~50Hz
IP rating: IP20
Weight: 1.50kg
2000 lumen output
Colour temperature: Warm white (3000K)
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate instore
take back, but as embers of the Distributor Trade Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it
to your nearest collection facility or for further details contact your local
council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition.
However, should any parts be damaged or missing please contact the Product
Helpline on (01202) 690945.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
06/03/2020
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>