BARS Leaks Liquid Radiator Sealant Instructions

June 7, 2024
BARS

BARS - Logo

PRODUCT TECHNICAL INFORMATION

WOOOD - Cover

Bar’s Liquid Radiator
Stop Leak w/Water Pump Lube
150 g.

  • Engine
  • Head Gaskets & Seals
  • Transmission
  • Power Steering
  • Cooling System

Bar’s Leaks Liquid

Your vehicle’s cooling system plays a critical role in its overall operation. Leaking seals and gaskets reduce the cooling system’s capacity and functionality thereby causing an engine to run hotter and increase the potential to do further damage. In addition, cavitation – or the formation of cavities in the coolant when going through the water pump – causes intense micro explosions which over time wi! damage the impellers of the water pump affecting the flow of coolant.

Description:

Bar’s Leaks Liquid is specially designed to seal minor leaks and drips in the cooling system, reduce or eliminate cavitation and lubricate cooling system components. Bars Leaks Liquid works on leaking plastic, aluminum, and metal radiators, heater cores, blocks, head gaskets, and freeze plugs. In addition, Rhizex particles will break up the low-pressure cavities caused by cavitation and reduce or eliminate these internal micro-explosions.

Directions:

Shake well and pour entire contents into radiator (not overflow tank) after engine cools. Replace radiator cap and drive or run engine at least 15 minutes. If leaks persist, use second application. Use one bottle for 4 cylinder engines and two bottles for 6 & 8 cylinder engines. For best results, use Bar’s Nuralor Bars 10 Minute Flas tr to clean cooling system for dirty radiators.
NOTE: Mechanical attention may be necessary if leaks continue after treatment.

Benefits:

  • Seals leaks in the entire cooling system
  • Helps keep the cooling system clean
  • Reduces or eliminates cavitation damage
  • Lubricates cooling system components

Warnings:
Always be careful when working near an engine or radiator. Be careful when removing the radiator cap.
DANGER: Opening cooling system while engine is hot or running may cause severe burns.
BARS Leaks Liquid Radiator Sealant - Overview 1

Physical Characteristics:

Physical state: Liquid
Color: Light Brown
Odor: Characteristic
pH: N/A
Vapor pressure: @20°C:Not Known
Vapor density (air = 1): >1
Solubility: Not Soluble
Freezing point: Not Known
Specific gravity: 0.85 g/mL
Flash point: >100°C
BARS Leaks Liquid Radiator Sealant - Overview 2

BARS Leaks Liquid Radiator Sealant - Overview 3

Bar’s Products International, Ltd.

Visit:www.barsgroup.com
CONTACT: Main@BarsGroup.com

IMPORTANT NOTE:
Information contained in this document is subject to change at any time without notice as a result of continuous product research and development. Small deviations which can occur during the normal manufacturing process of the product will not affect the quality of the product. Although this text is composed with great care, Bar’s Products International and Bar’s Products Europe B.V. accepts no liability for damages resulting from omissions and/or inaccuracies in the text. The reader is advised to choose the final product in consultation with the supplier.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals