nordlux 104573 Ethan 1 Spot Matt Black Ceiling Light Instruction Manual
- June 7, 2024
- nordlux
Table of Contents
nordlux 104573 Ethan 1 Spot Matt Black Ceiling Light
Product Information
Specifications:
- Class: II
- Isolation: Double
- Ground Connection: Not required
Product Usage Instructions
Installation:
Ensure the lamp is placed on a stable surface. As it is Class II and double
insulated, it does not need to be connected to the ground wire of the
installation.
Powering On:
Before plugging in the lamp, make sure the power outlet is compatible with
the lamp’s plug. Insert the plug firmly into the outlet to power on the lamp.
Adjusting Light Settings:
Use the designated controls on the lamp to adjust brightness or color settings
as per your preference. Refer to the user manual for specific instructions on
adjusting settings.
Cleaning and Maintenance:
Regularly dust the lamp with a soft, dry cloth to maintain its appearance.
Avoid using harsh chemicals or abrasive materials that may damage the lamp’s
surface.
FAQ (Frequently Asked Questions):
-
Q: Do I need to connect the lamp to the ground wire during installation?
A: No, the lamp is Class II and double insulated, so it does not require connection to the ground wire. -
Q: How do I adjust the brightness of the lamp?
A: Use the controls provided on the lamp to adjust the brightness settings. Refer to the user manual for detailed instructions.
DIMENSION
INSTALLATION
FEATURES
- IP20 : The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II : The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
Disposal
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over correct recycling you help to prevent these products from straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
INSTRUCTION
- The lamp is only suitable for connecting directly to the mains.
- The mounting instruction must not be discarded.
- Do not exceed the maximum wattage.
IMPORTANT!
Always shut off power to the circuit before starting installation work. In
some countries, electrical installation work may only be carried out by an
authorized electrical contractor. Contact your local electricity authority for
advice.
General maintenance
- Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
- Specifically for mouth-blown glass: Mouth-blown glass is formed manually.
- Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary.
- This is to be seen as a natural consequence of the manual process and is what gives Mouth-blown glass its character and organic look.
- Always clean mouth-blown glass cold.
nordlux®
www.nordlux.com
Norclus NS – Betre Harnegade 34 – DK- 9000 Aalborg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>