belkin HDMI Video Secure KVM Switch Instructions
- June 7, 2024
- belkin
Table of Contents
belkin HDMI Video Secure KVM Switch Instructions
Safety and Regulatory Statements
Safety Symbols
One or more of the following symbols may be included in your product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user to the presence
of uninsulated dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is in the ON
position.
Power Off: This symbol indicates the principal on/off switch is in the OFF
position.
Protective Grounding Terminal: This symbol indicates a terminal which must be connected to earth ground prior to making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage to equipment, please observe the following precautions.
- Do not disable the power grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the product by unplugging the power cord from either the electrical outlet or the product. The AC inlet is the main disconnect for removing power to this product. For products that have more than one AC inlet, to remove power completely, all AC line cords must be disconnected.
- This product has no serviceable parts inside the product enclosure. Do not open or remove product cover.
CAUTION : Some Belkin products contain a lithium battery. This battery is
not a field replaceable item, and replacement should not be attempted by a
user. If errors occur when using the product and the battery is suspected,
contact Belkin Technical Support.
WARNING: For Service Personnel Only – There is a risk of explosion if the
battery is replaced with an incorrect type. Dispose of used batteries
according to the manufacturer’s instructions.
This product is for use with other products that are Listed or Certified by a
Nationally Recognized Testing Laboratory (NRTL).
Niap Protection Profile
This product is certified to the NIAP Protection Profile PSS version 3.0 certification for peripheral sharing switch devices.
Installation Precautions
NOTE: In order to comply with the product’s Common Criteria evaluation and to
prevent unauthorized administrative access to the product, the default
administrator username and password must be changed prior to
first product use
.Do not connect this product to computing devices that:
- are TEMPEST computers
- include telecommunication equipment
- include frame grabber video cards
- include special audio processing cards
Security Vulnerability
If you are aware of a potential security vulnerability while installing this product, contact Technical Support immediately by:
- Calling Belkin Technical Support at 800-282-2355
- Referring to http://www.belkin.com/us/support
CAUTION: Anti-tamper Caution – This product is equipped with an always-
on, active anti-tampering system. Any attempt to open the product enclosure
will activate the anti-tamper triggers, rendering the unit
inoperable and voiding its warranty
WARNING: Unit Enclosure Warning – If the unit’s enclosure appears disrupted or
if all LEDs flash continuously, remove the product from service immediately
and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to verify that the RFD was not improperly used to override the current device policy by an unauthorized person.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>