TECHview 4 Door RFID Access Controller User Manual
- June 7, 2024
- TECHview
Table of Contents
TECHview 4 Door RFID Access Controller User Manual
FEATURES
In/out management – Check the in/out time of access Time & attendance – Check attendance status and maintain statistics Access control setting – Who/when/how access Anti-passback of door – Once entering, card needs to exit before entering again. Opening door by multi-card – Door can only be accessed by multiple cards present. Opening door by first card – Door
SPECIFICATIONS
| Entry: | 4 Door |
|---|---|
| User Capacity: | 20,000 |
| Event Log: | 100,000 (Saved Permanently) |
| Wiegand Interface: | 26-34 bit |
| Communication: | TCP/IP |
| Connection: | Electric Lock, Exit Button, External Alarm |
| Power Supply: | 12V, 3A |
| Standby Current: | 120mA |
| Dimensions | 201(L) x 125(W) x 32(H)mm |
BOX CONTENTS
- 1 x 4 Door RFID Access Controller
- 1 x Software CD
- 1 x Mounting Kit (4 x Self-Tapping Screws, 4 x Rubber Bungs)
TCP/IP Wiring Diagram
Wiring DiagramLAN
Wiring Diagram WAN
FIRE & ALARM EXPANSION BOARD (OPTIONAL)
Fire & alarm expansion board is an add-on module for the product. It allows the setting of Fire and Alarm signal output via the software.
Module Features :
- 4-way alarm output. You can set the function to which door or doors the controller will activate.
- . Connect the fire signal input, so when the fire signal is received the doors in the controlled area will open automatically, and a fire alarm record will be generated.
- Supports break-in alarm, long time unlocking alarm, forced entry alarm, invalid card alarm, fire & alarm lingage, etc.
- Set delay time of each output from between 0-600 seconds.
Writing Diagram
Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com