TECHview 7 LCD Wired Video Doorphone Infrared Night Vision LEDs User Manual

TECHview 7 LCD Wired Video Doorphone Infrared Night Vision LEDs User

Manual

PRODUCT DESCRIPTION

Find out who’s knocking before you open the door! The fantastic resolution from the camera and monitor puts the power at your fingertips, providing you with clear vision
to identify visitors. Even at night, the night vision LEDs will help provide a clear picture regardless of ambient light. The camera is mounted into a strong, weatherproof alloy metal housing, for protection against damage. The monitor is a sleek wall-mounted light touch button interface with a full colour  7″ screen. The system provides electronic door
strike and gate control, as well as full talk-back to the Door phone Camera. There is also a selection of 16 melodies to choose from when a visitor comes calling. Includes 20m of
cable between the indoor and Door phone Camera, but can be extended up to around 100m. Additional monitors (available separately} can be added to provide control from
multiple parts of the house.

FEATURES

• 2-Way Audio Intercom
• Electronic Door Strike & Gate Unlock
• 16 Selectable Melodies
• 3 Level Volume Adjustment
• Adjustable Brightness & Contrast

BOX CONTENTS

SAFETY INSTRUCTIONS

• Keep the LCD Monitor away from high temperature such as near an oven or under direct sunlight, and high humidity such as bathrooms and greenhouses.
• Do not install the LCD Monitor close to a television or position with strong jamming – the signals can suffer interference.
• Do not touch the unit with wet hands.
• Avoid throwing, dropping or hitting the units.
• Clean the camera or screen with a soft cloth. Do not use detergent, thinner, volatile or corrosive liquids.
• Do not expose the Doorphone Camera to direct sunlight.
• Use the product with no interference.

CAUTION

1. To prevent damage, the mains power adapter should be fastened on the wall according to instructions.
2. Power plug should be easily accessible.

SYSTEM INSTALLATION

A. LCD Monitor

1. Fasten the Monitor Mounting Bracket of the LCD Monitor on the wall with screws.
2. Connect the 4-core wire of the LCD Monitor and the power wire according to the wiring diagram. (Pay attention to the position of the cables which may affect the installation
   of the LCD Monitor). Hang the unit on the Monitor Mounting Bracket after finishing the connection and connect it to the power supply.
   

B. Doorphone Camera

1.  Camera Mounting Bracket
   1. Install the Doorphone Camera at a height of 1.4m-1.7m up from the ground and prevent exposure to direct sunlight.
   

2. Drill three holes in proper positions in the wall and fasten the Camera Mounting Bracket on the wall with screws. (Screw size: 4 x 40FA)
   

3. Connect the wires according to the wiring diagram.

4. Fix the Doorphone Camera into the Camera Mounting Bracket and fasten the bottom with screws. (Screw size: 2.6 x SBA)
   

5. Finally seal the screw holes with enclosed silicone caps.

C. Wiring Diagram

Connect the electric lock with LCD Monitor

WIRING REQUIREMENTS

1. Please use 20m cable to connect LCD Monitor with Doorphone Camera.
2. RVV4 x 0.5mm2 connecting wire can be chosen if you want to lengthen it to 15~50m.
3. RVV4 x 0.75mm2 connecting wire can be chosen if you want to lengthen it to 50~100m.
4. Use RVV2 x 1.0mm2 connecting wire for the electric-lock. Connect the wiring terminal
   1, 2, 3, 4 of LCD Monitor with the wiring terminals 1, 2, 3, 4 of Doorphone Camera respectively. The wiring terminals 5 and 6 of LCD Monitors are connected to electriclock
   through RVV2x1.0mm2 wire. The wiring terminals 7 and 8 of LCD Monitor are connected to gate lock through RVV2x1.0mm2 wire. Please refer to the wiring diagram during connection.

OPERATION INSTRUCTIONS

LCD Monitor

Doorphone Camera

1. Press Doorbell Button of Doorphone Camera to call. The LCD Monitor will ring and show the image of visitors. Press Answer Button to activate intercom with the visitor. Talking time is about 120 seconds.
2. Touch the Door Unlock Button of LCD Monitor to release the electric lock.
3. Touch the Gate Unlock ( ) button to release the outdoor gate.
4. Press Monitor Button ( ) to start monitoring outside. The monitoring time is about 40 seconds. Touch Answer Button ((zb) again to talk with the visitor and the talking time is about 120 seconds. When the conversation is over, touch Answer Button (C%) to end the intercom.
5. Turn the adjust knobs on the side of LCD Monitor to adjust the brightness, contrast and talking volume. Slide the Ringtone Volume switch (a 5 t to set the volume to High/Medium/Low.

TECHNICAL SPECIFICATIONS

LCD Monitor LCD: 7″ Touch Button Resolution: 800 x 480 Power: 12VDC, 1.1A Power Consumption: 580mA (Max) Dimensions: 215(W) x 152(H) x 20(D)mm (Excluding Bracket)

Doorphone Camera

Image Sensor: 1/4″ CMOS Resolution: 700TVL (976 x 582) Frame Rate: 25fps Lens: 3.6mm Lens Angle: 46° Infrared: 6 x IR LEDs Infrared Range: Up to 1m IP Rating: IP44 Dimensions: 127(H) x 47(W) x 33(D)mm (Excluding Bracket)

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>