MAXDORIA SXT-168 Electric Cleaning Brush Instruction Manual

: June 17, 2024
: MAXDORIA

Table of Contents

MAXDORIA SXT-168 Electric Cleaning Brush
FUNCTION INTRODUCTION OF SWITCH PANEL
PRODUCT’S CORE FUNCTIONS
PRODUCT STRUCTURE DESCRIPTION
HOW TO CHARGE
HOW TO USE
CLEANING AND MAINTENANCE
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAXDORIA SXT-168 Electric Cleaning Brush

Instruction manual

Product Name: MAXDORIA Electric Cleaning Brush

Thank you for your patronage!
Please read the manual carefully before use and keep it properly for future reference.
The manual contains information about various usage methods of this electric cleaning brush and some usage skills, so that you can use it more easily and make your home more refreshing and comfortable.

FUNCTION INTRODUCTION OF SWITCH PANEL

Power On/Off: Press and hold the power button for 3 seconds to turn on the machine and enter the rotating working mode. The working light number will light up and display the current battery level. When the machine is working, press the power button to enter the low speed state. This machine has 3 speed, including low speed, middle speed, and high speed. Press and hold the power button for 3 seconds to turn off.
When there is an issue with the operation, excessive load, or rotor blockage during use, the display screen will show “ff”, and the machine will shut down automatically after 5 seconds.

PRODUCT’S CORE FUNCTIONS

This product is mainly used for cleaning household bathrooms, kitchens, living room floors, furniture, cars, and other places. The product uses high- performance lithium batteries, strong power motors, 3 speeds, and can be freely adjustable according to different needs for cleaning intensity. The international standard Type-C charging wire is used for charging, and the circuit design has overcharge and discharge protection. The low battery warning, LED work indicator, and the charging light flashes when fully char ged to 1 00%. The product meets FCC standards and EU safety and environmental certification.

PRODUCT STRUCTURE DESCRIPTION

MAXDORIA-SXT-168-Electric-Cleaning-Brush-1

Sponge brush disc
Towed brush
Fiber brush
Imitation wool brush
Brush head holder
Dome brush
Tip brush
Small flat brush
Large flat brush
Type-C charging cable
Telescopic handle
Connector
Main unit
Charging indicator light
Control panel
Power On/Of
Sealing plug for charging port

WARNING

Please carefully check if the accessories are complete before use.
Do not place the charger in a damp environment.
Be sure to check if the charging hole is sealed when cleaning.
After cleaning, wipe the surface dry in a timely manner to ensure that the product is dry.
This product should not be used by individuals (including children) who are not sound, have sensory or mental impairments, or lack relevant experience and knowledge, unless there is supervision or guidance from personnel responsible for their safety when using these products.
Children should be taken care of to ensure that they do not play with these products.
Do not use hot water when cleaning products. When using warm water, be sure to check if the water temperature is too high first to prevent hands from getting burned.
When using, do not touch the rotating parts with your hands or clothes.
When replacing the brush head, do not use tools such as a screwdriver to pry the brush head, just use your hand to forcefully pull it out.
When replacing the brush head, do not touch the switch with your hands to avoid accidental startup and injury.
When using, please stay away from easily entangled parts such as wires and ropes.

HOW TO CHARGE

When the product’s battery level is low, the control panel number will display a flashing status of 1 word.
Open the sealing plug of the charging hole and use the dedicated charger of this product to insert the charging head into the charging hole. The indicator light on the display screen is red and the display screen is in the CH state.
The normal charging time of this product is about 4 hours.
When the status indicator light is green, it indicates that the battery is sufficient. Pull out the charging plug and unplug the charger from the power socket, and install the charging hole sealing ring (Figure 3).

Warning: When using a charger, be sure to use the original charging cable in conjunction with a USB charger of DV 5V1 A , and check if the charger is damp or watery. Unless otherwise specified, do not plug in and use this product.

FUNCTION INTRODUCTION OF BRUSH HEAD

Sharp brush head: suitable for corners, crevices, car wheels, and areas that are not easily accessible during cleaning in household kitchens, bathrooms, or range hoods (Figure 4).
Small flat brush head: suitable for cleaning small flat areas such as hand basins, kitchen sinks, furniture, etc.(Figure 5).
Large flat brush head: suitable for cleaning oil and dirt in places such as bathrooms, kitchens, living rooms, windows, glass, etc. (Figure 6).
Dome brush: Suitable for cleaning bathtub/toilet/sink (Figure 7).
Attention: When using the figure 8-11 brush disc , it is necessary to first stick the brush disc to the brush disc holder, and then install the brush disc holder on the host machine to use it.
Imitation wool brush disc, can be used for polishing, waxing, dust removal etc. on the surface of high-end homes, appliances, cars.
Fiber brush discs are mainly used for the removal of heavy oil stains and surface polishing of surfaces such as kitchens, range hoods, walls, bathrooms.

HOW TO USE

Please charge for at least 2 hours before use to ensure that the machine has sufficient power.
Select the appropriate brush head according to its use and place the brush head on the machine.
Long press the power button for 3 seconds, press once to rotate the machine at low speed, press twice to rotate at medium speed, and press three times to rotate at high speed (Figure 12).
When the machine is working, the indicator on the switch panel indicates the current battery level, with a maximum battery level of 1 00 and a minimum battery level of 01 .
The switch button function is 1-2-3-1-2-3, and to shut down, you need to press and hold for 3 seconds.
When replacing the brush head, please tum off the machine first and keep your hands away from the switch buttons when replacing.
Hold the brush head ln your hand and pull It vertlcally outward. While pulling the brush head, gently swing it left and right to make It easier to remove It (Figure 13).
When installing the brush head, align the semicircular groove of the brush head with the convex groove of the connecting head and press it vertically. When you hear a “click” sound, it will be installed in place (Figure 14).
When using a brush disc or mop, first stick the brush disc to the brush disc holder, and then install the brush disc holder onto the machine according to the Installation method of the brush head (Figure 15).

CLEANING AND MAINTENANCE

Please check whether the charging is sealed when cleaning.
Do not use metal objects such as steel wires, abrasive cleaners or corrosive liquids (such as gasoline or acetone) to clean the brush head and body surface.
You can wash the brush head of the product under the faucet or turn the product to high-grade, and automatically clean the brush headin the water.
After the cleaning is completed, the water on the product needs to be vigorously dried and wiped with a dry cloth.
Do not use hot water above 60° to clean the brush head and products.

ENVIRONMENT PROTECTION

When disposing of the product, please do not stack it with general domestic garbage; It shall be delivered to the recycling center. designated by the manufacturer. This is conducive to environmental protection.
The built-in rechargeable battery contains substances that may pollute the environment. When discarding the product, be sure to take out the battery and properly dispose of the battery.

WARRANTY

The warranty period for the electric cleaning brush is 12 months, starting from the date of purchasing. During this period, we will refund or replace the defective product.