NESTERA Wheelset_V1.0 Plastic Chicken Coop Fixing Kit Installation Guide
- May 15, 2024
- NESTERA
Table of Contents
NESTERA Wheelset_V1.0 Plastic Chicken Coop Fixing Kit
Wheelset Fixing kit
-
Wheels Qty 2
-
Linch pin Qty 2
-
Large washer Qty 4
-
Large spacer Qty 2
-
Axle Qty 1
How to fit your wheelset
-
Slide on to the axle 1 x large washer followed by the large spacer then the next washer, Push the wheel on to the axel and attach the linchpin in the hole provided.
You only need to lift the ring slightly up from the bar. Linch Pins are designed to spring closed, so watch your fingers!
-
Push the axle with one wheel attached through your coop from the nest box side until it goes through the other side of the coop.
-
Attach the other wheel to the axle as in step 1, You may need someone to hold the other side of the axle so you can fit the other fixings with ease.
Your coop is now ready to be wheeled around at your leisure.
Chicken coop in wheels down position ready to attach your chicken run if purchased.
Chicken coop wheels in raised position ready to be moved around your garden.