Pyle PLPTS25 Portable Adjustable Laptop Stand User Manual
- June 9, 2024
- Pyle
Table of Contents
Pyle PLPTS25 Portable Adjustable Laptop Stand
PREPARATION
Remove the following parts from the box and identify all the parts:
ASSEMBLING INSTRUCTIONS
- Start by removing the end caps from the two stabilizer rods.
- Assemble the left/right support brackets. Take one side of the upper supports and match it with the corresponding side lower support (the lower supports feature an anti-slip grip pad on the bottom) – Figure A.
Align the mounting holes at the desired height and position the
Screw Knobs through the supports (ensure not to over-tighten). -Figure B.
NOTE: The Stabilizer Bars MUST be positioned at least 2 holes apart.
- Repeat steps 1 & 2 above to assemble the other side of the stand’s support bracket aligning the correct heights of the stabilizer rods.
FAQs
What are the dimensions of this stand?****
The dimensions of the stand are as follows:
Width: 12.5″
Height: 2.5″
Depth: 14″
Does this stand work with a laptop that is in a case?****
Yes, as long as the laptop is not in a case that is larger than the actual laptop. If it is, you will need to remove the case before using this stand.
How much does this stand weigh?****
This stand weighs about 3 pounds.
Does a laptop stand improve performance?****
This can result in a reduced lifespan for your laptop and decreased performance. In order to keep your device cool, reduce the chance of damage, and prolong its lifespan, you should raise the height of your device. This will improve the airflow underneath the device.
What is important for a laptop stand?****
Your body can relax more fully by sitting in a more comfortable position if your laptop is raised for improved viewing angles. You might slouch while reading text or typing on the keyboard if you don’t have a laptop stand.
Do laptop stands help keep laptop cool?****
A smart approach to keep your laptop cool is using a laptop stand. They assist you by preventing the laptop from making direct touch with any surfaces, allowing it to maintain its ideal temperature. Additionally, it stops it from overheating and being harmed.
What is the best angle for a laptop stand?****
The top of the screen should ideally be between eye level and 30 degrees below it, according to ergonomics experts. Even if you become bogged down in your work, this can help you correct your posture and lessen neck and backaches.
Does laptop stand improve airflow?****
In order to maximise air contact and hence aid prevent heat accumulation, laptops therefore require as much surface area as possible. This is why your laptop’s temperature will quickly increase when you put it on a flat surface, like your lap. By elevating the laptop above the surface of the desk, laptop stands let you increase airflow to the device.
Are laptop stands comfortable?****
The most fundamental benefit of having a laptop stand is that it will make your workspace more ergonomic, which will help with posture, relieve back and neck pain, and prevent future stress-related problems. Your screen will be raised to eye level by the laptop stand, relieving stress on your neck and back.
Is laptop stand necessary for laptop?****
When you use a laptop on a flat surface, heat builds up. Your laptop’s performance may suffer as a result, and its lifespan may be shorter than usual. Raising the height of your gadget improves the airflow below it, keeping it cooler and extending its lifespan by lowering the danger of damage.
Video
Download PDF Link; Pyle Portable Adjustable Laptop Stand pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>