JBL Tune 120TWS Manual: Quick Start Guide & Technical Specs
- June 8, 2024
- JBL
Table of Contents
The JBL Tune 120 TWS Earbuds User Manual is a comprehensive guide designed to help users get the most out of their JBL Tune 120TWS earbuds. The manual includes a Quick Start Guide that provides step-by-step instructions on how to wear the earbuds, power them on and off, connect them to a device, and pair them. It also includes technical specifications such as driver size, frequency response, sensitivity, and maximum SPL. The manual also provides information on charging time, LED behaviors, and button commands. Additionally, the manual contains important information about IC RF exposure requirements and how to maintain compliance with these requirements. The JBL Tune 120 TWS Earbuds User Manual is an essential resource for anyone who wants to use their earbuds to their full potential. If you have any questions about the manual, you can post them in the comments section.
Quick Start Guide
UNE120TWS
WHAT’S IN THE BOX
How to Wear
First Time Use
Power on & Connect
Pairing
Power OFF
Power on & connect to device
CONNECTING
Power ON / OFF
BUTTON COMMAND
Charging Time
LED Behaviors
TECH SPECIFICATIONS
Driver Size: 5.8 mm Dynamic Driver
Frequency Response: 20 Hz – 20 kHz
Sensitivity: 96 dBSPL@1 kHz 1 mW
Maximum SPL: 96 dB
Microphone Sensitivity: – 38 dBV/Pa @1 kHz
Impedance: 14 ohm
Bluetooth transmitted power: <12 dbm
Bluetooth transmitted modulation: GFSK, /4 DQPSK, 8DPSK
Bluetooth frequency: 2.402 GHz – 2.480 GHz
Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP V1.6
Bluetooth version: 4.2
HEADSET BATTERY TYPE: LITHIUM-ION BATTERY (85 MAH/3.7 V DC)
Charging case battery TYPE: LITHIUM-ION BATTERY (850 MAH/3.7 V DC)
Power Supply: 5 V 1.0 A
Charging time (headset & charging case): <2 hrs from empty
Music playtime with BT on: UP TO 4 hrs
Weight: 73 g
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLT120TWS) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.049 W / kg. The device was tested for
typical bodily operations where the product was kept 5 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user’s head and the back of
the headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. Use of accessories that do not meet these
requirements may not comply with IC RF exposure requirements and should be
avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLT120TWS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
JBL-Tune-120-TWS-Earbuds-User-ManualDownload
Questions about your Manual ? Post in the comments!
FAQS
How should I use the earbuds to comply with RF exposure requirements?
Maintain a minimum separation distance of 0 cm between your ear and the earbud antenna, and use only the supplied or approved antenna. Avoid using accessories that do not meet separation distance and metal parts requirements.
What is the IC RF exposure information and statement?
The statement provides information on SAR limits, device testing, separation distance requirements, and the use of accessories to maintain compliance with IC RF exposure requirements.
What are the technical specifications of the JBL Tune 120TWS earbuds?
The specifications include driver size, frequency response, sensitivity, maximum SPL, microphone sensitivity, impedance, Bluetooth transmitted power and modulation, Bluetooth frequency and profile version, headset and charging case battery type, power supply, charging time, and weight.
What are the LED behaviors of the earbuds?
The LED indicators will flash different colors to indicate various statuses such as power on/off, pairing mode, and low battery.
How long does it take to charge the earbuds and charging case?
Charging time is less than 2 hours for both the earbuds and charging case.
How do I power off the earbuds?
Place the earbuds back into the charging case to power them off.
How do I pair the earbuds with my device?
The earbuds will automatically enter pairing mode when they are first powered on. If they do not enter pairing mode, press and hold the button on both earbuds until the LED indicators start flashing.
How do I power on and connect the earbuds?
To power on, remove the earbuds from the charging case. To connect, enable Bluetooth on your device and select “JBL Tune 120TWS” from the list of available devices.
How do I wear the JBL Tune 120TWS earbuds?
Insert the earbuds into your ears and adjust them until they fit comfortably and securely.
What comes in the box with the JBL Tune 120TWS earbuds?
The box includes the earbuds, a charging case, a USB charging cable, and ear tips in three different sizes.