PHILIPS Air Purifier User Manual
- June 7, 2024
- Philips
Table of Contents
Air Purifier
© 2018 Koninklijke Philips N.V. All rights reserved.
4241 211 03401
AC3257
User Manual
1
A B
G
C
DE
F
2
H
I
J
K
L
M
N
3
4
5
6
23
24
25
26
7
8
9
10
27
28
29
30
11
12
13
14
3s
31
32
33
34
15
16
17
18
3s
3s
35
36
37
38
3s
3s
3s
3s
19
20
21
22
39
3s
Contents
1 Important
2
Safety
2
2 Your air purifier
5
Product overview (fig. a)
5
Controls overview (fig. b)
5
3 Getting started
6
Installing filters
6
4 Using the appliance
7
Understanding the air
quality light
7
Turning on and off
7
Changing the fan speed
7
Setting the timer
8
Setting the child lock
8
Using the light on/off function 8
5 Cleaning
9
Cleaning schedule
9
Cleaning the body of the
appliance
9
Cleaning the air quality sensor 9
Cleaning the pre-filter
10
6 Replacing the filter
10
Understanding the healthy
air protect lock
10
Replacing the filter
10
Filter force reset
11
Filter type change
11
7 Troubleshooting
12
8 Guarantee and service 14 Order parts or accessories 14
9 Notices
14
Electromagnetic fields (EMF) 14
Recycling
15
EN 1
1 Important
Safety
Read this user manual carefully before you use the appliance, and save it for
future reference.
Danger · Do not let water or any
other liquid or flammable detergent enter the appliance to avoid electric
shock and/or a fire hazard. · Do not clean the appliance with water, any other
liquid, or a (flammable) detergent to avoid electric shock and/ or a fire
hazard. · Do not spray any flammable materials such as insecticides or
fragrance around the appliance.
Warning · Check if the voltage
indicated on the appliance corresponds to the local power voltage before you
connect the appliance.
· If the power cord is damaged, you must have it replaced by Philips, a
service center authorized by Philips, or similarly qualified persons in order
to avoid a hazard.
· Do not use the appliance if the plug, the power cord, or the appliance
itself is damaged.
· This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Child shall not play with the appliance. Cleaning and maintenance
shall not be made by children without supervision.
· Do not block the air inlet and outlet, e.g. by placing items on the air
outlet or in front of the air inlet.
2 EN
· Make sure that foreign objects do not fall into the appliance through the
air outlet.
Caution
· This appliance is not a substitute for proper ventilation, regular vacuum
cleaning, or use of an extractor hood or fan while cooking.
· If the power socket used to power the appliance has poor connections, the
plug of the appliance becomes hot. Make sure that you plug the appliance into
a properly connected power socket.
· Always place and use the appliance on a dry, stable, level, and horizontal
surface.
· Leave at least 20cm free space behind and on both sides of the appliance and
leave at least 30cm free space above the appliance.
· Do not place anything on top of the appliance.
· Do not sit or stand on the appliance. Sitting or standing on the appliance
may lead to potential injuiry.
· Do not place the appliance directly below an air conditioner to prevent
condensation from dripping onto the appliance.
· Make sure all filters are properly installed before you switch on the
appliance.
· Only use the original Philips filters specially intended for this appliance.
Do not use any other filters.
· Combustion of the filter may cause inreversible human hazard and/or
jeopardize other lives . Do not use the filter as fuel or for similar purpose.
· Avoid knocking against the appliance (the air inlet and outlet in
particular) with hard objects.
· Always lift or move the appliance by the handle on top of the appliance.
EN 3
· Do not insert your fingers or objects into the air outlet or the air inlet
to prevent physical injury or malfunctioning of the appliance.
· Do not use this appliance when you have used indoor smoke-type insect
repellents or in places with oily residues, burning incense, or chemical
fumes.
· Do not use the appliance near gas appliances, heating devices or fireplaces.
· Always unplug the appliance after use and before cleaning or carrying out
other maintenance.
· Do not use the appliance in a room with major temperature changes, as this
may cause condensation inside the appliance.
· To prevent interference, place the appliance at least 2 meters away from
electrical appliances that use airborne radio waves such as TVs, radios, and
radio-controlled clocks.
· The appliance is only intended for household use under normal operating
conditions.
· Do not use the appliance in wet surroundings or in surroundings with high
ambient temperatures, such as the bathroom, toilet, or kitchen.
· The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot
be used as a safety device in case of accidents with combustion processes and
hazardous chemicals.
· If you need to move the appliance, disconnect the appliance from the power
supply first.
· Do not move the appliance by pulling its power cord.
4 EN
2 Your air purifier
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register your product
at www.philips.com/welcome.
Product overview (fig. a)
A Control panel
B Air quality light
C Air quality sensors
D
NanoProtect filter HEPA Series 3 * (FY3433)
E
NanoProtect filter Active Carbon* (FY3432)
F Pre-filter
G Front panel
- Hereinafter referred to as air purification filter
Controls overview (fig. b)
H On/Off button I Child lock button J Light on/off button K Display screen L
Fan speed button M Timer button N Reset button
EN 5
3 Getting started
Installing filters
The appliance comes with all filters fitted inside. Remove the packaging of
the filters before you can use the appliance. Remove all filters, unpack them,
and place them back into the appliance described as follows.
Note
· Make sure that the side with the tag is pointing towards you.
1 Pull the bottom part of the front
panel to remove it from the appliance (fig. c).
2 Press the two clips down and pull the pre-filter towards you (fig. d).
3 Remove all filters (fig. e). 4 Remove all packaging materials of
the air purification filters (fig. f).
5 Put the unpacked air purification
filters back into the appliance (fig. g).
Note
· Put the thick filter in the appliance first, and then the thinner filter.
6 Put the pre-filter back into the appliance (fig. h).
Note
· Make sure that the side with the two clips is pointing towards you, and that
all hooks of the pre-filter are properly attached to the purifier.
7 To reattach the front panel, mount
the panel onto the top of the appliance first (1). Then, gently push the panel
against the body of the appliance (2) (fig. i).
6 EN
4 Using the appliance
Understanding the air quality light
PM2.5 level 35 36-75 76-115 >115
Air quality Air quality light color level
Blue
Good
Blue-Purple Fair
Purple-Red Poor
Red
Very poor
The air quality light automatically goes on when the appliance is switched on, and lights up all colors ien sequence. In a short time the air quality sensors select the color that corresponds to the ambient air quality.
Turning on and off
1 Put the plug of the appliance in the
power socket.
2 Touch to switch on the appliance (fig. j). » The appliance operates under
the Auto-purification mode by default.
» After measuring the air quality for a short time, the air quality sensor
automatically selects the color of the air quality light.
» After measuring the particle matters in the air, the appliance shows the
PM2.5 level on the screen (fig. k).
3 Touch and hold for 3 seconds to
switch off the appliance.
Note
· After the appliance is switched off by the on/off button , if the plug is
still in the power socket, the appliance will operate under the previous
settings when it is switched on again.
Changing the fan speed
There are several fan speeds available. You can choose the Auto-purification
mode, allergen mode, speed 1, 2, 3, 4 or 5.
Auto-purification mode
In Auto-purification mode, the appliance selects the fan speed according to
the ambient air quality. · Touch the fan speed button to
select the Auto-purification mode (A) (fig. l).
Allergen mode
The specially designed allergen mode can effectively remove common allergens
such as pollen, pet dander and dust mite etc. · Touch the fan speed button to
select the allergen mode (AL) (fig. m).
Sleep mode
In sleep mode, the appliance operates quietly under speed 1. One minute after
the sleep mode is selected, the power and light on/off indicators are dimmed,
and all the other lights are off. · Touch the fan speed button to
select the sleep mode (speed 1) (fig. n).
EN 7
Manual
· Touch the fan speed button repeatedly to select the fan speed you need (fig.
o).
Setting the timer
With the timer, you can let the appliance operate for a set number of hours.
When the set time has elapsed, the appliance will automatically switch off.
· Touch the timer button repeatedly to choose the number of hours you want the
appliance to operate (fig. p). » The timer is available from 1 to 24 hours.
To deactivate the timer, touch the timer button repeatedly until displays on
the screen.
Setting the child lock
1 Touch and hold the child lock
button for 3 seconds to activate child lock (fig. q). » “L” displays on the
screen for
3 seconds. » When the child lock is on,
all the other buttons are not responsive.
2 Touch and hold the child lock
button for 3 seconds again to deactivate child lock (fig. r). » “UL” displays
on the screen for
3 seconds.
Using the light on/off
function
With the light on/off button, you can switch on or off the air quality light,
the display screen and the function indicators if needed.
1 Touch the light on/off button
once, the air quality light will go out.
2 Touch the light on/off button
again, the display screen and the function indicators will go out. The power
on/off and light on/off indicators will still be on, but the lights will be
dimmed.
3 Touch the light on/off button for
the third time, all lights will be on again.
8 EN
5 Cleaning
Note
· Always unplug the appliance before cleaning.
· Never immerse the appliance in water or any other liquid.
· Never use abrasive, aggressive, or flammable cleaning agents such as bleach
or alcohol to clean any part of the appliance.
· Only the pre-filter is washable. The air purification filter is not washable
nor vacuum cleanable.
Cleaning schedule
Frequency
When necessary
When F0 displays on the screen Every two months
Cleaning method Wipe the surface of the appliance with a soft dry cloth
Clean the prefilter
Clean the air quality sensors
Cleaning the body of the appliance
Regularly clean the inside and outside of the appliance to prevent dust from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air outlet with a soft dry
cloth.
Cleaning the air quality sensor
Clean the air quality sensor every 2 months for optimal functioning of the
purifier. Clean them more frequently if you use the purifier in a dusty
environment.
Note
· When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the air quality
light may indicate that the air quality is bad even though it is good. In this
case you have to clean the air quality sensor or use one of the manual speed
settings.
1 Clean the air quality sensor inlet and outlet with a soft brush (fig. s).
2 Remove the air quality sensor cover (fig. t).
3 Clean the air quality sensor, the
dust inlet and the dust outlet with a lightly moistened cotton swab (fig. u).
4 Dry them with a dry cotton swab. 5 Reattach the air quality sensor
cover (fig. v).
EN 9
Cleaning the pre-filter
Filter alert light status
F0 displays on the screen (fig. w)
Follow this
Clean the prefilter
1 Pull the bottom part of the front
panel to remove it from the appliance (fig. x).
2 Press the two clips down and pull the pre-filter towards you (fig. y).
3 Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use a soft brush to brush away the dust
(fig. z).
4 Air dry the pre-filter.
Note
· Make sure that the pre-filter is completely dry. If it is still wet,
bacteria may multiply in it and shorten the lifetime of the pre-filter.
5 Put the pre-filter back into the appliance (fig. {).
Note
· Make sure that the side with the two clips is pointing towards you, and that
all hooks of the pre-filter are properly attached to the purifier.
6 To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the appliance (2) (fig. |).
7 Touch and hold the reset button
for 3 seconds to reset the pre-filter cleaning time (fig. }).
6 Replacing the filter
Understanding the healthy air protect lock
This appliance is equipped with the healthy air protect lock to make sure that
the air purification filters are in optimal condition when the appliance is
operating. When the filters are almost expired, the filter code displays on
the screen to indicate that you need to replace the filters. If the filters
are not replaced in 14 days, the appliance will stop operating and get locked.
Replacing the filter
Note
· The air purification filters are not washable nor vacuum cleanable.
Filter alert light status
A3 displays on the screen (fig. ~)
C7 displays on the screen
A3 and C7 display on the screen alternately
Follow this
Replace NanoProtect filter HEPA Series 3
Replace the NanoProtect filter AC
Replace both filters
10 EN
1 Take out the expired air purification
filter according to the filter code displayed on the screen, and gently put
the expired filter into the trash bin (fig. ).
Note
· Do not touch the pleated filter surface, or smell the filter as it has
collected pollutants from the air.
2 Remove all packaging material of the new filter (fig. f).
3 Place the new filter into the appliance (fig. g).
4 Touch and hold the reset button
for 3 seconds to reset the filter lifetime counter (fig. ).
Note
· Cleanse your hands after changing the filter.
Filter force reset
1 Touch and simultaneously
for 3 seconds to enter the filter force
reset mode (fig. ).
» Code (A3) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2 Touch and hold
for 3 seconds to
force reset the filter lifetime of the
NanoProtect filter HEPA Series 3
(fig. ).
3 Code (C7) of the Nanoprotect filter
AC displays on the screen after the
lifetime of the NanoProtect filter
HEPA Series 3 filter HEPA has been
reset (fig. ,).
4 Touch and hold for 3 seconds to
force reset the filter lifetime of the
NanoProtect filter AC and exit the
filter force reset mode (fig. ).
Filter type change
1 Touch and simultaneously
for 3 seconds to enter the filter type change mode (fig. ). » Code (A3) of the
NanoProtect
filter HEPA Series 3 displays on the screen.
2 Touch to select the filter code of the new filter you will use (fig. ,,).
3 Touch and hold for 3 seconds
to confirm the filter code of the new filter (fig. …).
Note
· After you have selected the filter code of the new filter using the button,
if you do not touch any other buttons in 10 seconds, the appliance will
automatically confirm the filter code of the new filter.
4 Code (C7) of the Nanoprotect filter
AC displays on the screen after the first filter type has been changed (fig.
,).
5 Touch to select the new filter code of the second filter (fig. ).
6 Touch and hold for 3 seconds to
confirm the filter code of the second filter and exit the filter type change
mode (fig. ).
Note
· After you have selected the filter code of the new filter using the button,
if you do not touch any other buttons in 10 seconds, the appliance will
automatically confirm the filter code of the new filter.
EN 11
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.
Problem
Possible solution
The appliance does not work even though it is plugged in..
The filter replacement code has been displaying on the screen but you have not replaced the corresponding filter yet. The appliance will be locked if you keep using the expired filter. In this case, replace the filter and reset the filter lifetime counter.
The appliance does not work even though it is switched on.
· The appliance is working but the buttons are not responsive. Check if the
child lock is on.
· The filter replacement code has been on continuously but you have not
replaced the corresponding filter, and the appliance is now locked. In this
case, replace the filter and reset the filter lifetime counter.
The airflow that comes out of the air outlet is significantly weaker than before.
· The pre-filter is dirty. Clean the pre-filter (see chapter “Cleaning”).
· The air quality does not improve, even though the appliance has been operating for · a long time.
One of the filters has not been placed in the appliance. Make sure that all filters are properly installed in the following order, starting with the innermost filter: 1) NanoProtect filter HEPA Series 3; 2) NanoProtect filter AC; 3) pre-filter. The air quality sensor is wet. The humidity level in your room is high and causes condensation. Make sure that the air quality sensor is clean and dry (see chapter “Cleaning”).
The color of the air quality light always stays the same.
The air quality sensor is dirty. Clean the air quality sensor (see chapter “Cleaning”).
12 EN
Problem
Possible solution
The appliance produces a strange smell.
The first few times you use the appliance, it may produce a plastic smell. This is normal. However, if the appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. The appliance may also produce an unpleasant smell when the filter is dirty. In this case, clean or replace the filter concerned.
The appliance is extra loud.
If the appliance is too loud, you can change the fan speed to a lower fan speed level. When using the appliance in a bedroom at night, choose the sleep mode.
The appliance still indicates that I need to replace a filter, but I already did.
Perhaps you did not reset the filter lifetime counter. Plug in the appliance, touch to switch on the appliance, and touch and hold the reset button for 3 seconds.
Error code “Er” displays on the screeen.
The hall sensor is not working properly. Remove and then reattach the front panel. If the error code “Er” still exists, contact the Consumer Care Center in your country.
Error codes “E1”, “E2”, “E3” or “E4” displays on the screeen.
The appliance has malfunctions. Contact the Consumer Care Center in your country.
EN 13
8 Guarantee and service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Consumer Care Center in your
country (you find its phone number in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in your country, go to your local Philips
dealer.
Order parts or accessories
If you have to replace a part or want to purchase an additional part, go to
your Philips dealer or visit www.philips.com/support. If you have problems
obtaining the parts, please contact the Philips Consumer Care Center in your
country (you can find its phone number in the worldwide guarantee leaflet).
9 Notices
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Compliance with EMF
Koninklijke Philips N.V. manufactures and sells many products targeted at
consumers, which, like any electronic apparatus, in general have the ability
to emit and receive electromagnetic signals. One of Philips’ leading Business
Principles is to take all necessary health and safety measures for our
products, to comply with all applicable legal requirements and to stay well
within the EMF standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no
adverse health effects. Philips confirms that if its products are handled
properly for their intended use, they are safe to use according to scientific
evidence available today. Philips plays an active role in the development of
international EMF and safety standards, enabling Philips to anticipate further
developments in standardization for early integration in its products.
14 EN
Recycling
Do not throw away the product with the normal household waste at the end of
its life, but hand it in at an official collection point for recycling. By
doing this, you help to preserve the environment. Follow your country’s rules
for the separate collection of electrical and electronic products. Correct
disposal helps prevent negative consequences for the environment and human
health.
EN 15
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>