Siren 6 – SmartThings configuring sound and volume Print

This page provides step by step instructions to setting the sound and volume of Siren 6 and 2 separate examples of using it in SmartThings Connect using the standard device handler by SmartThings and form part of the larger Siren 6 user guide.

Follow these steps to configuring your Siren 6 output sound when used with SmartThings Home Monitor, these steps assume that your Siren 6 is already paired to your SmartThings home network:

Steps

1. Open SmartThings Connect app

2. Find your Siren 6 Widget in the list of devices.

3. Tap on the Siren 6 widget to open up the Siren 6 page.

4. Tap on More Options (3 dot icon – located top right corner)

5. Tap on Settings in the popup screen

6. You should now be on the sound/volume control screen (known as preference/setting page), this will give you 3 settings to configure, and an option to send your set configuration.

   • Endpoint – this determines what 8 available sounds that you could configure.
   1. Browse – also the main/parent sound control of Siren 6
   2. Tamper – known as sound 2 in the list of controllable devices, this controls the sound/volume played when the vibration sensor or tamper sensor is triggered (when you move the Siren 6 too often).
   3. Button one – determines the sound/volume of button one when pressed, or when Sound 3 is controlled from SmartThings.
   4. Button two – determines the sound/volume of button two when pressed, or when Sound 4 is controlled from SmartThings.
   5. Button three – determines the sound/volume of button three when pressed, or when Sound 5 is controlled from SmartThings.
   6. Environment – determines the sound/volume when Siren 6 receives a environment type z-wave alarm command. (ie. smoke sensors, CO2 sensors, etc)
   7. Security – determines the sound/volume when Siren 6 receives a security type z-wave alarm (ie. motion sensors, door sensors, etc)
   8. Emergency – determines the sound/volume when Siren 6 receives a emergency type z-wave alarm.
   • Volume set in % – this determines the volume level of your sound
   • Sound # – this determines which of the 30 sounds are played, you can refer #1-30 to the sound previews found on this page here: https://aeotec.freshdesk.com/support/solutions/articles/6000223793-siren-6-sound-previews-

7. First input Endpoin t, for SmartThings Home Monitor, we want this to be set to 1.

8. Second input Volume set in % , decide what you want here, but for an alarm, I would recommend inputting 100.

9. Third input Sound # , refer to the sound preview page and decide which sound # you want.

10. When you are done, click on the toggle switch on step 4 which will push your configuration you’ve done between steps 7-9.

11. You can test if the sound changed by playing the “ Main ” sound by clicking on “ Siren and Strobe ” under it.

For this example, this will cover how to configure Button one to play “Ding Dong Tubular” which is sound #2 with volume level 70. To break this down for individual settings:

• Endpoint = 3
• Volume set in % = 70
• Sound # = 2

Steps

1. Open SmartThings Connect app

2. Find your Siren 6 Widget in the list of devices.

3. Tap on the Siren 6 widget to open up the Siren 6 page.

4. Tap on More Options (3 dot icon – located top right corner)

5. Tap on Settings in the popup screen

6. You should now be on the sound/volume control screen (known as preference/setting page), this will give you 3 settings to configure, and an option to send your set configuration.

   • Endpoint = 3
   • Volume set in % = 70
   • Sound # = 2

7. Click on the toggle switch next to “4. Send sound and volume configuration” which will push this configuration to Siren 6.

8. Press Aeotec Button linked to Siren 6 which should play the newly configured sound.

For this example, this will cover how to configure Button one to play “Ding Dong Tubular” which is sound #2 with volume level 70. To break this down for individual settings:

• Endpoint = 2
• Volume set in % = 0
• Sound # = any number between 1 – 30 (it doesn’t matter)

Steps

1. Open SmartThings Connect app

2. Find your Siren 6 Widget in the list of devices.

3. Tap on the Siren 6 widget to open up the Siren 6 page.

4. Tap on More Options (3 dot icon – located top right corner)

5. Tap on Settings in the popup screen

6. You should now be on the sound/volume control screen (known as preference/setting page), this will give you 3 settings to configure, and an option to send your set configuration.

   • Endpoint = 2
   • Volume set in % = 0
   • Sound # = 15

7. Click on the toggle switch next to “4. Send sound and volume configuration” which will push this configuration to Siren 6.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>