ProMounts OAJS-2001 Jump Starter Instruction Manual

ProMounts OAJS-2001 Jump Starter

Specifications

• Battery Capacity: 74.0Wh
• Peak Current: 2000A
• Dimensions: 22710159 mm
• Type-C Input: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
• Output USB-C: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
• Output USB1: 5V/3A; 9V/2A; 12V/1.5A
• Output USB2: 5V/2.4A
• Output DC: 12V/10A Max

Product Usage Instructions

Charging the Jump Starter

1. Before first use, charge the jump starter to 100%.
2. Recharge the jump starter every 3 months to prevent battery damage.
3. Use the provided Type-C input for charging.

Jump Starting a Vehicle

1. Insert the jumper cables into the jump starter and connect the clamps to the car battery (Red to positive, Black to negative).
2. Press the power button, then press the START button.
3. Observe the screen display for the “READY” indication before starting the car engine.
4. If the car battery voltage is low, press and hold the Engine Force the Start Button for 3 seconds to force start the car.

Safety Precautions

• Do not connect the red and black clamps to avoid short circuits.
• Avoid disassembling the jump starter.
• Keep the product away from children and store it in a dry place.
• Avoid extreme temperatures during use.

Frequently Asked Questions (FAQ)

Q: Can I jump-start a vehicle more than 3 times continuously?

• A: It is not recommended to jump-start the car engine more than 3 times continuously as it may cause overheating and damage to the product.
• Please wait 60 seconds between each jump to prevent overheating.

Q: How should I store the jump starter?

• A: Store the jump starter in a dry place, away from corrosive materials and damp conditions.
• Keep it out of reach of children as it is not a toy.

Q: What should I do if the jump starter expands, leaks, or smells during use?

• A: If you notice any expansion, leakage, or unusual smell from the jump starter during use, stop using it immediately and shut it down for safety reasons.
• Before using the product, please read this instruction manual carefully and keep it for future reference.
• Note: There may be small differences between the images shown here and the product itself.

WARNING

1. This product was designed for 12V lead acid/AGM/Gel batteries/vehicles only.
2. DO NOT connect the red and black clamps.
   • It will short-circuit the jump starter
3. Do not disassemble the jump starter
4. Keep away from children. It is not a child’s toy
5. Store in a dry place. Do not store in damp conditions and keep away from corrosive materials.
6. If the jump starter expands, leaks, or smells during use, stop and shut down immediately
7. Please use the jump starter in a normal environment. Do not use in freezing or burning temperatures.
8. DO NOT jump start the car engine more than 3 times continuously as it may overheat and damage the product. Please wait 60 seconds between each jump to prevent overheating.
9. DO NOT jump start if the battery is 10% or lower.
   • It will damage the battery.
10. Recharge the jump starter every 3 months to prevent the battery from being damaged
11. Before the first use, charge to 100%
12. After starting the car, please wait at least 30 minutes before charging the jump starter
13. Be sure to use the standard jumper cables that come with the product.

Parameters

• Battery Capacity: 74.0Wh
• Peak Current: 2000A
• Dimensions: 22710159 mm
• Type-C Input: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
• Output USB-C: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A
• Output USB1: 5V/3A; 9V/2A; 12V/1.5A
• Output USB2: 5V/2.4A
• Output DC: 12V/10A Max

Product structure diagram

1. LED Light
2. Power Button
3. Engine “START” Button
4. LED Light Button
5. Engine Force Start Button
6. Screen Display
7. Jump Start Port
8. USB1 Output
9. USB2 Output
10. Type-C Input/ Output Port (IN/ OUT)
11. DC 12V/10A Output

Screen display instructions

Product Accessories

How to charge a mobile phone or digital products?

1. Step 1: Plug in any compatible USB to USB1, USB2, or Type-C
2. Step 2: Plug in the phone or other device
3. Step 3:  Press the power button to start charging

How can LED emergency lights be turned on?

Long press for 3 seconds in any mode to turn off the LED lamp function.

How to recharge the product?

• First step: Insert the charging cable.
• Second step: Connect the charging cable to a USB port to recharge the product (AC Adapter is not included).

How to start a vehicle when the battery is flat?

• When starting the car, please make sure the product has more than 80% charge.
• Insert the jumper cables into the jump starter and connect the clamps to the car battery.
• (Red to positive/ Black to negative)
• Press the power button, then press the START button
• The screen will blink a green “READY”

FORCE START

• Once solid green, start the car engine
• If your car battery is in low voltage (below 2V), press and hold the button for 3 seconds (the screen will display “READY” in green) to force start your car.
• Do NOT short circuit, it will be dangerous!

Jumper Clamp Indicator Instruction

Trouble Shooting

| PROBLEM| REASON| SOLUTION
---|---|---|---
1| Nothing happens when pressing the power button.| The charge is low and needs recharging|  Plug the wall charger into the unit to recharge it.
2| H8″ displays on the screen| High-temperature protection, stop working at this time| Automatically recover when the temperature drops
3| “H0” displays on the screen| Low-temperature protection, stop working at this time| Automatically recover when the temperature increases

PRECAUTIONS

1. The jumper cable needs to be connected to the jump starter first and then connected to the car battery for ignition to avoid misjudgment.
2. Do not jump start the car at high frequency continuously.
3. This jumper cable is not allowed to be heated or used near fire.
4. This jumper cable is not allowed to be put into water or disassembled or modified without authorization.
5. Please connect the jumper cable correctly according to the requirements of the manual.
6. Make sure to connect the jumper cables to the correct terminals. DO NOT start the car with the incorrect claim to the annocito terminals.

FAQ

Q: How to turn off the device?

• A: The device will automatically shut down after 30 seconds of idle use. (no charge happening)

Q: What is the lifespan of Jump Starter?

• A: 500 cycles or full charges. (It can still be used after 500 cycles, but the capacity remains at about 80%.)

Q: How long can Jump Starter hold a charge?

• A : Due to the characteristics of high-rate battery activity and the internal self-consumption of the battery, the product must be charged once for a maximum of three months.

TOXIC AND HARMFUL SUBSTANCES:

Caution

1. Please follow the local traffic safety rules and regulations when using this product on the road
2. Do not dismantle this battery pack as it may cause an electric shock or fire hazard.
3. Keep away from children.
4. Do not touch the product with wet hands.
5. Do not scrape the product with sharp objects or contaminate the ports with dust. Regularly clean the ports.
6. Stop using it right away if a bad odor or abnormal noise is detected.
7. Do not leave the product or your vehicle unattended when the product is being used.
8. Make sure your engine is turned off and your car is on the parking brake before connecting the product.
9. Please unfold the coiled/tied-up cable first before using it.
10. Keep the black and red cables separated to prevent short circuits.
11. For your safety, please wear gloves when using the product to avoid electric shocks.
12. Do not use the product to jump-start your vehicle when its battery is damaged or over-discharged.
13. Do not leave the jump cable connected to the car battery when storing.
14. In case a leakage occurs or a bad odor is detected please stay away from the product. Please thoroughly rinse your eyes if the liquid enters your eyes.

WARRANTY INFORMATION

1. We offer a limited warranty for this product against any defects in material and workmanship for 12 months from the date of the factory. The conditions of the warranty are as follows.
2. The warranty is only valid upon presentation of the original receipt (from the dealer/retailer) by the original purchaser with the product to be repaired or replaced.
3. The warranty is invalid if the serial number, date of purchase, and label have been removed.
4. The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, modification, or repairs by unauthorized third parties.
5. We do not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure.
6. We are not liable for any incidental or consequential damages arising from the use or misuse of the product.
7. All warranty claims are limited to the repair or replacement of defective products and are at our sole discretion.
8. If we repair or replace the product, the product will be covered for the remaining time of the original warranty period.
   • Repair or replacement may involve the use of reconditioned units that are equivalent in function.
   • Replaced part or product becomes the property of.
9. Consumable components such as batteries and accessories are not covered by the warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>