VANMASS Wireless Charger Instruction Manual
- June 7, 2024
- VANMASS
Table of Contents
VANMASS Wireless Charger
Thank you for purchasing and using this product!
In order to bring you a better experience, please read this manual and refer
to your mobile phone or other electronic products instruction manual as well.
Product Specifications
| Product Name | Wireless charger |
|---|---|
| Model | CDRZ35 |
| Size | “(100x93xSS)mm |
| Net Weight | ,,929 |
| Input | SV=2A, 9V=l.8A |
| Output | SW I 7.SW I lOW |
| Charging Distance | “(4-6)mm |
| Application Model | Compatible with cellphones adopted Q, standard: iPhone, |
Samsung, LG, Mato etc.
Package Includes| Wireless charger x1, Charging cable x 1, Air vent clip xl,
Manual book xl
The parameters above are derived from the laboratory of VANMASS”‘.
The actual parameters would be different because of products and other
factors. The image shown here is indicative only.
Product Overview
Charging induction distance: The distance between cellphone’s inner magnetic induction coil and the wireless charger mount’s is about (4-6) mm. Please avoid using a too thick cellphone case.
Instructions
Instructions of the wireless charger’s pull-down structure
You can adjust the mobile phone holder hook’s position to align the phone’s center with the wireless charging lightning symbol.
Wireless charging area corresponding to different mobile phone models
How to use the air vent dip
-
Loosen the adjustable screw, adjust the mobile phone hook’s position to make it align with the lighting symbol of wireless charging. and then tighten the adjustable screw.
-
Unscrew the fixed nu l and choose the air vent clip, set the ball in the fixed nut . Push the head of the ball into the back of the car mount.
-
Tighten the nut clockwise. then it is able to adjust the angle of wireless charger.
-
Fix the wireless charger on the suitable place of outlet. There are two gears in the clip, and left or right can be selected. It is recommended that the thick wind leaf cho)se one
1 anrl thin choose two.
-
Put the cell phone ,n the wireless charger. Gravity linkage will lock the phone automatically, then the wireless charger starts to charge your mobile phone immediately.
-
You can take out your phone from the mount easily as shown in the picture.
Notes:
- Please install the car holder in a suitable place before starting driving navigation and do not operate and adjust the bracket during driving.
- This product supports three wireless charging modes: 7.Sw, lOW and SW. 7 SW model: Using QC2.0/QC3.0 adapter (9V = 1.67 A). it is compatible with iPhone 8/ iPhone8 plus/ iPhone X : lOW model: Using QC2.0/QC3.0 adapter(9V 167 A), it is compatible wi1h Samsung Galaxy S9/S9+/S8/S8+/57/57 edge/56 edge+/Note 9/Note 5 senes devices; SW model: Using SV = 2A adapter. it is for any Qi-enabled devices like iPhone X/iPhone8/iPhone8 plus and other Qi-enabled phones. Please select the most suitable adapter for your mobile phone.
- The wireless charger is only applicable to the cell phone screen size from 4″ to6.5″ and width less than 3.3″ Qi enabled mobile phones.
- Please do not put thick phone case over 0.12″(Like OtterBox, lifeProot UAG, Zizo, Spigen, Rugged case), metal ring, metal plate sticker, credit card and PopSockets on your phone.
- Please turn on car vent condition(fan) when it is a hot day or you need to use the item for a long time, which will help you to cool down the wireless charger and speed up charging process.
- Please turn off the screen and navigation and charge your phone for 10 minutes when your phone is in low power. Then open the navigation. It can avoid losing power very quickly.
- Not toys for fun, please keep it away from children.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used ,n accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to by to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>