xtorm Power Bank Dock Charge ‘N Go 6 User Manual
- June 7, 2024
- Xtorm
Table of Contents
xtorm Power Bank Dock Charge ‘N Go 6
SPECIFICATIONS & OVERVIEW
- Color: Black
- Dimensions Power Bank: 65 x 135 x 15mm
- Dimensions Base station: 305 x 185 x 202mm
- Input: 100-240V AC / 50-60 Hz
- Output AC adapter: 18V
- Output Power Bank: 6x5V/1.5A
- Battery capacity: 5000mAh
- Weight without AC adapter: 1000 grams
In The Box
-
1x AC Adapter
(100 – 240 V / 50 – 60 Hz)
-
Power Cord
(Optional UK/US/EU/AUS)
-
Charge ‘n Go 6 Base Station
-
User Manual
-
Power Bank
(5000mAh)
-
Charging Cables
2x USB C connector (20cm)
3x Micro USB connector (20cm)
3x Apple Lightning 8 pins connector” (20cm)
1x Apple 30 pins connector” (20cm)
*All Apple cables are certified by Apple.
DESCRIPTION AND FUNCTION
The Charge ‘n Go 6 is a charging solution ideal for hospitality venues, public places and events. Each Power Bank holds 5000mAh on a full charge.
INTENDED USE
Use this device only in dry or interior rooms. If you do not attend to the regulations and safety notes it might cause fatal accidents, injuries and damages to property.
NOTES ON SAFETY
ATTENTION! Only skilled electricians may assemble and disassemble the
housing of the product. There is a risk of electric shock and short circuit.
- This product is not a toy and is not meant for children. It contains small parts which can be swallowed and injure when used inappropriately.
- Please install the system and attached devices in a way that individuals cannot be injured and objects cannot be damaged for example by dropping and stumbling.
- Please remove the packing materials, because children may cut themselves on them while playing. Furthermore, there is a risk of swallowing and inhalation of incidentals and insulation material.
- To prevent fire or shock hazard avoid places with high temperature, or humidity, or places that may come in contact with water.
- Do not install the product near air conditioner openings, or places with an excessive amount of dust, smoke or vibrations.
- Place the product only on horizontal and flat surfaces to avoid falling.
- Do not modify or alter the product and accessories.
- Do not use any damaged parts.
- Plug and unplug all cables and adapters slowly and carefully.
- If trouble occurs, immediately disconnect the device from the wall socket.
- During transport, observe the details listed in the Chapter ‘Specifications’ and ‘Care, maintenance and transport’ and implement measures suitable for transport e.g. use of original package.
- For questions, defects, mechanical damages, malfunctions, and other functional problems which cannot be resolved by this manual, please contact your dealer for repair or replacement.
WARRANTY AND LIABILITY
- The manufacturer grants a 1 year warranty to a new device.
- Product warranty only applies to the product itself, as the manufacturer has no influence on installation.
- In case of any fault or damage to your device, please contact your dealer and if necessary provide your sales slip or invoice as evidence of the purchase. Your dealer will either repair the fault on site or send it to the manufacturer. The work of our technicians will be considerably easier when the fault is described in detail. If your dealer cannot be contacted, you can also contact the manufacturer directly.
- The manufacturer is not liable for damage to persons or property caused by improper installation or operation.
- Any use other than described in this user manual is not permitted, and causes loss of warranty, loss of guarantee and non-liability.
- We reserve our right for misprints and changes of the device, packing or user manual.
TROUBLE SHOOTING
Problem
|
Help
---|---
The device does not charge|
- When a device is fully charged it will automatically stop charging, therefore no charging is shown.
- Check all connections for tight fitting
Failure of the Female USB function| Make sure to use a fitting and compatible
USB charging cable
Other problems| Contact Xtorm at: +31 30 635 4800
NOTE ON WASTE DISPOSAL
According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. The consumer is committed by law to deposit electrical and electronic devices to a public collecting point or to the dealer at the end of the devices lifetime. Particulars are regulated in national right. The symbol shown on the product, in the manual or on the packaging refers to these terms. This way of disposing used devices contributes to environmental protection.
CONNECTING AND OPERATING
- Connect the included power cord to the AC adapter then to the Charge ‘n Go 6.
- Place the Power Banks in the slots for charging.
- Advertising board.
- Charging cables storage box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>