Maxell MXH-BTGD50 Wireless Earphone User Manual

Maxell MXH-BTGD50 Wireless Earphone

Thank you for purchasing this MAXELL product. Before use, make sure to read this Instruction Manual and use the product correctly and safely

Contents of the Package

Main Unit

Earpieces (S/M/L 2 units each) * M is attached to the main unit

|

Charging Cable (approx. 9cm) x 1

Pouch

|

User Manual

Introduction

About the user manual

• This Instruction Manual may be subject to change without prior notice.
• In order to improve the product, external appearance or part of the specifications may be subject to change without prior notice.

Disclaimer

• Maxell shall not be responsible for any damage caused by fires, earthquakes, action of a third party, any accidents, intended or unintended misuse or other usage under abnormal conditions.
• Maxell shall not be responsible for failure due to any damage caused by usage other than described in the instruction manual.
• This product is not being designed to be any equipment or device which could be concerned with human life such as medical device, nuclear device, astronomical device, transportation device etc., nor equipment or devices which requires high reliability. In case this product is used for the above equipment and/ or systems, Maxell do not responsible for any injuries or fire accident cause by the failure of this product
• This product is Japanese specification. We assume no responsibility if use outside Japan.

Safety Caution

Please strictly follow

Danger| If it is handled incorrectly, the user may suffer death or severe injury1 and the urgency is high.
---|---
Warning| If it is handled incorrectly, it is assumed that the user may suffer death or serious injury1.
Caution| If it is handled incorrectly, it is assumed that the user may suffer minor injury2 or there is a possibility that property damage3 may occur.”

1. Severe injury is indicated by those that have after effects such as blindness, injury, burns (high temperature burns/low temperature burns, chemical burns), electric shock, fracture, poisoning, etc. and those requiring hospitalization or long-term regular hospital visits for treatment
2. Minor injury refers to hurt, burnt, electric shock, etc. which do not result in hospitalization or long-term follow-up consultation
3. Property damage refers broad damages to houses or properties and domestic animals/ pets.

Examples of Symbol

| | stands for caution to fire, explosion, high temperature when handling the product. Details will be illustrated inside the symbol.
---|---|---
| stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or with written description next to it.
| stands for instruction which must be followed. Details will be illustrated inside or next to the symbol or with written description next to it.

DANGER

Take power only from the USB port

When charging, please use USB port of computer etc. or USB adapter. Using other power exceeding USB rating may result in heat generation, ignition, failure, electric shock or injury.
Do not touch leaked liquid

Please do not touch the leaked liquid. If liquid leaks from this device and gets into the eye, do not rub. Rinse with plenty of clean water immediately and consult a doctor. It may cause blindness.

WARNING

Do not use while driving a car, motorcycle, a bike, etc.

May cause traffic accident as hard to hear surroundings.
Do not use at locations where it will be dangerous if surrounding sounds cannot be heard

Even while walking, using it in where it will be dangerous if surrounding sounds cannot be heard (such as railway crossings, crosswalks, station platforms, roadways, construction sites, etc.) can cause unexpected serious accidents.
Do not use in locations where the use of wireless devices is prohibited

Radio waves may affect cardiac pacemakers and medical equipment. Please do not use in areas where use of wireless equipment is prohibited such as in hospitals or priority seat of trains etc.
Store properly at places out of children s reach

If the cord is swallowed or tangled around the neck, it may cause suffocation etc. In case of accident, seek medical attention immediately.
Do not place in direct sunlight or where the temperature is too high

The surface of equipment and parts may deteriorate, result in causing fire. Please take extra care in closed automobile in summer, or it is under direct sunlight or near a stove.
Do not put into fire

This may result in heat generation, ignition, breakage, leakage.
Do not put into water

This may cause fire or electric shock.
Do not repair, alter or disassemble these parts

Fire, electric shock, injury may occur.
Do not repair, alter or disassemble these parts

Fire, electric shock, injury may occur.
Turn off the power in case of abnormality

If smoke or strange smell or sounds comes out, or water or foreign object gets inside, or the product is dropped, please turn off the power immediately. Furthermore, if it is being charged via USB, unplug the USB connection. Continued usage may cause heat generation, ignition, malfunction, electric shock, etc.
If the charging is not completed even after exceeding the predetermined charging time, stop charging

It may cause leakage, overheating, fire or breakage.

CAUTION

Do not increase the volume too much

Continuously listening to loud volume can result in overstimulation of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning, the sudden loud sounds may harm ears. Before using, please reduce the volume of the connected device.
Discontinue use when it does not   t your skin

Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical attention.
Do not force the earphones into your ear

It may hurt your ear hole
Charge and use within the temperature range of 5~40oC

Charging and using at temperatures outside this range may cause leakage, overheating, breakage, or malfunction.
Make sure the USB connector does not get dusty

Please remove dust and dirt regularly. Otherwise it may cause overheating or fire.

Note on wireless use

This device uses 2.4 GHz frequency band. This frequency band is also used by internal radio stations (radio stations that requires a license), specific low-power radio stations (radio stations that do not require a license) and amateur radio stations (radio stations that requires a license) for moving object identification that are used in industrial, scientific, and medical equipment such as microwave ovens as well as factory manufacturing lines.

1. Before using this device, make sure that any internal radio station, any specific low power radio station or any amateur radio station for moving object identification are not operated nearby.
2. In the unlikely event of radio interference to an internal radio station for moving object identification from the device, immediately change the location of use or stop the emission of radio waves.
3. In addition, when any troubles arise such as radio interference to a specific low-power radio station or an amateur radio station for moving object identification from this unit happened, please contact our company’s “Customer Service Center”.
4. This unit is certified as a low-power data communication system based on the Radio Law. Therefore, you do not need a wireless station license to use this machine. However, it is prohibited to disassemble, remodel or erase the certification making on the product.
5. Please do not use in areas where use of mobile phone and wireless equipment is prohibited such as in hospitals or priority seat of trains etc.
   This radio equipment uses the 2.4 GHz band. The FHSS modulation method is adopted as the modulation method, and the interference distance is 10 m.

Name of Each Part

Main Unit

Controller

Battery Case

Preparation