My OptiClean®/PurePro®/Trilogy®/TripleClean Professional® Multi Cyclonic Pet Vacuum has no suction | Support
- June 7, 2024
- Bissell
Table of Contents
-
Turn off and unplug machine
-
Slide the Lock ‘n Seal lever to “unlock” position to remove dirt tank and empty
-
Grasp inner cyclone screen in upper tank and twist to the right to unlock
- Inner cyclone, screen, and tank may be wiped with damp cloth to clean
- Allow to air dry completely before reinstalling
-
Slide out tray beneath dirt tank and remove foam pre-motor filter
- Pre-motor filter may be washed in cold water with mild detergent
- Allow to air dry completely before reinstalling
-
Recline machine and push button on post-motor filter door located below pre-motor filter tray
- Post-motor filter is NOT washable and will need to be replaced if dirty
-
Remove hose from back of machine by twisting hose collar to the left and pull hose wand out of base
- Run a broomstick through hose to clear any clogs
- If hose is cracked or damaged, it will need to be replaced
-
Remove screw from left of lower hose to lay lower hose flat
- Run a broomstick through lower hose to clear any clogs
- If machine still has no suction, visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......