KENT KVC-S1023 Vacuum Cleaner User Guide

: June 7, 2024
: Kent

KENT Crystal Vacuum Cleaner KVC-S1023

Instruction Handbook for Installation, Operation and Maintenance.

Multi functional appliance for cleaning of

cleaning vacuum vacuum

Welcome to KENT

Dear Customer,

At the outset, allow us to thank you for your trust in KENT Crystal
Vacuum Cleaner. At KENT, we take pride in our reputation for product
quality and industry proven performance. We are certain that your
decision to own KENT Crystal Vacuum Cleaner will go a long way
towards keeping you and your family in good health. We are confident
that you will be more than satisfied with its performance and that it
will serve your need for safer and cleaner living without any
compromise.

This guide would help you in getting the best out of your
KENT Crystal Vacuum Cleaner. Please go through the booklet to
familiarize yourself with operation and maintenance.

You can look forward to years of trouble free service. To ensure that
the warranty of your KENT Crystal Vacuum Cleaner is effective, it is
important that you fill up the enclosed warranty card and mail it to us
within 15 days of purchase.

In case you require any further information, please contact your
nearest KENT dealer / branch.

Happy Cleaning

KENT RO System Ltd.

Introduction

We at KENT have always believed that a clean and healthy life is a right of every
individual. This ethos made us embark on the journey to develop innovative solutions
for cleaning water we drink, fruits & vegetable we eat and the air we breathe. Using
innovative technology and supported by a proficient service network, we have been
able to create a brand which has become synonymous for well-being and health.

Continuing with the tradition, we now present the KENT Crystal Vacuum Cleaner,
with futuristic and state-of-the-art Cyclonic technology and HEPA filters to provide
clean, dust-free and spotless surroundings.

In KENT Crystal Vacuum Cleaner the air and dust are sucked at high speed creating
a fast-spinning vortex while the dust is separated in a detachable cylindrical
collection vessel or bin. The HEPA filter in KENT Crystal Vacuum Cleaner reduces
the air pollution in the room with lower dust discharge.

Features of KENT Crystal Vacuum Cleaner

Advanced Cyclonic Technology (without filtration bags) for dust collection
and HEPA [High Efficiency Particulate Arrestance) based discharge filter.
High efficiency motor with strong suction force for efficient cleaning.
High efficiency HEPA filter.
Reduces air pollution due to lower dust and particulate matter (PM) discharge.
Multi functional Vacuum Cleaner.
Compact & handy.
Rubberized wheels.
Lightweight & easy to handle.
Lower noise.

Know Your Product

parts vacuum

Items in the Box

1. KENT Crystal Vacuum Cleaner : 01 No.
2. Extension Tube : 01 No.
3. Crevice Tool : 01 No.
4. Floor/Carpet Brush : 01 No.
5. User Guide : 01 No.

Assembling Your KENT Crystal Vacuum Cleaner

Unpack the unit and remove any stickers that can prevent unit operation.
Check the unit for damages. Do not use it in case of any damages
Before switching the unit on, make sure that your home’s main
voltage corresponds to the unit’s operating voltage.

Attaching/Detaching

Extension tube

Hold the tube by it’s handle and push it inside slowly.
You will hear a ‘Click’ sound indicating that the tube is properly inserted
To detach, gently press the button and pull out slowly.

Connecting handle

Attach the handle to the tube by pushing it. You will hear a ‘Click’
sound indicating that the handle is properly inserted.
To detach, gently press the button and pull out slowly.

Connecting the tube, brush and motor

Insert the upper end of the tube to the body. You will hear a
‘Click’ sound indicating that the tube is properly inserted.
Attach the other end to the brush as shown in the figure.
To detach, gently press the button and pull out slowly.

Connecting the Crevice tool

Insert the crevice tool into the body. You will hear a
‘Click’ sound indicating that the tool is properly inserted.
To detach, gently press the button and pull out slowly.

Connecting the Floor/Carpet Brush to the main body

Attach the brush to the main body as shown in the figure. Insert the
crevice tool into the body. You will hear a ‘Click’ sound indicating that
the brush is properly inserted
To detach, gently press the button and pull out slowly.

Adjustment in Floor/Carpet Brush
Adjust the settings by pressing the adjustment latch located on the carpet brush:

a. To use the brush on hard floor, extend the brush
b. For use on carpets or rugs, retract the brush.

Note: Always remove the plug from the power socket before fitting or removing
accessories.

extension tube

Using your KENT Crystal Vacuum Cleaner

To use the appliance, rotate the hook 180”
and remove the power cord. Connect the power
cord to the corresponding power socket.
Press on/off button to switch on your appliance.
After use, switch the appliance off and unplug the
cord, Adjust the hook to the position as shown in
picture and wind the cord to the hook.
Store in an upright position.

Using the Accessories

The Crevice tool is ideal for cleaning surfaces
that are difficult to clean otherwise, such as
radiators, couch corners and cushion edges.
The Hard Brush can be used for cleaning both,
hard floors and carpets
Use the appliance in hand-held mode to clean
the surfaces of furniture, floors, walls and curtains, etc.

Note: Always remove the plug from the power socket
before fitting or removing accessories.

Important Instructions

Do not operate the vacuum cleaner too close to heaters, radiators,
cigarette butts, etc.
Do not plug or unplug the device with wet hands.
Before using the vacuum cleaner, remove large or sharp objects
from the floor to prevent damage of HEPA filter.
While unplugging, do not pull the electrical cord. Pull out the plug.

Note: If the suction pipe or metal telescopic tube is blocked, switch off
the vacuum cleaner at once. Unplug the appliance before clearing the
blockage. Once done, you can start the vacuum cleaner again.

Cleaning and Maintenance

Switch off and unplug the appliance before cleaning it.
Note: Never use gasoline, solvent, abrasive cleaning agents, metal objects or
hard brushes to clean the appliance.

Emptying Dust Container

It is necessary to empty the dust container when it is 2/3 filled

To empty the dust container, remove the filters [one by
one] as shown in the figure.
Empty the container in a dust bin or trash can.
Reinsert the filter assembly.

dust container

Washing and Cleaning of Filters

For trouble-free operations, it is important to clean the filters regularly.
Step 1: Remove the HEPA & Foam filters (one by one) as
shown in the figure.
Step 2: Clean and wash under running water.
Step 3: After washing the Foam filter, gently wring it
and leave it to dry.
Step 4: Dry the HEPA filter by placing it either on the
table or on the floor.

Storage

If you do not intend to use the appliance for a long time, store it carefully.
Unplug the appliance.
Wind the cord to the hook of the cord and place the crevice tool in the accessory holder.
Place the appliance in an upright position.
Keep the appliance out of the reach of children.

General Safety Instructions

When using an electrical appliance, basic precaution should always be followed,
including the following:

Do not leave the vacuum cleaner on when plugged in. Unplug, when not in
use and before servicing it.
To reduce risk of electric shock, do not use on wet surfaces.
Use the appliance only as described in the operating instruction manual.
Always use manufactures recommend attachments only.
Do not use the appliance if cord or plug is damaged or worn out. Replace
the damaged cord or plug immediately.
Do not try to service the appliance on your own. Send it to an authorized
service center.
Never use the cord as a handle, close a door on the cord, or pull the cord
around sharp edges or corners. Keep the cord away from heated surfaces.
Do not unplug the cord by pulling it. Always unplug by pulling out the plug.
To avoid electric shocks, do not use the appliance with wet hands.
Keep hair, loose clothing, fingers and all parts of body away from moving parts.
Turn the appliance off before unplugging.
Use extra precautions while cleaning stairs.
Do not use the appliance to pick any flammable or combustible liquids,
such as gasoline. Do not use in areas where they may be present.
Unplug the appliance before connecting any accessories.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot-ash.
Never use the appliance without the filter in place.
If the supply cord is damaged, it must be replaced by the manufacturer,
it’s service agent or a similarly qualified person in order to avoid a hazard.
This appliance is suitable for indoor use only.
Keep away from children

Warning: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug
[one blade is wider than the other]. This plug will fit in a polarized outlet only one way.
If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the plug in the outlet. Do not change the plug in any way.