8BitDo USB Adapter for PS classic User Guide

USB Adapter for PS classic

For PS4 controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink)
2. Press and hold the Share and PS buttons until the lightbar begins to strobe quickly in
3. Wait until your Retro Receiver’s LED is solid blue and the controller’s lightbar stay
4. For the next connection only need to press the PS button and wait until the receiver’s LED is solid
   *Key command for switching between two levels: L1 + R1 + SHARE*
   Hot key: Reset = PS button, In-game menu: L1 + R1 + OPTIONS**

8BitDo USB Wireless Adapter Functionality Chart

Quick change mode

1. Connect your controller to the USB Adapter. Your controller may need to be reconnected after switching mode.
   Switch: Automatic.
   X-input: press and hold SELECT + UP for 3 seconds.
   D-Input: press and hold SELECT + LEFT for 3
   mac0S: press and hold SELECT + RIGHT for 3 seconds.
   PS classic: press and hold SELECT + DOWN for 3 seconds

For PS3 controller

1. Download and Run 8BitDo USB Adapter Tools on your PC available for Mac and
2. 0n your Retro Receiver, hold down the pairing button and connect it to your MAC/PC via
3. Connect your PS3 controller to MAC/PC via
4. Once your Retro Receiver and PS3 controller are both connected via USB, click the “Pair” button in the
5. Once pairing is complete, you can insert your Retro Receiver into your
6. Now press the PS button on your PS3
7. Wait until your Retro Receiver’s LED is solid blue and the controller’s #1 LED stay
8. To re-sync after powering your console down, begin from step
   *Hotkey: Reset = PS button, In-game menu: L1 + R1 + START

For Xbox One S/X Bluetooth controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink).
2. Press the HOME button to turn on your Xbox One S/X Bluetooth controller and then press bind
3. Wait until both LEDs on the USB Adapter and controller stay
4. A USB adapter will auto-reconnect to the controller when you turn back on the controller with the HOME button

*Vibration is supported on Switch and X-input*
Hotkey: Reset = HOME button, In-game menu: LB + RB + START**

For 8Bitdo controllers

SN30 Pro/N30 Pro2/SN30 v2:

1. Press B + START to turn on your SN30 Pro
2. Press both PAIR buttons on the receiver and controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully
   *Hotkey: Reset = Home, In-game menu: L1 + R1 + START

N30 Pro:

1. Press POWER to turn on your
2. Press both PAIR buttons on the receiver and controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully
   *Hotkey: Reset = SELECT + DOWN, In-game menu: L1 + R1 + START

N30/F30/SN30/SF30/Zero:

1. Press START to turn on your
2. Press both PAIR button on the receiver and SELECT on the controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully
   *Hotkey: Reset = SELECT + DOWN, In-game menu: L + R + START

N30 Arcade Stick:

1. Press X + START to turn on your arcade
2. Press both the PAIR button on the receiver and arcade stick to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully
   *Hotkey: Reset = SELECT + DOWN, In-game menu: L1 + R1 + START

Wii Remote/Wii MotionPlus controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink]
2. Press the Wii Remote/Wii MotionPlus controller’s sync
3. Wait until your Retro Receiver’s LED is solid blue and the controller’s #1 LED stay
4. To re-sync after powering your console down.
   *For Wii Remote: press1 and 2*
   For Wii MotionPlus: press A**
   *Hotkey: Reset = Home

Wii U Pro controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly
2. Press your Wii U Pro controller’s sync
3. Wait until your Retro Receiver’s LED is solid blue and the controller’s #1 LED stay
4. For the next connection only need to press A
   *Hotkey: Reset = Home, In-game menu: L1 + R1 + START

  USB Adapter for Switch
lnstruction Manual

For PS4 controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink
2. Press and hold the Share and PS buttons until the lightbar begins to strobe quickly in double.
3. Wait until your USB Adapter’s LED is solid blue and the controller’s lightbar stay
4. For the next connection only need to press the PS button and wait until the receiver’s LED is solid
   *Key command for switching between two levels: L1 + R1 + SHARE

For Xbox One S/X Bluetooth controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink).
2. Press the HOME button to turn on your Xbox One S/X Bluetooth controller and then press bind
3. Wait until both LEDs on the USB Adapter and controller stay
4. A USB adapter will auto-reconnect to the controller when you turn back on the controller with the HOME button
   *Vibration is supported on Switch and X-input mode

For Wii U Pro controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly blink).
2. Press your Wii U Pro controller’s sync
3. Wait until your USB Adapter’s LED is solid blue and the controller’s #1 LED stay
4. For the next connection only need to press A

For PS3 controller

1. Download and Run 8BitDo USB Adapter Tools on your PC available for Mac and
2. 0n your USB Adapter, hold down the pairing button and connect it to your MAC/PC via
3. Connect your PS3 controller to MAC/PC via
4. Once your USB Adapter and PS3 controller are both connected via USB, click the “Pair” button in the
5. Once pairing is complete, you can insert your USB Adapter into your
6. Now press the PS button on your PS3
7. Wait until your USB Adapter’s LED is solid blue and the controller’s #1 LED stay
8. To re-sync after powering your console down, begin from step

For Wii Remote/Wii MotionPlus controller

1. Insert USB Adapter into the console and then press the pairing button (the LED will rapidly
2. Press the Wii Remote/Wii MotionPlus controller’s sync
3. Wait until your USB Adapter’s LED is solid blue and the controller’s #1 LED stay
4. To re-sync after powering your console
   *ForWii Remote: press 1 and 2*
   Wii MotionPlus: press A button**

For 8BitDo controllers

SN30 Pro/N30 Pro2/SN30 v2:

1. Press B + START to turn on your SN30 Pro/SF30 Pro
2. Press both PAIR buttons on the receiver and controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully

N30 Pro:

1. Press POWER to turn on your
2. Press both PAIR buttons on the receiver and controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully

N30/F30/SN30/SF30/Zero:

1. Press START to turn on your
2. Press both PAIR button on the receiver and SELECT on the controller to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully

N30 Arcade Stick:

1. Press X + START to turn on your arcade
2. Press both the PAIR button on the receiver and arcade stick to sync
3. Both LEDs on the receiver and controller will become solid when they are successfully

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>