HuddleCamHD HCM-1 Small Base Camera Wall Mount User Guide

June 7, 2024
HuddleCamHD

HuddleCamHD HCM-1 Small Base Camera Wall Mount User Guide
HuddleCamHD HCM-1 Small Base Camera Wall Mount

What’s Included

  • QTY 1—Small Wall Mount BK/WH
  • QTY 4—10-12 x 1″ Conical Plastic Anchor 1/4″ Drill Size (Fig 1, #1)
  • QTY 4—#10-16x 1 1/4″ PPH Sheet Metal Screw with Flat Washer (Fig 1, #2)
  • QTY 4—#6-32x 1″ PPH Machine Screw with Flat Washers (Fig 1, #3)
  • QTY 1—1/4”-20x 3/8” PPH and QTY 2—1/4” Machine Screw Flat Washer (Fig 1, #4)

What is in the Box

Mounting Instructions

Step 1

For masonry or drywall wall:

Position small wall mount (Fig 2) on wall and mark wall for anchor placement (Fig 2, # 1). Pre-drill 1/4″ holes, minimum 1” deep.

For double gang electrical box:

Position over box with slots overlaying device mounting holes (Fig 2, #1) on box.

Step 2

For masonry or drywall wall:

Place included anchors (Fig 1, #1) in wall and mount to anchors using included #10 sheet metal screws. (Fig 1, #2)

For double gang electrical box:

Mount to box using #6 machine screws and washers. (Fig 1, #3)

Product Overview

Step 3

Drill hole in wall through rear exit opening for cable access, or use base exit opening. (Fig 2, #2)

HuddleCamHD HCM-1 Small Base Camera Wall Mount

Step 4

Mount Camera to mount (Fig 2, #3) with included 1/4-20 machine screw. (Fig 1, # 4)

Utilize (0,1,2) 1/4” machine screw flat washers as required. **(Fig 1,

4)** Note: 1/4” machine screw flat washers are to be  used depending upon

depth of thread insert  in base of camera, in order to achieve a snug fit. Pass all cables through opening in mount (Fig 2, #2) and connect.

Mount Compatibility

HuddleCamHD

  • HC-WEBCAM-94
  • HC-GO
  • HC-EPTZ-XXX
  • HC3X-XX-G2
  • HC3XA-XX
  • HC3XW-XX-G2
  • HC10X-USB2-XX
  • HC10XA-XX
  • HC10X-XX-G3
  • HC20X-XX-G2

PTZOptics

  • PT-WEBCAM-80
  • PTEPTZ-XXX-ZCAM
  • PTVL-XXX-ZCAM
  • PT12X-XXX-ZCAM
  • PT20X-XXX-ZCAM
  • PT12X-XXX-XX-G2
  • PT20X-XXX-XX-G2
  • PT30X-XXX-XX-G2

Other Cameras…

This mount has been designed for use with most small based cameras utilizing a 1/4-20” mounting hole as can be found on SONY, Panasonic, Cisco, Polycom and Vaddio cameras.

For more information on HuddleCamHD mounts and other products please visit: https://huddlecamhd.com

QR Code Scanner

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals