SENSI Thermostat Navigation and Scheduling User Guide

SENSI Thermostat Navigation and Scheduling

APP NAVIGATION

The Sensi app allows you to remotely control your thermostat when connected to your Wi-Fi network. After installing your Sensi thermostat, your app dashboard will look like what you see below. You can edit account information, add another thermostat and quickly adjust the temperature on any thermostat on your account. To edit individual thermostat settings or features, select that thermostat name.

1. ADD DEVICE
   Tap the plus (+) sign to add an additional thermostat. You can also use the + sign to reconnect Sensi to Wi-Fi.

2. ACCOUNT INFORMATION
   Edit your email address and password, opt in or out of thermostat alerts, access our help center, leave feedback or log out. (This will be 3 vertical dots on Androids.)

3. THERMOSTAT NAME
   Tap your thermostat name to go into the main control screen for that individual thermostat.

4. TEMPERATURE CONTROL
   Check your current set temperature and quickly adjust it using the up and down arrows.

1. THERMOSTAT NAME

2. SETTINGS
   Access all the advanced settings and features including
   AC Protection, Temperature and Humidity Offset, Keypad Lockout, Humidity Control, Service Reminders, and Cycle Rate. You can also adjust the temperature scale settings in Display Options, and see some thermostat information in About Thermostat.

3. WEATHER
   Local weather based on the location information
   you provided when you registered.

4. SET TEMPERATURE

5. SCHEDULE PROJECTION
   View a snapshot of your upcoming schedule for the day.

6. USAGE DATA
   Here you can see how many minutes and hours your system has run

7. SCHEDULING OPTIONS
   Turn on and edit a schedule or try geofencing.

8. FAN MODE OPTIONS
   Toggle your fan settings and adjust circulating fan options.

9. SYSTEM MODE
   Change your system mode as needed.

10. ROOM TEMPERATURE

SCHEDULING

Scheduling can save you time and money by automatically following a set schedule you determine. Each individual thermostat can have its own schedule. The following steps will walk you through how to set up, edit, and turn on a schedule.
If a programmed schedule doesn’t fit your lifestyle, you also have the option to turn on geofencing (temperature control based on whether you’re home or not). The geofencing feature is located under the scheduling tab. For all information on geofencing, visit the support section of emerson.sensi.com and search “geofencing.”

1. Select the thermostat you want to edit.

2. Tap Schedule.
   

3. Tap Edit Schedule to view all of your schedules. Your schedules are organized by system mode. You can choose to edit an existing schedule or create a new schedule. For example: Create or edit a Cool Mode schedule. After you’re done with Cool Mode, go back and check out your Heat Mode schedules.
   Note: The schedule that has a check mark next to it is the
   active schedule to run in that mode. You must have one active
   schedule per system mode whether you’re using it or not.

4. View and edit your schedules, or create a new schedule for a specific system mode.

   • VIEW/EDIT EXISTING SCHEDULE:

   • Tap the button to look at this schedule ANDROID:
     Tap on the 3 vertical dots and select Edit.

   • CREATE NEW:

   • Tap Create Schedule for the select system mode.
     ANDROID: Tap the + sign.
     

5. When creating a new schedule, you can either copy an existing schedule by tapping Copy or create a new schedule from scratch by tapping New Schedule.
   

6. At Edit Schedule, you can group days that you want to have the same time and temperature set points. Create/modify any day groupings you need – Monday through Friday, Saturday and Sunday – or any grouping that fits your lifestyle.

   • ADD A GROUPING:
     Simply tap Create New Daygroup at the bottom of the screen. Then select the day(s) of the week you want to move to a different grouping.

   • DELETE A GROUPING:
     Tap the trashcan icon above to remove the day grouping. Those days will be moved back up into the top grouping.
     ANDROID:
     Tap Delete Daygroup on the particular day group you want to remove.
     

7. Manage your time and temperature set points through Events.

   • CREATE AN EVENT:
     Tap on Add Event to add a new setpoint.

   • EDIT EVENT:
     Adjust the start time to your choosing and then use the +/- buttons to adjust the set temperature.

   • Tap Done to go back and manage more of your Events.

   • DELETE EVENT:
     Tap on any Event you don’t want anymore and use the Delete Event option to remove it from your schedule.
     

8. Press Done in the upper left hand corner to return to the
   day groupings and edit any other day groupings.

9. When you’re completely done editing your schedule
   press Save to return to the Schedule screen.
   

10. Make sure the check mark is next to the schedule that you want to run and tap Done to return to the main scheduling page.
    Android: Make sure the circle is highlighted next to the schedule you want to run and tap the back arrow button to return to the main scheduling page.

11. Make sure you’ve got Programmed Schedule selected so your
    Sensi thermostat can run your new schedule. Press Done.
    

12. A timeline of your set points will appear on your thermostat control screen.
    

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>